On at91sam9x5ek/at91sam9m10g45ek/sama5d3xek boards, we use the parallel
connection for ov2640. So we must set the hsync/vsync property (1 means
active high).
Otherwise, the connection would be seen as BT.656 or BT.1120.
Signed-off-by: Josh Wu <josh...@atmel.com>
---
arch/arm/boot/dts/at91sam9m10g45ek.dts | 2 ++
arch/arm/boot/dts/at91sam9x5ek.dtsi | 2 ++
arch/arm/boot/dts/sama5d3xmb.dtsi | 2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts
b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index d1ae60a..9d16ef8 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -198,6 +198,8 @@
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi
b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index d237c46..479f200 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -66,6 +66,8 @@
isi_0: endpoint@0 {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi
b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 83bee7a..8901042 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -87,6 +87,8 @@
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
