On 2024/3/11 17:26, Tian, Kevin wrote:
From: Liu, Yi L <[email protected]>
Sent: Sunday, March 10, 2024 9:06 PM
On 2024/1/16 01:19, Jason Gunthorpe wrote:
On Sun, Nov 26, 2023 at 10:34:21PM -0800, Yi Liu wrote:
+int iommu_replace_device_pasid(struct iommu_domain *domain,
+ struct device *dev, ioasid_t pasid)
+{
+ struct iommu_group *group = dev->iommu_group;
+ struct iommu_domain *old_domain;
+ int ret;
+
+ if (!domain)
+ return -EINVAL;
+
+ if (!group)
+ return -ENODEV;
+
+ mutex_lock(&group->mutex);
+ __iommu_remove_group_pasid(group, pasid);
It is not replace if you do remove first.
Replace must just call set_dev_pasid and nothing much else..
Seems uneasy to do it so far. The VT-d driver needs to get the old domain
first in order to do replacement. However, VT-d driver does not track the
attached domains of pasids. It gets domain of a pasid
by iommu_get_domain_for_dev_pasid(). Like
intel_iommu_remove_dev_pasid)
in link [1]. While the iommu layer exchanges the domain in the
group->pasid_array before calling into VT-d driver. So when calling into
VT-d driver, the domain got by iommu_get_domain_for_dev_pasid() is
already
the new domain. To solve it, we may need to let VT-d driver have its
own tracking on the domains. How about your thoughts? @Jason, @Kevin,
@Baoplu?
[1]
https://github.com/torvalds/linux/blob/master/drivers/iommu/intel/iommu
.c#L4621C19-L4621C20
Jason's point was that the core helper should directly call set_dev_pasid
and underlying iommu driver decides whether atomic replacement
can be implemented inside the callback. If you first remove in the core
then one can never implement a replace semantics.
yeah, I got Jason's point. I'm raising an open to make the set_dev_pasid
callback to handle domain replacement. The existing intel iommu driver
does not track attached domains for pasid. But it's needed to know the
attached domain of a pasid and find the dev_pasid under the domain, hence
be able to clean up the old attachment and do the new attachment. Existing
code cannot work as I mentioned above. The group->pasid_xarray is updated
before calling set_dev_pasid callback. This means the underlying iommu
driver cannot get the old domain in the set_dev_pasid callback by the
iommu_get_domain_for_dev_pasid() helper.
As above, I'm considering the possibility to track attached domains for
pasid by an xarray in the struct device_domain_info. Hence, intel iommu
driver could store/retrieve attached domain for pasids. If it's
replacement, the set_dev_pasid callback could find the attached domain and
the dev_pasid instance in the domain. Then be able to do detach and clean
up the tracking structures (e.g. dev_pasid).
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index e58263dcfadd..03a847a406e1 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4398,6 +4398,7 @@ static struct iommu_device
*intel_iommu_probe_device(struct device *dev)
info->dev = dev;
info->iommu = iommu;
+ xa_init(&info->pasid_array);
if (dev_is_pci(dev)) {
if (ecap_dev_iotlb_support(iommu->ecap) &&
pci_ats_supported(pdev) &&
@@ -4464,6 +4465,7 @@ static void intel_iommu_release_device(struct device
*dev)
mutex_unlock(&iommu->iopf_lock);
dmar_remove_one_dev_info(dev);
intel_pasid_free_table(dev);
+ WARN_ON(!xa_empty(&info->pasid_array));
intel_iommu_debugfs_remove_dev(info);
kfree(info);
set_dma_ops(dev, NULL);
@@ -4707,7 +4709,13 @@ static int intel_iommu_iotlb_sync_map(struct
iommu_domain *domain,
return 0;
}
-static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid)
+/*
+ * Clear the pasid table entries so that all DMA requests with specific
+ * PASID from the device are blocked. If the page table has been set, clean
+ * up the data structures.
+ */
+static void device_pasid_block_translation(struct device *dev, ioasid_t pasid,
+ bool remove)
{
struct device_domain_info *info = dev_iommu_priv_get(dev);
struct dev_pasid_info *curr, *dev_pasid = NULL;
@@ -4716,9 +4724,11 @@ static void intel_iommu_remove_dev_pasid(struct
device *dev, ioasid_t pasid)
struct iommu_domain *domain;
unsigned long flags;
- domain = iommu_get_domain_for_dev_pasid(dev, pasid, 0);
- if (WARN_ON_ONCE(!domain))
+ domain = xa_erase(&info->pasid_array, pasid);
+ if (!domain) {
+ WARN_ON_ONCE(remove);
return;
+ }
/*
* The SVA implementation needs to handle its own stuffs like the mm
@@ -4753,6 +4763,11 @@ static void intel_iommu_remove_dev_pasid(struct
device *dev, ioasid_t pasid)
intel_drain_pasid_prq(dev, pasid);
}
+static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid)
+{
+ device_pasid_block_translation(dev, pasid, true);
+}
+
static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
struct device *dev, ioasid_t pasid)
{
@@ -4772,6 +4787,9 @@ static int intel_iommu_set_dev_pasid(struct
iommu_domain *domain,
if (context_copied(iommu, info->bus, info->devfn))
return -EBUSY;
+ /* Try to block translation if it already has */
+ device_pasid_block_translation(dev, pasid, false);
+
ret = prepare_domain_attach_device(domain, dev);
if (ret)
return ret;
@@ -4801,6 +4819,8 @@ static int intel_iommu_set_dev_pasid(struct
iommu_domain *domain,
list_add(&dev_pasid->link_domain, &dmar_domain->dev_pasids);
spin_unlock_irqrestore(&dmar_domain->lock, flags);
+ xa_store(&info->pasid_array, pasid, dmar_domain, GFP_KERNEL);
+
if (domain->type & __IOMMU_DOMAIN_PAGING)
intel_iommu_debugfs_create_dev_pasid(dev_pasid);
diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h
index 94e2ecc3c73f..a466555f61fe 100644
--- a/drivers/iommu/intel/iommu.h
+++ b/drivers/iommu/intel/iommu.h
@@ -767,6 +767,7 @@ struct device_domain_info {
#ifdef CONFIG_INTEL_IOMMU_DEBUGFS
struct dentry *debugfs_dentry; /* pointer to device directory dentry */
#endif
+ struct xarray pasid_array; /* Attached domains per PASID */
};
struct dev_pasid_info {
--
Regards,
Yi Liu
