Add support for PXA27x UDC to HTC Magician.
Signed-off-by: Petr Cvek <[email protected]>
---
arch/arm/mach-pxa/magician.c | 40 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 8ca0b67..23b59a0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -98,6 +98,10 @@
#include <linux/regulator/max1586.h>
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
#include "devices.h"
#include "generic.h"
@@ -698,6 +702,34 @@ static struct platform_device magician_camera = {
* USB "Transceiver"
*/
+#if IS_ENABLED(CONFIG_USB_PXA27X)
+static void magician_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+/* HACK, shared USB connected state with pda-power */
+int my_usb_online = 1;
+
+static int magician_udc_is_connected(void)
+{
+ /* Shared with pda_power or gpio-vbus */
+ return my_usb_online;
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+ .udc_command = magician_udc_command,
+ .udc_is_connected = magician_udc_is_connected,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+#else
+
+/* GPIO USB client vbus sensing, when no PXA UDC installed */
+
static struct resource gpio_vbus_resource = {
.flags = IORESOURCE_IRQ,
.start = IRQ_MAGICIAN_VBUS,
@@ -718,6 +750,7 @@ static struct platform_device gpio_vbus = {
.platform_data = &gpio_vbus_info,
},
};
+#endif /* IS_ENABLED(CONFIG_USB_PXA27X) */
/*
* Charging functions
@@ -1167,7 +1200,6 @@ static struct platform_device *devices[] __initdata = {
&pasic3,
&vads7846_device,
&bq24022,
- &gpio_vbus,
&power_supply,
&leds_gpio,
&magician_camera,
@@ -1175,6 +1207,11 @@ static struct platform_device *devices[] __initdata = {
/* NOTICE mutually exclusive with PXA I2C */
&i2c_gpio_bus_alt,
+
+ /* NOTICE mutually exclusive with UDC*/
+#if !(IS_ENABLED(CONFIG_USB_PXA27X))
+ &gpio_vbus,
+#endif
};
/*
@@ -1226,6 +1263,7 @@ static void __init magician_init(void)
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_udc_info(&magician_udc_info);
/* Check LCD type we have */
cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
--
1.7.12.1
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
