"Adrian D Jensen" <[EMAIL PROTECTED]> schrieb am 15.05.00:
> [EMAIL PROTECTED] on 05/14/2000 02:40:01 AM
> >If I insert a SanDisk (ATA/IDE) with 16MB Capacity
> >it would recognised well (two high sounds).
> >
> >If I insert a SanDisk (ATA/IDE) with 96MB Capacity
> >at the console the following message appears:
> >
> > cs: socket 0 timed out during reset
>
> >After a
> >
> > cardctl reset
> >
> >as root I will get a high and a low Sound.
> >
> What other (if any) messages are there in the message logs? A low sound means
> something failed, maybe it says what in the log. The only thing I can find on
> this sort of thing is a timing problem on another manufacter's card. The fix was
> to increase the reset delay time with a unreset_delay= in the options file. Then
> again, no one mentioned having a card this big, so maybe it's a size problem.
I've tried unreset_delay=1000, but the only change is the timed out message
appears later?!
The low beep occurs only after a cardctl reset. In the "normal way" after
insert the card only the timed out message occur on the active console.
R�diger
_______________________________________________________________________
1.000.000 DM gewinnen - kostenlos tippen - http://millionenklick.web.de
[EMAIL PROTECTED], 8MB Speicher, Verschluesselung - http://freemail.web.de
