Add a property for defining the device outputs the LED represented by the DT child node is connected to.
Signed-off-by: Jacek Anaszewski <[email protected]> Acked-by: Kyungmin Park <[email protected]> Cc: Bryan Wu <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Kumar Gala <[email protected]> --- Documentation/devicetree/bindings/leds/common.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index a2c3f7a..29295bf 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -1,6 +1,10 @@ Common leds properties. Optional properties for child nodes: +- led-sources : Array of bits signifying the LED current regulator outputs the + LED represented by the child node is connected to (1 - the LED + is connected to the output, 0 - the LED isn't connected to the + output). - label : The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). @@ -33,6 +37,7 @@ system-status { camera-flash { label = "Flash"; + led-sources = <1 0>; max-microamp = <50000>; flash-max-microamp = <320000>; flash-timeout-us = <500000>; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
