On 10/14/2015 07:46 PM, Kapil Hali wrote:
> Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
> Northstar Plus CPU to the 32-bit ARM CPU device tree binding
> documentation file and create a new binding documentation for
> Northstar Plus CPU pen-release mechanism.
>
> Signed-off-by: Kapil Hali <kap...@broadcom.com>
> ---
> .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 36
> ++++++++++++++++++++++
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> 2 files changed, 37 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
>
> diff --git
> a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
> b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
> new file mode 100644
> index 0000000..8506da7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
> @@ -0,0 +1,36 @@
> +Broadcom Northstar Plus SoC CPU Enable Method
> +---------------------------------------------
> +This binding defines the enable method used for starting secondary
> +CPUs in the following Broadcom SoCs:
> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
> +
> +The enable method is specified by defining the following required
> +properties in the "cpus" device tree node:
> + - enable-method = "brcm,bcm-nsp-smp";
> + - secondary-boot-reg = <...>;
> +
> +The secondary-boot-reg property is a u32 value that specifies the
> +physical address of the register used to request the ROM holding pen
> +code release a secondary CPU.
> +
> +Example:
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "brcm,bcm-nsp-smp";
> + secondary-boot-reg = <0xffff042c>;
Isn't this some offset in a SRAM? If this is a SRAM it should be handled
like it is done in some other SoC code.
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + next-level-cache = <&L2>;
> + reg = <0>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + next-level-cache = <&L2>;
> + reg = <1>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt
> b/Documentation/devicetree/bindings/arm/cpus.txt
> index 91e6e5c..1172d9b 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.txt
> +++ b/Documentation/devicetree/bindings/arm/cpus.txt
> @@ -190,6 +190,7 @@ nodes to be present and contain the properties described
> below.
> "allwinner,sun6i-a31"
> "allwinner,sun8i-a23"
> "arm,psci"
> + "brcm,bcm-nsp-smp"
> "brcm,brahma-b15"
> "marvell,armada-375-smp"
> "marvell,armada-380-smp"
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
