The enable bit indexes for DCDC4 and DCDC5 regulators are off by 1. We haven't run into any problems with this since either the regulators aren't defined in the DT and aren't used, or all the DCDC regulators have the "always-on" property set, as they are almost always used for system critical loads.
Signed-off-by: Chen-Yu Tsai <[email protected]> --- drivers/regulator/axp20x-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 01bf3476a791..a9567af7cec0 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -192,9 +192,9 @@ static const struct regulator_desc axp22x_regulators[] = { AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20, AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20, - AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), + AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(4)), AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, - AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(4)), + AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)), /* secondary switchable output of DCDC1 */ AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100, AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)), -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
