Hi Pavel, On Thu, Nov 20, 2014 at 02:17:13PM +0100, Pavel Machek wrote: > > Add attributes neccessary for LED flashes to > devicetree/bindings/leds/common.txt . > > This will allow me to add device tree support for adp1653 i2c flash > LED driver, and allow Jacek Anaszewski to add support for more LED > drivers.. > > Signed-off-by: Pavel Machek <[email protected]> > > diff --git a/Documentation/devicetree/bindings/leds/common.txt > b/Documentation/devicetree/bindings/leds/common.txt > index 2d88816..e9acbbc 100644 > --- a/Documentation/devicetree/bindings/leds/common.txt > +++ b/Documentation/devicetree/bindings/leds/common.txt > @@ -14,6 +14,15 @@ Optional properties for child nodes: > "ide-disk" - LED indicates disk activity > "timer" - LED flashes at a fixed, configurable rate > > +- max-microamp : maximum intensity in microamperes of the LED > + (torch LED for flash devices) > +- flash-max-microamp : maximum intensity in microamperes of the > + flash LED; it is mandatory if the LED should > + support the flash mode > +- flash-timeout-microsec : timeout in microseconds after which the flash > + LED is turned off
It might be good to add a note that these may be arrays, depending on the device. -- Regards, Sakari Ailus e-mail: [email protected] XMPP: [email protected] -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
