In-Reply-To: <[EMAIL PROTECTED]>

On Thu, 08 Sep 2005 at 15:31:44 -0400, Lee Revell wrote:

> Wait, that sounds like the modem, not the AC97 audio codec.
>
> You might be able to get the modem to work with the (proprietary)
> slmodem software modem, or something.  I wouldn't count on it though.
> 
> Does your sound work?


 Well I'll be...

 I'd assumed from the (confusing) messages that the sound card was
not working, but it seems fine.  Shouldn't the error messages from
atiixp-modem be prefixed with that name instead of "atiixp"?

Untested patch follows.

Signed-off-by: Chuck Ebbert <[EMAIL PROTECTED]>

 sound/pci/atiixp_modem.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

--- 2.6.13a.orig/sound/pci/atiixp_modem.c
+++ 2.6.13a/sound/pci/atiixp_modem.c
@@ -405,7 +405,7 @@ static int snd_atiixp_acquire_codec(atii
 
        while (atiixp_read(chip, PHYS_OUT_ADDR) & ATI_REG_PHYS_OUT_ADDR_EN) {
                if (! timeout--) {
-                       snd_printk(KERN_WARNING "atiixp: codec acquire 
timeout\n");
+                       snd_printk(KERN_WARNING "atiixp-modem: codec acquire 
timeout\n");
                        return -EBUSY;
                }
                udelay(1);
@@ -436,7 +436,7 @@ static unsigned short snd_atiixp_codec_r
        } while (--timeout);
        /* time out may happen during reset */
        if (reg < 0x7c)
-               snd_printk(KERN_WARNING "atiixp: codec read timeout (reg 
%x)\n", reg);
+               snd_printk(KERN_WARNING "atiixp-modem: codec read timeout (reg 
%x)\n", reg);
        return 0xffff;
 }
 
@@ -498,7 +498,7 @@ static int snd_atiixp_aclink_reset(atiix
                do_delay();
                atiixp_update(chip, CMD, ATI_REG_CMD_AC_RESET, 
ATI_REG_CMD_AC_RESET);
                if (--timeout) {
-                       snd_printk(KERN_ERR "atiixp: codec reset timeout\n");
+                       snd_printk(KERN_ERR "atiixp-modem: codec reset 
timeout\n");
                        break;
                }
        }
@@ -552,7 +552,7 @@ static int snd_atiixp_codec_detect(atiix
        atiixp_write(chip, IER, 0); /* disable irqs */
 
        if ((chip->codec_not_ready_bits & ALL_CODEC_NOT_READY) == 
ALL_CODEC_NOT_READY) {
-               snd_printk(KERN_ERR "atiixp: no codec detected!\n");
+               snd_printk(KERN_ERR "atiixp-modem: no codec detected!\n");
                return -ENXIO;
        }
        return 0;
@@ -635,7 +635,7 @@ static void snd_atiixp_xrun_dma(atiixp_t
 {
        if (! dma->substream || ! dma->running)
                return;
-       snd_printdd("atiixp: XRUN detected (DMA %d)\n", dma->ops->type);
+       snd_printdd("atiixp-modem: XRUN detected (DMA %d)\n", dma->ops->type);
        snd_pcm_stop(dma->substream, SNDRV_PCM_STATE_XRUN);
 }
 
@@ -1081,14 +1081,14 @@ static int __devinit snd_atiixp_mixer_ne
                ac97.scaps = AC97_SCAP_SKIP_AUDIO;
                if ((err = snd_ac97_mixer(pbus, &ac97, &chip->ac97[i])) < 0) {
                        chip->ac97[i] = NULL; /* to be sure */
-                       snd_printdd("atiixp: codec %d not available for 
modem\n", i);
+                       snd_printdd("atiixp-modem: codec %d not available for 
modem\n", i);
                        continue;
                }
                codec_count++;
        }
 
        if (! codec_count) {
-               snd_printk(KERN_ERR "atiixp: no codec available\n");
+               snd_printk(KERN_ERR "atiixp-modem: no codec available\n");
                return -ENODEV;
        }
 
@@ -1159,7 +1159,7 @@ static void __devinit snd_atiixp_proc_in
 {
        snd_info_entry_t *entry;
 
-       if (! snd_card_proc_new(chip->card, "atiixp", &entry))
+       if (! snd_card_proc_new(chip->card, "atiixp-modem", &entry))
                snd_info_set_text_ops(entry, chip, 1024, snd_atiixp_proc_read);
 }
 
__
Chuck
Subliminal URL: www.sluggy.com/daily.php?date=050905
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to