Hi Sakari,
On 12/04/2014 12:40 PM, Jacek Anaszewski wrote:
On 12/04/2014 11:07 AM, Sakari Ailus wrote:
Hi Jacek,
On Wed, Dec 03, 2014 at 05:06:41PM +0100, Jacek Anaszewski wrote:
This patch adds device tree binding documentation for
the flash cell of the Maxim max77693 multifunctional device.
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Acked-by: Kyungmin Park <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Chanwoo Choi <[email protected]>
Cc: Bryan Wu <[email protected]>
Cc: Richard Purdie <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: <[email protected]>
---
Documentation/devicetree/bindings/mfd/max77693.txt | 89
++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt
b/Documentation/devicetree/bindings/mfd/max77693.txt
index 01e9f30..25a6e78 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -41,7 +41,66 @@ Optional properties:
To get more informations, please refer to documentaion.
[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
+- led : the LED submodule device node
+
+There are two led outputs available - fled1 and fled2. Each of them can
+control a separate led or they can be connected together to double
+the maximum current for a single connected led. One led is represented
+by one child node.
+
+Required properties:
+- compatible : Must be "maxim,max77693-led".
+
+Optional properties:
+- maxim,fleds : Array of current outputs in order: fled1, fled2.
+ Note: both current outputs can be connected to a single led
+ Possible values:
+ MAX77693_LED_FLED_UNUSED - the output is left disconnected,
+ MAX77693_LED_FLED_USED - a diode is connected to the output.
As you have a LED sub-nodes for each LED already, isn't this redundant?
Well, it seems so :)
I agreed here recklessly. This property allows to describe the
situation when one LED is connected to both outputs. Single sub-node
can describe two type of designs: one LED connected to a single
output or one LED connected to both outputs. Therefore additional
property is needed to assess what is the actual case.
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
