I have the same model: Sony Vaio PCG-F250 and the same problem:
the second time I run "apm -s", the machine freezes, with the
screen still on.
Here is the info you requested. Hope this helps.
Michael
===
Script started on Mon Aug 16 12:08:40 1999
[root@cecil /root]# uname -a
Linux cecil.bonzo.org 2.2.5-15 #1 Mon Apr 19 23:00:46 EDT 1999 i686 unknown
[root@cecil /root]# lspci -vvx
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (AGP
disabled) (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR+
Latency: 64 set
Region 0: Memory at <unassigned> (32-bit, prefetchable)
00: 86 80 92 71 06 01 00 a2 03 00 00 06 00 40 00 00
10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 set
00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at fcf0
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: f1 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 0
Region 4: I/O ports at fcc0
00: 86 80 12 71 01 00 80 02 01 00 03 0c 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: c1 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 04 00 00
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00: 86 80 13 71 03 00 80 02 02 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:08.0 VGA compatible controller: Neomagic Corporation [MagicGraph 256AV] (rev 20)
Subsystem: Unknown device 104d:8040
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fd000000 (32-bit, prefetchable)
Region 1: Memory at fe800000 (32-bit, non-prefetchable)
Region 2: Memory at fed00000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: c8 10 05 00 03 00 90 02 20 00 00 03 00 80 80 00
10: 08 00 00 fd 00 00 80 fe 00 00 d0 fe 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 4d 10 40 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 10 ff
00:08.1 Multimedia audio controller: Neomagic Corporation: Unknown device 8005 (rev 20)
Subsystem: Unknown device 104d:8041
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 0: Memory at fe000000 (32-bit, prefetchable)
Region 1: Memory at fec00000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: c8 10 05 80 02 00 90 02 20 00 01 04 00 00 80 00
10: 08 00 00 fe 00 00 c0 fe 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 4d 10 41 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 02 00 00
00:09.0 FireWire (IEEE 1394): Sony Corporation: Unknown device 8009 (rev 01)
Subsystem: Unknown device 104d:8043
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fe7ffc00 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 4d 10 09 80 02 00 10 02 01 00 00 0c 08 40 00 00
10: 00 fc 7f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 4d 10 43 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 ff 01 00 00
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5C478 (rev 80)
Subsystem: Unknown device 1180:0478
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168 set
Interrupt: pin A routed to IRQ 0
Region 0: Memory at <ignored> (32-bit, non-prefetchable)
Bus: primary=00, secondary=20, subordinate=22, sec-latency=176
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0007
00: 80 11 78 04 07 00 10 02 80 00 07 06 00 a8 82 00
10: 00 00 00 68 dc 00 00 02 00 20 22 b0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 80 04
40: 80 11 78 04 07 00 10 02 80 00 07 06 00 a8 82 00
50: 00 00 00 68 dc 00 00 02 00 20 22 b0 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 80 04
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5C478 (rev 80)
Subsystem: Unknown device 1180:0478
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168 set
Interrupt: pin B routed to IRQ 0
Region 0: Memory at <ignored> (32-bit, non-prefetchable)
Bus: primary=00, secondary=23, subordinate=25, sec-latency=176
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0007
00: 80 11 78 04 07 00 10 02 80 00 07 06 00 a8 82 00
10: 00 10 00 68 dc 00 00 02 00 23 25 b0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 02 80 04
40: 80 11 78 04 07 00 10 02 80 00 07 06 00 a8 82 00
50: 00 10 00 68 dc 00 00 02 00 23 25 b0 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 ff 02 80 04
00:0b.0 Communication controller: Rockwell International: Unknown device 2005 (rev 01)
Subsystem: Unknown device 104d:8044
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fe7e0000 (32-bit, non-prefetchable)
Region 1: I/O ports at fce8
Capabilities: [40] Power Management version 2
Flags: PMEClk- AuxPwr+ DSI+ D1- D2- PME+
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00: 7a 12 05 20 03 00 90 02 01 00 80 07 00 40 00 00
10: 00 00 7e fe e9 fc 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 4d 10 44 80
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
[root@cecil /root]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (no AGP) (rev 3).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0x0 [0x8].
Bus 0, device 7, function 0:
Bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xfcf0 [0xfcf1].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xfcc0 [0xfcc1].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 8, function 0:
VGA compatible controller: Neomagic Unknown device (rev 32).
Vendor id=10c8. Device id=5.
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable.
Latency=128. Min Gnt=16.Max Lat=255.
Prefetchable 32 bit memory at 0xfd000000 [0xfd000008].
Non-prefetchable 32 bit memory at 0xfe800000 [0xfe800000].
Non-prefetchable 32 bit memory at 0xfed00000 [0xfed00000].
Bus 0, device 8, function 1:
Multimedia audio controller: Neomagic Unknown device (rev 32).
Vendor id=10c8. Device id=8005.
Medium devsel. Fast back-to-back capable. IRQ 9.
Prefetchable 32 bit memory at 0xfe000000 [0xfe000008].
Non-prefetchable 32 bit memory at 0xfec00000 [0xfec00000].
Bus 0, device 9, function 0:
FireWire (IEEE 1394): Unknown vendor Unknown device (rev 1).
Vendor id=104d. Device id=8009.
Medium devsel. Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfe7ffc00 [0xfe7ffc00].
Bus 0, device 10, function 0:
CardBus bridge: Ricoh Unknown device (rev 128).
Vendor id=1180. Device id=478.
Medium devsel. Master Capable. Latency=168. Min Gnt=128.Max Lat=4.
Bus 0, device 10, function 1:
CardBus bridge: Ricoh Unknown device (rev 128).
Vendor id=1180. Device id=478.
Medium devsel. Master Capable. Latency=168. Min Gnt=128.Max Lat=4.
Bus 0, device 11, function 0:
Communication controller: Unknown vendor Unknown device (rev 1).
Vendor id=127a. Device id=2005.
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfe7e0000 [0xfe7e0000].
I/O at 0xfce8 [0xfce9].
[root@cecil /root]# dmesg
Linux version 2.2.5-15 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 23:00:46 EDT 1999
Detected 364741352 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 363.72 BogoMIPS
Memory: 30632k/32704k available (996k kernel code, 412k reserved, 604k data, 60k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Celeron (Mendocino) stepping 0a
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfd9e4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:3a
PCI: Enabling memory for device 00:48
PCI: Enabling I/O for device 00:58
PCI: Enabling memory for device 00:58
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MHF2043AT, ATA DISK drive
hdc: CD-224E, ATAPI CDROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU MHF2043AT, 4126MB w/0kB Cache, CHS=559/240/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: using high-speed MMX checksum routine
pII_mmx : 887.349 MB/sec
p5_mmx : 859.917 MB/sec
8regs : 628.650 MB/sec
32regs : 451.866 MB/sec
using fastest function: pII_mmx (887.349 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3 hda4
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 36k swap-space (priority -1)
Linux PCMCIA Card Services 3.0.9
kernel build: 2.2.5-15 #1 Mon Apr 19 23:00:46 EDT 1999
options: [pci] [cardbus] [apm]
Intel PCIC probe:
Ricoh RL5C478 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets
host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus
32/34]
host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus
35/37]
ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x140-0x147 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 Compatible: port 0x300, irq 3, hw_addr 00:E0:98:06:64:3D
cat uses obsolete /proc/pci interface
[root@cecil /root]# exit
exit
Script done on Mon Aug 16 12:09:30 1999
