Hi Aldo,
I'm still figuring out RH6.0 on my laptop, but... Run 'netcfg'
(as root) and make sure the "Names," "Hosts," and "Interfaces" are
correct for your laptop (it sounds like they mostly are). The problem
sounds like you need to make sure your default gateway (route) is set
under the "Routing" button.
If worse comes to worst, your gateway is set in /etc/sysconfig/network,
and your ip address is set in /etc/sysconfig/network-scripts/ifcfg-eth0,
so you can edit them manually, if necessary.
Hope this helps!
Scott
You wrote:
>
>Hello linux-laptop,
>
> Hi!
> i have problem to set the default route over redhat 6.0
> the network adapter is detected and the ping command is ok on the
> local address.
> when i put a ftp command to another local machine....the response is
> "no route to another host"
> i see the part of configuration for the netX but i don't understod
> what/were is the windows settings, the other ip an names of remote
> machine is set.
> the name of local machine is set,and i need the help !!!!!!1
> thanks in advance to all help.
>
> bye bye
>
>Best regards,
> Aldo mailto:[EMAIL PROTECTED]
>
>
>mercoled� 23 settembre 1998
>
> http://www.ampellio.com/baravalle
> http://members.xoom.it/baravalle/INDEX.HTM
>
