3.16.7-ckt16 -stable review patch. If anyone has any objections, please let me know.
------------------ From: Alessio Igor Bogani <[email protected]> commit 304f0a98d168563b5f69c53a7544c36e6d221ac4 upstream. The commit 0718e59ae259 ("mmc: sdhci: move FSL ESDHC reset handling quirk into esdhc code") states that Freescale esdhc is the only controller which needs the interrupt registers restored after a reset. So it moves SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET quirk handling code into the esdhc-imx driver only. Unfortunately the same controller is used in other boards which use the of-esdhc driver instead (like powerpc P2020). Restore interrupts after reset in the sdhci-of-esdhc driver also. Signed-off-by: Alessio Igor Bogani <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: Luis Henriques <[email protected]> --- drivers/mmc/host/sdhci-of-esdhc.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 8be4dcfb49a0..fdc27327aece 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -276,6 +276,14 @@ static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) ESDHC_CTRL_BUSWIDTH_MASK, ctrl); } +static void esdhc_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +} + static const struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl, .read_w = esdhc_readw, @@ -290,7 +298,7 @@ static const struct sdhci_ops sdhci_esdhc_ops = { .platform_init = esdhc_of_platform_init, .adma_workaround = esdhci_of_adma_workaround, .set_bus_width = esdhc_pltfm_set_bus_width, - .reset = sdhci_reset, + .reset = esdhc_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, }; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
