Hi Simon, On 18/06/2015 13:52, Simon Guinot wrote: > This patch adds DT entries for the LEDs found on the Kirkwood-based > LaCie boards 2Big and 5Big Network v2. > > Signed-off-by: Simon Guinot <[email protected]> > ---
Acked-by: Gregory CLEMENT <[email protected]> Thanks, Gregory > arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++ > arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 > +++++++++++++++++++++++++++++++++ > 2 files changed, 140 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts > b/arch/arm/boot/dts/kirkwood-net5big.dts > index 36155b749d9f..3cc5e469df06 100644 > --- a/arch/arm/boot/dts/kirkwood-net5big.dts > +++ b/arch/arm/boot/dts/kirkwood-net5big.dts > @@ -86,6 +86,66 @@ > clock-frequency = <32768>; > }; > }; > + > + netxbig-leds { > + blue-sata2 { > + label = "netxbig:blue:sata2"; > + mode-addr = <5>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 7 > + NETXBIG_LED_SATA 1 > + NETXBIG_LED_TIMER1 3>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + red-sata2 { > + label = "netxbig:red:sata2"; > + mode-addr = <5>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 2 > + NETXBIG_LED_TIMER1 4>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + blue-sata3 { > + label = "netxbig:blue:sata3"; > + mode-addr = <6>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 7 > + NETXBIG_LED_SATA 1 > + NETXBIG_LED_TIMER1 3>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + red-sata3 { > + label = "netxbig:red:sata3"; > + mode-addr = <6>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 2 > + NETXBIG_LED_TIMER1 4>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + blue-sata4 { > + label = "netxbig:blue:sata4"; > + mode-addr = <7>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 7 > + NETXBIG_LED_SATA 1 > + NETXBIG_LED_TIMER1 3>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + red-sata4 { > + label = "netxbig:red:sata4"; > + mode-addr = <7>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 2 > + NETXBIG_LED_TIMER1 4>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + }; > }; > > &mdio { > diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi > b/arch/arm/boot/dts/kirkwood-netxbig.dtsi > index b0cfb7cd30b9..5e7ed1c7e1b2 100644 > --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi > +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi > @@ -13,6 +13,7 @@ > * warranty of any kind, whether express or implied. > */ > > +#include <dt-bindings/leds/leds-netxbig.h> > #include "kirkwood.dtsi" > #include "kirkwood-6281.dtsi" > > @@ -105,6 +106,85 @@ > gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; > }; > }; > + > + netxbig_gpio_ext: netxbig-gpio-ext { > + compatible = "lacie,netxbig-gpio-ext"; > + > + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH > + &gpio1 16 GPIO_ACTIVE_HIGH > + &gpio1 17 GPIO_ACTIVE_HIGH>; > + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH > + &gpio1 13 GPIO_ACTIVE_HIGH > + &gpio1 14 GPIO_ACTIVE_HIGH>; > + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; > + }; > + > + netxbig-leds { > + compatible = "lacie,netxbig-leds"; > + > + gpio-ext = <&netxbig_gpio_ext>; > + > + timers = <NETXBIG_LED_TIMER1 500 500 > + NETXBIG_LED_TIMER2 500 1000>; > + > + blue-power { > + label = "netxbig:blue:power"; > + mode-addr = <0>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 1 > + NETXBIG_LED_TIMER1 3 > + NETXBIG_LED_TIMER2 7>; > + bright-addr = <1>; > + bright-max = <7>; > + }; > + red-power { > + label = "netxbig:red:power"; > + mode-addr = <0>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 2 > + NETXBIG_LED_TIMER1 4>; > + bright-addr = <1>; > + bright-max = <7>; > + }; > + blue-sata0 { > + label = "netxbig:blue:sata0"; > + mode-addr = <3>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 7 > + NETXBIG_LED_SATA 1 > + NETXBIG_LED_TIMER1 3>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + red-sata0 { > + label = "netxbig:red:sata0"; > + mode-addr = <3>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 2 > + NETXBIG_LED_TIMER1 4>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + blue-sata1 { > + label = "netxbig:blue:sata1"; > + mode-addr = <4>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 7 > + NETXBIG_LED_SATA 1 > + NETXBIG_LED_TIMER1 3>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + red-sata1 { > + label = "netxbig:red:sata1"; > + mode-addr = <4>; > + mode-val = <NETXBIG_LED_OFF 0 > + NETXBIG_LED_ON 2 > + NETXBIG_LED_TIMER1 4>; > + bright-addr = <2>; > + bright-max = <7>; > + }; > + }; > }; > > &mdio { > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
