Hi Heiko,
在 09/02/2015 05:00 AM, Heiko Stuebner 写道:
Hi Yakir,
Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v4:
- Remove some deprecated DT properties in rockchip dp document.
Changes in v3:
- Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
core driver which name to "dp", and leave "pclk_edp" to rockchip dp
platform driver which name to "pclk".
- Take Heiko suggest, add devicetree binding document.
- Take Heiko suggest, remove "rockchip,panel" DT property, take use of
remote point to get panel node.
- Add the new function point analogix_dp_platdata.get_modes init.
Changes in v2:
- Take Heiko suggest, get panel node with remote-endpoint method,
and create devicetree binding for driver.
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
leave those clock to rockchip dp phy driver.
.../bindings/video/analogix_dp-rockchip.txt | 74 ++++
drivers/gpu/drm/rockchip/Kconfig | 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 389
+++++++++++++++++++++ 4 files changed, 473 insertions(+)
create mode 100644
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
diff --git
a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
mode 100644
index 0000000..502483e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---------------------------------------------------------------------------
---- +
+Example:
+ dp-controller: dp@ff970000 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <&grf>;
+ resets = <&cru 111>;
+ reset-names = "dp";
+
+ status = "disabled";
+
+ ports {
#address-cells = <1>;
#size-cells = <0>;
Done,
+ edp_in: port {
edp_in: port@0
reg = <0>;
Done,
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>
+ };
+ };
+ };
+ };
+
diff --git a/drivers/gpu/drm/rockchip/Kconfig
b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..c2ba945 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_ANALOGIX_DP
+ tristate "Rockchip specific extensions for Analogix DP driver"
+ depends on DRM_ROCKCHIP
+ select DRM_ANALOGIX_DP
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Analogix Core DP driver. If you want to enable DP
+ on RK3288 based SoC, you should selet this option.
diff --git a/drivers/gpu/drm/rockchip/Makefile
b/drivers/gpu/drm/rockchip/Makefile index f3d8a19..8ad01fb 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
rockchip_drm_fbdev.o \ rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
index 0000000..cebff9e
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -0,0 +1,389 @@
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy....@rock-chips.com>
+ * Yakir Yang <y...@rock-chips.com>
+ * Jeff Chen <jeff.c...@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_of.h>
+#include <drm/drm_dp_helper.h>
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_graph.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/bridge/analogix_dp.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define encoder_to_dp(c) \
+ container_of(c, struct rockchip_dp_device, encoder)
+
+#define plat_data_to_dp(pd) \
+ container_of(pd, struct rockchip_dp_device, plat_data)
+
+/* dp grf register offset */
+#define GRF_GPIO7B_IOMUX 0x0070
+#define GPIO7B3_SEL_MASK (0x03 << 6)
+#define GPIO7B3_SEL_EDP_HOTPLUG BIT(7)
please remove, see comment near pre_init
Okay,
+
+#define GRF_SOC_CON6 0x025c
+#define GRF_EDP_LCD_SEL_MASK BIT(5)
+#define GRF_EDP_SEL_VOP_LIT BIT(5)
+#define GRF_EDP_SEL_VOP_BIG 0
+
+struct rockchip_dp_device {
+ struct drm_device *drm_dev;
+ struct device *dev;
+ struct drm_encoder encoder;
+ struct drm_display_mode mode;
+
+ struct clk *pclk;
+ struct regmap *grf;
+ struct reset_control *rst;
+
+ struct analogix_dp_plat_data plat_data;
+};
+
+static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
+{
+ u32 val;
+ int ret;
+
+ val = GPIO7B3_SEL_EDP_HOTPLUG | (GPIO7B3_SEL_MASK << 16);
+ ret = regmap_write(dp->grf, GRF_GPIO7B_IOMUX, val);
this is just a regular pinctrl setting. Please don't write onto other
components registers. Use a regular pinctrl setting in the devicetree instead.
Okay,
Thanks,
- Yakir
+ if (ret != 0) {
+ dev_err(dp->dev, "Could not config GRF edp hpd: %d\n", ret);
+ return ret;
+ }
+
+ reset_control_assert(dp->rst);
+ usleep_range(10, 20);
+ reset_control_deassert(dp->rst);
+
+ return 0;
+}
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
