Use spi->cs_gpio directly to remove the following build warning: drivers/spi/spi-davinci.c:219:6: warning: 'gpio' may be used uninitialized in this function
Signed-off-by: Luis de Bethencourt <[email protected]> Suggested-by: Geert Uytterhoeven <[email protected]> --- Hi, The warning and suggestion can be seen here: https://lkml.org/lkml/2015/10/15/909 Thanks, Luis drivers/spi/spi-davinci.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index a85d863..7d3af3e 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -215,18 +215,10 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) struct davinci_spi_config *spicfg = spi->controller_data; u8 chip_sel = spi->chip_select; u16 spidat1 = CS_DEFAULT; - bool gpio_chipsel = false; - int gpio; dspi = spi_master_get_devdata(spi->master); pdata = &dspi->pdata; - if (spi->cs_gpio >= 0) { - /* SPI core parse and update master->cs_gpio */ - gpio_chipsel = true; - gpio = spi->cs_gpio; - } - /* program delay transfers if tx_delay is non zero */ if (spicfg->wdelay) spidat1 |= SPIDAT1_WDEL; @@ -235,11 +227,12 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) * Board specific chip select logic decides the polarity and cs * line for the controller */ - if (gpio_chipsel) { + if (spi->cs_gpio >= 0) { if (value == BITBANG_CS_ACTIVE) - gpio_set_value(gpio, spi->mode & SPI_CS_HIGH); + gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH); else - gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH)); + gpio_set_value(spi->cs_gpio, + !(spi->mode & SPI_CS_HIGH)); } else { if (value == BITBANG_CS_ACTIVE) { spidat1 |= SPIDAT1_CSHOLD_MASK; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
