On Mon, 7 Sep 2015 17:01:09 +0530
Vaibhav Hiremath <vaibhav.hirem...@linaro.org> wrote:
> There were some coding style issues where spaces have been used instead
> of tabs, for example, in macro definitions, alignment of function
> declarations/definitions, etc...
>
> This patch fixes all such occurrences in the code.
>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hirem...@linaro.org>
> ---
> drivers/mmc/host/sdhci-pxav3.c | 46
> +++++++++++++++++++++---------------------
> 1 file changed, 23 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index 946d37f..7a07177 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -39,24 +39,24 @@
> #include "sdhci.h"
> #include "sdhci-pltfm.h"
>
> -#define PXAV3_RPM_DELAY_MS 50
> +#define PXAV3_RPM_DELAY_MS 50
>
> -#define SD_CLOCK_BURST_SIZE_SETUP 0x10A
> -#define SDCLK_SEL 0x100
> -#define SDCLK_DELAY_SHIFT 9
> -#define SDCLK_DELAY_MASK 0x1f
> +#define SD_CLOCK_BURST_SIZE_SETUP 0x10A
> +#define SDCLK_SEL 0x100
> +#define SDCLK_DELAY_SHIFT 9
> +#define SDCLK_DELAY_MASK 0x1f
>
> -#define SD_CFG_FIFO_PARAM 0x100
> -#define SDCFG_GEN_PAD_CLK_ON (1<<6)
> -#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF
> -#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24
> +#define SD_CFG_FIFO_PARAM 0x100
> +#define SDCFG_GEN_PAD_CLK_ON (1<<6)
> +#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF
> +#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24
>
> -#define SD_SPI_MODE 0x108
> -#define SD_CE_ATA_1 0x10C
> +#define SD_SPI_MODE 0x108
> +#define SD_CE_ATA_1 0x10C
>
> -#define SD_CE_ATA_2 0x10E
> -#define SDCE_MISC_INT (1<<2)
> -#define SDCE_MISC_INT_EN (1<<1)
> +#define SD_CE_ATA_2 0x10E
> +#define SDCE_MISC_INT (1<<2)
> +#define SDCE_MISC_INT_EN (1<<1)
>
> struct sdhci_pxa {
> struct clk *clk_core;
> @@ -284,7 +284,7 @@ static void pxav3_set_uhs_signaling(struct sdhci_host
> *host, unsigned int uhs)
> * FE-2946959
> */
> if (pxa->sdio3_conf_reg) {
> - u8 reg_val = readb(pxa->sdio3_conf_reg);
> + u8 reg_val = readb(pxa->sdio3_conf_reg);
>
> if (uhs == MMC_TIMING_UHS_SDR50 ||
> uhs == MMC_TIMING_UHS_DDR50) {
> @@ -304,20 +304,20 @@ static void pxav3_set_uhs_signaling(struct sdhci_host
> *host, unsigned int uhs)
> }
>
> static const struct sdhci_ops pxav3_sdhci_ops = {
> - .set_clock = sdhci_set_clock,
> - .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> - .set_bus_width = sdhci_set_bus_width,
> - .reset = pxav3_reset,
> - .set_uhs_signaling = pxav3_set_uhs_signaling,
> + .set_clock = sdhci_set_clock,
> + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = pxav3_reset,
> + .set_uhs_signaling = pxav3_set_uhs_signaling,
IMHO, this is not an improvement, previous style is fine and I saw
such style in kernel here and there
> };
>
> static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
> - .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
> + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
> | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
> | SDHCI_QUIRK_32BIT_ADMA_SIZE
> | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> - .ops = &pxav3_sdhci_ops,
> + .ops = &pxav3_sdhci_ops,
ditto
> };
>
> #ifdef CONFIG_OF
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
