Vasant Hegde <[email protected]> writes: > From: Anshuman Khandual <[email protected]> > > This patch implements LED driver for PowerNV platform using the existing > generic LED class framework. It registers classdev structures for all > individual LEDs detected on the system through LED specific device tree > nodes. Device tree nodes specify what all kind of LEDs present on the > same location code. It registers LED classdev structure for each of them. > > The platform level implementation of LED get and set state has been > achieved through OPAL calls. These calls are made available for the > driver by exporting from architecture specific codes. > > As per the LED class framework, the 'brightness_set' function should not > sleep. Hence these functions have been implemented through global work > queue tasks which might sleep on OPAL async call completion. > > All the system LEDs can be found in the same regular path /sys/class/leds/. > There are two different kind of LEDs present for the same location code, > one being the identify indicator and other one being the fault indicator. > We don't use LED colors. Hence our LEDs have names in this format. > > <location_code>:<IDENTIFY|FAULT> > > Any positive brightness value would turn on the LED and a zero value > would turn off the LED. The driver will return LED_FULL (255) for any > turned on LED and LED_OFF for any turned off LED. > > Signed-off-by: Anshuman Khandual <[email protected]> > Signed-off-by: Vasant Hegde <[email protected]>
Acked-by: Stewart Smith <[email protected]> Tested-by: Stewart Smith <[email protected]> (well, it boots, interacts with firmware. I didn't go and look at the LEDs themselves). -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
