On Mon, Jun 15, 2015 at 3:11 AM, Jacek Anaszewski
<[email protected]> wrote:
> On 06/15/2015 10:56 AM, Matt Ranostay wrote:
>>
>> On Mon, Jun 15, 2015 at 1:15 AM, Jacek Anaszewski
>> <[email protected]> wrote:
>>>
>>> Hi Matt,
>>>
>>>
>>> On 06/13/2015 06:17 AM, Matt Ranostay wrote:
>>>>
>>>>
>>>> Several cap11xx variants have LEDs that be can be controlled, this
>>>> patchset implements this functionality.
>>>>
>>>> Signed-off-by: Matt Ranostay <[email protected]>
>>>> ---
>>>> drivers/input/keyboard/cap11xx.c | 121
>>>> ++++++++++++++++++++++++++++++++++++++-
>>>> 1 file changed, 118 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/input/keyboard/cap11xx.c
>>>> b/drivers/input/keyboard/cap11xx.c
>>>> index f07461a..994154c 100644
>>>> --- a/drivers/input/keyboard/cap11xx.c
>>>> +++ b/drivers/input/keyboard/cap11xx.c
>>>> @@ -12,6 +12,7 @@
>>>> #include <linux/module.h>
>>>> #include <linux/interrupt.h>
>>>> #include <linux/input.h>
>>>> +#include <linux/leds.h>
>>>> #include <linux/of_irq.h>
>>>> #include <linux/regmap.h>
>>>> #include <linux/i2c.h>
>>>> @@ -47,6 +48,20 @@
>>>> #define CAP11XX_REG_CONFIG2 0x44
>>>> #define CAP11XX_REG_CONFIG2_ALT_POL BIT(6)
>>>> #define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
>>>> +#define CAP11XX_REG_LED_POLARITY 0x73
>>>> +#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74
>>>> +
>>>> +#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90
>>>> +#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91
>>>> +#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92
>>>> +#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93
>>>> +
>>>> +#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f)
>>>> +#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0)
>>>> +#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0)
>>>> +#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4)
>>>> +#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15)
>>>> +
>>>> #define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X))
>>>> #define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9
>>>> #define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba
>>>> @@ -56,10 +71,24 @@
>>>>
>>>> #define CAP11XX_MANUFACTURER_ID 0x5d
>>>>
>>>> +#ifdef CONFIG_LEDS_CLASS
>>>> +struct cap11xx_led {
>>>> + struct cap11xx_priv *priv;
>>>> + struct led_classdev cdev;
>>>> + struct work_struct work;
>>>> + u32 reg;
>>>> + enum led_brightness new_brightness;
>>>> +};
>>>> +#endif
>>>> +
>>>> struct cap11xx_priv {
>>>> struct regmap *regmap;
>>>> struct input_dev *idev;
>>>>
>>>> +#ifdef CONFIG_LEDS_CLASS
>>>> + struct cap11xx_led *leds;
>>>> + int num_leds;
>>>> +#endif
>>>> /* config */
>>>> u32 keycodes[];
>>>> };
>>>> @@ -67,6 +96,7 @@ struct cap11xx_priv {
>>>> struct cap11xx_hw_model {
>>>> u8 product_id;
>>>> unsigned int num_channels;
>>>> + unsigned int num_leds;
>>>> };
>>>>
>>>> enum {
>>>> @@ -76,9 +106,9 @@ enum {
>>>> };
>>>>
>>>> static const struct cap11xx_hw_model cap11xx_devices[] = {
>>>> - [CAP1106] = { .product_id = 0x55, .num_channels = 6 },
>>>> - [CAP1126] = { .product_id = 0x53, .num_channels = 6 },
>>>> - [CAP1188] = { .product_id = 0x50, .num_channels = 8 },
>>>> + [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds =
>>>> 0
>>>> },
>>>> + [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds =
>>>> 2
>>>> },
>>>> + [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds =
>>>> 8
>>>> },
>>>> };
>>>>
>>>> static const struct reg_default cap11xx_reg_defaults[] = {
>>>> @@ -111,6 +141,7 @@ static const struct reg_default
>>>> cap11xx_reg_defaults[]
>>>> = {
>>>> { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 },
>>>> { CAP11XX_REG_STANDBY_THRESH, 0x40 },
>>>> { CAP11XX_REG_CONFIG2, 0x40 },
>>>> + { CAP11XX_REG_LED_POLARITY, 0x00 },
>>>> { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 },
>>>> { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 },
>>>> };
>>>> @@ -196,6 +227,84 @@ static void cap11xx_input_close(struct input_dev
>>>> *idev)
>>>> cap11xx_set_sleep(priv, true);
>>>> }
>>>>
>>>> +#ifdef CONFIG_LEDS_CLASS
>>>> +static void cap11xx_led_work(struct work_struct *work)
>>>> +{
>>>> + struct cap11xx_led *led = container_of(work, struct cap11xx_led,
>>>> work);
>>>> + struct cap11xx_priv *priv = led->priv;
>>>> + int value = led->new_brightness;
>>>> +
>>>> + regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
>>>> + BIT(led->reg), !!value ? BIT(led->reg) :
>>>> 0);
>>>
>>>
>>>
>>> You should set here the brightness value, not only turn the led on/off.
>>>
>>
>> The issue is that the setting is across _ALL_ leds for brightness. But
>> on/off state can clearly vary
>
>
> OK. The comment describing this would be nice here.
Ok will make this more clear in v4.
Thanks,
Matt
>
>
>>>
>>>> +}
>>>> +
>>>> +static void cap11xx_led_set(struct led_classdev *cdev,
>>>> + enum led_brightness value)
>>>> +{
>>>> + struct cap11xx_led *led = container_of(cdev, struct cap11xx_led,
>>>> cdev);
>>>> +
>>>> + led->new_brightness = value;
>>>> + schedule_work(&led->work);
>>>> +}
>>>> +
>>>> +static int cap11xx_init_leds(struct device *dev, struct cap11xx_priv
>>>> *priv)
>>>> +{
>>>> + struct device_node *node = dev->of_node, *child;
>>>> + struct cap11xx_led *led;
>>>> + int cnt = of_get_child_count(node);
>>>> + u32 reg = 0;
>>>> + int error;
>>>> +
>>>> + if (!priv->num_leds || !cnt)
>>>> + return 0;
>>>> + if (cnt > priv->num_leds)
>>>> + return -EINVAL;
>>>> +
>>>> + led = devm_kcalloc(dev, cnt,
>>>> + sizeof(struct cap11xx_led), GFP_KERNEL);
>>>> + if (!led)
>>>> + return -ENOMEM;
>>>> +
>>>> + priv->leds = led;
>>>> + error = of_property_read_u32(node, "linux,led-brightness",
>>>> ®);
>>>> + if (error || reg > CAP11XX_REG_LED_DUTY_MAX_VALUE)
>>>> + reg = CAP11XX_REG_LED_DUTY_MAX_VALUE;
>>>
>>>
>>>
>>> This property seems to be redundant, as brightness is controlled with
>>> 'brightness' sysfs property.
>>
>>
>> See above comment.
>>>
>>>
>>>> + error = regmap_update_bits(priv->regmap,
>>>> CAP11XX_REG_LED_DUTY_CYCLE_4,
>>>> + CAP11XX_REG_LED_DUTY_MAX_MASK,
>>>> + reg <<
>>>> CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT);
>>>
>>>
>>>
>>> This probably should be called from brightness_set op.
>>
>>
>> Above :)
>>>
>>>
>>>> + if (error)
>>>> + return error;
>>>> +
>>>> + for_each_child_of_node(node, child) {
>>>> + led->cdev.name =
>>>> + of_get_property(child, "label", NULL) ? :
>>>> child->name;
>>>> + led->cdev.default_trigger =
>>>> + of_get_property(child, "linux,default-trigger",
>>>> NULL);
>>>> + led->cdev.flags = 0;
>>>
>>>
>>>
>>> You don't need to clear flags, as the memory is zeroed by kcalloc.
>>>
>>>> + led->cdev.brightness_set = cap11xx_led_set;
>>>> + led->cdev.max_brightness = 1;
>>>
>>>
>>>
>>> You introduced linux,led-brightness DT property and defined its range
>>> to 0-15 (it should be 1-15 btw), but here you allow for brightness to
>>> be max 1.
>>>
>>>> + led->cdev.brightness = LED_OFF;
>>>
>>>
>>>> +
>>>>
>>>> + error = of_property_read_u32(child, "reg", ®);
>>>> + if (error != 0 || reg >= priv->num_leds)
>>>> + continue;
>>>> + led->reg = reg;
>>>> + led->priv = priv;
>>>> +
>>>> + error = devm_led_classdev_register(dev, &led->cdev);
>>>> + if (error < 0)
>>>> + return -EINVAL;
>>>> + INIT_WORK(&led->work, cap11xx_led_work);
>>>> + schedule_work(&led->work);
>>>
>>>
>>>
>>> Work queue should be initialized before registration of the LED class
>>> device.
>>
>> What is the reason for this? Just curious
>
>
> See Daniel's explanation.
>
>
>>>
>>>> + led++;
>>>> + };
>>>> +
>>>> + return 0;
>>>> +}
>>>> +#endif
>>>> +
>>>> static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
>>>> const struct i2c_device_id *id)
>>>> {
>>>> @@ -316,6 +425,12 @@ static int cap11xx_i2c_probe(struct i2c_client
>>>> *i2c_client,
>>>> priv->idev->open = cap11xx_input_open;
>>>> priv->idev->close = cap11xx_input_close;
>>>>
>>>> +#ifdef CONFIG_LEDS_CLASS
>>>> + priv->num_leds = cap->num_leds;
>>>> + error = cap11xx_init_leds(dev, priv);
>>>> + if (error)
>>>> + return error;
>>>> +#endif
>>>> input_set_drvdata(priv->idev, priv);
>>>>
>>>> /*
>>>>
>>>
>>>
>>> --
>>> Best Regards,
>>> Jacek Anaszewski
>>
>>
>
>
> --
> Best Regards,
> Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
