> On the other hand, there's pwm_bl.c which give us backlight device
> with PWM,
Lets look at this. A backlight device seems to do most of its work in
the update_status callback. It is given a brightness in
bl->props.brightness, which takes a value between 0 and
props.max_brightness.
What pwm_bl.c does it then turn this brightness value into an
artificial PWM configuration. Your proposed PWM driver then turns this
back into a brightness, since you don't actually implement the period
part of the PWM interface.
>From an architecture point of view, doesn't an LED class device, which
takes a brightness value, seem much more naturally?
It seems like implementing a generic led_bl.c driver would make sense.
It would also allow some of the code in drivers/video/backlight/ to be
eliminated. There seems to be both an LED class driver for lp55xx and
a blacklight driver lp855x_bl.c. There are duplicate lp8788, 88pm860x,
adp5520, da903x, da9052, hp6xx, and lm3533 drivers which might all be
removed if a led_bl.c generic driver existed.
> and a GPIO over PWM sounds more sane to me than GPIO over LED.
Currently two LED class drivers are calling gpiochip_add:
~/linux/drivers/leds$ grep gpiochip_add *.c
leds-pca9532.c: err = gpiochip_add(&data->gpio);
leds-tca6507.c: err = gpiochip_add(&tca->gpio);
The pca9532 has full GPIO capabilities, in as well as out. But it
seems like tca6507 is output only. The TLC59108/TLC59116 is also
output only. So a generic GPO driver on top of LED would make sense
for these two, and save some code/bugs.
>From a stand back, lets take a look at the architecture point of view,
generic led_bl and gpio-led drivers seem to make sense.
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
