Hi, sorry I still have problems:
1) I can't find netowrk.opt file in /etc/pcmcia
Can I create one? what's the format of the file?
2) I try to use man, but I can't find information
about netcfg. Could you give me some more ideas?
Thank you.
Lee
On Fri, 12 May 2000, Denny Lee wrote:
> Hello,
> I just finished fighting the Toshiba 2675DVD. First of all, after you are done
>installing RedHAt, you may want to compile the new package of pcmcia driver found at
>http://pcmcia.sourceforge.org/. When you are done installing the package, go to
>/etc/pcmcia and edit the netowrk.opt file. Put in all of the network info. When you
>are done with that, reboot the machine (this may not be necessary but I did it any
>way). After you are back into Linux, use netcfg to configure the network info.
>When that is done, type
> /etc/rc.d/init.d/pcmcia restart
> and
> /etc/rc.d.init.d/network restart
>
> That should get you going on the network card.
>
> As for the screen. I am not sure what type of screen you have. On the 2675
>although the spec said that the screen is only 800x640, I had to set the LCD to
>1024x768 in order for it to work properly. I picked the LCD 1024x768 instead of the
>"Custom" option.
>
> Good luck.
> --
>
> On Fri, 12 May 2000 10:27:09 H. Lee wrote:
> >
> >Hi, I'm trying to install RedHat 6.1 on my Toshiba Satellite
> >2655XDVD (with Linksys EtherFast 10/100 PC Card). My questions
> >are:
> >
> >1) During installation, I never get chance to config the network
> > card. Is this normal? What driver should I use?
> >2) During monitor setup, I guess I need to choose "Custom",
> > but what's the valid horizontal sync and vertical sync?
> > I can find one of them in the manual.
> >
> >Any advice is highly appreciated.
> >
> >Thanks in advance,
> >
> >Lee
> >
> >
>
>
> --== Sent via Deja.com http://www.deja.com/ ==--
> Before you buy.
>
