On Thu, Aug 27, 2015 at 12:37 PM, Bjorn Andersson
<bjorn.anders...@sonymobile.com> wrote:
> This documents a device tree binding for exposing the Qualcomm Shared
> Memory State Machine as a set of gpio- and interrupt-controllers.
>
> Signed-off-by: Bjorn Andersson <bjorn.anders...@sonymobile.com>
> ---
> .../devicetree/bindings/gpio/qcom,smsm.txt | 114
> +++++++++++++++++++++
> drivers/gpio/Kconfig | 8 ++
> drivers/gpio/Makefile | 1 +
Presumably this goes in patch 2.
> 3 files changed, 123 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/qcom,smsm.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/qcom,smsm.txt
> b/Documentation/devicetree/bindings/gpio/qcom,smsm.txt
> new file mode 100644
> index 000000000000..06201ba76594
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/qcom,smsm.txt
> @@ -0,0 +1,114 @@
> +Qualcomm Shared Memory State Machine
> +
> +The Shared Memory State Machine facilitates broadcasting of single bit state
> +information between the processors in a Qualcomm SoC. Each processor is
> +assigned 32 bits of state that can be modified. A processor can through a
> +matrix of bitmaps signal subscription of notifications upon changes to a
> +certain bit owned by a certain remote processor.
Are all the bits s/w driven, but somehow fixed in their functional definition?
> +This document defines the binding for a driver that implements and exposes
> this
> +a GPIO controller and a set of interrupt controllers.
I imagine Linus will have thoughts about that.
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be one of:
> + "qcom,smsm"
There are not versions of the h/w?
> +
> +- qcom,ipc-N:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: three entries specifying the outgoing ipc bit used for
> + signaling the N:th remote processor
> + - phandle to a syscon node representing the apcs registers
> + - u32 representing offset to the register within the
> syscon
> + - u32 representing the ipc bit within the register
> +
> +- qcom,local-host:
> + Usage: optional
> + Value type: <u32>
> + Definition: identifier of the local processor in the list of hosts, or
> + in other words specifier of the column in the subscription
> + matrix representing the local processor
> + defaults to host 0
> +
> +- #address-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 1
> +
> +- #size-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 0
> +
> += SUBNODES
> +Each processor's state bits are described by a subnode of the smsm device
> node.
> +A node can either be a gpio-controller - denoting the local processors bits -
> +or an interrupt-controller - denoting a remote processors state bits. The
> node
> +names are not important.
> +
> +- reg:
> + Usage: required
> + Value type: <u32>
> + Definition: specifies the offset, in words, of the first bit for this
> + entry
> +
> +- gpio-controller:
> + Usage: required for local entry
> + Value type: <empty>
> + Definition: marks the entry as a gpio-controller and the state bits to
> + belong to the local processor
> +
> +- #gpio-cells:
> + Usage: required for local entry
> + Value type: <u32>
> + Definition: must be 2 - denotes bit number and GPIO flags
> +
> +- interrupt-controller:
> + Usage: required for remote entries
> + Value type: <empty>
> + Definition: marks the entry as a interrupt-controller and the state
> bits
> + to belong to a remote processor
> +
> +- #interrupt-cells:
> + Usage: required for remote entries
> + Value type: <u32>
> + Definition: must be 2 - denotes bit number and IRQ flags
> +
> +- interrupts:
> + Usage: required for remote entries
> + Value type: <prop-encoded-array>
> + Definition: one entry specifying remote IRQ used by the remote
> processor
> + to signal changes of its state bits
> +
> +
> += EXAMPLE
> +The following example shows the SMEM setup for controlling properties of the
> +wireless processor, defined from the 8974 apps processor's point-of-view. It
> +encompasses one outbound entry and the outgoing interrupt for the wireless
> +processor.
> +
> +smsm {
> + compatible = "qcom,smsm";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + qcom,ipc-3 = <&apcs 8 19>;
> +
> + apps_smsm: apps@0 {
> + reg = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + wcnss_smsm: wcnss@7 {
> + reg = <7>;
> + interrupts = <0 144 1>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index b4fc9e4d24c6..0e57b60faae8 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -354,6 +354,14 @@ config GPIO_PXA
> help
> Say yes here to support the PXA GPIO device
>
> +config GPIO_QCOM_SMSM
> + bool "Qualcomm Shared Memory State Machine"
> + depends on QCOM_SMEM
> + help
> + Say yes here to support the Qualcomm Shared Memory State Machine.
> + The state machine is represented by bits in shared memory and is
> + exposed to the system as GPIOs.
> +
> config GPIO_RCAR
> tristate "Renesas R-Car GPIO"
> depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index f79a7c482a99..0fd213892403 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -75,6 +75,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
> obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
> obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
> obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
> +obj-$(CONFIG_GPIO_QCOM_SMSM) += gpio-qcom-smsm.o
> obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
> obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
> obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
> --
> 1.8.2.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
