On 2020-07-15 02:59, [email protected] wrote:
As I said, I just glanced at the documentation to create the patched
version of =linux-libre=, but I already downloaded the source for
=5.7.8= and the deblobbing scripts. If you have specific instructions
based on the log outputs that I am sending, let me know.
** Finding the right card
#+begin_SRC bash :results raw :wrap example
gunzip -c ./lspci-5.7.8.log.gz | grep -i vga
#+end_SRC
#+RESULTS:
#+begin_example
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
[1002:15dd] (rev c4)
#+end_example
If I run dmesg with linux-libre 5.4.48 (LTS), I also found that
#+begin_EXAMPLE
...
[ 1.523096] [drm] add ip block number 2 <vega10_ih>
[ 1.523097] [drm] add ip block number 3 <psp>
[ 1.523098] [drm] add ip block number 4 <gfx_v9_0>
...
#+end_EXAMPLE
According to
https://wiki.freedesktop.org/xorg/RadeonFeature/#decoderringforengineeringvsmarketingnames,
I would then conclude that my graphics card is
#+begin_EXAMPLE
GFX9 VEGA10, VEGA12, VEGA20, RAVEN, RENOIR 6 12 4.x 16384 16384
GCN
#+end_EXAMPLE
All that seems to agree with the source files:
#+begin_SRC bash :dir linux-5.7/drivers/gpu/drm/amd/amdgpu :var
gpuname="raven" :results raw :wrap example
find . -type f -exec grep -nH -e "$gpuname" \{\} +
#+end_SRC
#+RESULTS:
#+begin_example
./amdgpu_device.c:1519: chip_name = "raven2";
./amdgpu_device.c:1523: chip_name = "raven";
./gfx_v9_0.c:1208:static bool is_raven_kicker(struct amdgpu_device
*adev)
./gfx_v9_0.c:1228: ((!is_raven_kicker(adev) &&
./gfx_v9_0.c:1349: else if (!strcmp(chip_name, "raven") &&
(amdgpu_pm_load_smu_firmware(adev, &smu_version) == 0) &&
./gfx_v9_0.c:1564: chip_name = "raven2";
./gfx_v9_0.c:1568: chip_name = "raven";
./gfx_v9_0.c:6780: adev->gds.gds_compute_max_wave_id = 0x77; /* raven2
*/
./gfx_v9_0.c:6782: adev->gds.gds_compute_max_wave_id = 0x15f; /*
raven1 */
./soc15.c:566: /* original raven doesn't have full asic reset */
./psp_v10_0.c:55: chip_name = "raven2";
./psp_v10_0.c:59: chip_name = "raven";
./sdma_v4_0.c:555: chip_name = "raven2";
./sdma_v4_0.c:559: chip_name = "raven";
#+end_example
#+begin_SRC bash :dir linux-5.7/drivers/gpu/drm/amd/amdgpu :var
gpuname="raven" look4="_init_microcode" :results raw :wrap example
while IFS= read src_file; do
grep -nH -e "$look4" "$src_file"
done < <(find . -type f -exec grep -l -e "$gpuname" \{\} +)
#+end_SRC
#+RESULTS:
#+begin_example
./gfx_v9_0.c:1545:static int gfx_v9_0_init_microcode(struct
amdgpu_device *adev)
./gfx_v9_0.c:2228: r = gfx_v9_0_init_microcode(adev);
./psp_v10_0.c:42:static int psp_v10_0_init_microcode(struct psp_context
*psp)
./psp_v10_0.c:372: .init_microcode = psp_v10_0_init_microcode,
./sdma_v4_0.c~:522: * sdma_v4_0_init_microcode - load ucode images from
disk
./sdma_v4_0.c~:533:static int sdma_v4_0_init_microcode(struct
amdgpu_device *adev)
./sdma_v4_0.c~:1763: r = sdma_v4_0_init_microcode(adev);
./gfx_v9_0.c~:1545:static int gfx_v9_0_init_microcode(struct
amdgpu_device *adev)
./gfx_v9_0.c~:2228: r = gfx_v9_0_init_microcode(adev);
./sdma_v4_0.c:522: * sdma_v4_0_init_microcode - load ucode images from
disk
./sdma_v4_0.c:533:static int sdma_v4_0_init_microcode(struct
amdgpu_device *adev)
./sdma_v4_0.c:1763: r = sdma_v4_0_init_microcode(adev);
#+end_example
** Patching sources
The result of my modifications would be
#+begin_SRC diff :file 011-deblob-amdgpu-raven.patch
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c 2020-05-31
20:44:41.000000000 -0500
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c 2020-07-15
09:22:24.389674167 -0500
@@ -1763,5 +1763,5 @@
r = sdma_v4_0_init_microcode(adev);
if (r) {
DRM_ERROR("Failed to load sdma firmware!\n");
- return r;
+ /*(DEBLOBBED)*/;
}
/* TODO: Page queue breaks driver reload under SRIOV */
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c 2020-05-31
20:44:41.000000000 -0500
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c 2020-07-15
09:21:29.699675376 -0500
@@ -2228,5 +2228,5 @@
r = gfx_v9_0_init_microcode(adev);
if (r) {
DRM_ERROR("Failed to load gfx firmware!\n");
- return r;
+ /*(DEBLOBBED)*/;
}
r = adev->gfx.rlc.funcs->init(adev);
#+end_SRC
#+begin_SRC diff :file deblob-amdgpu-raven.patch
--- a/deblob-5.7 2020-07-09 05:53:15.000000000 -0500
+++ b/deblob-5.7 2020-07-15 11:53:29.529473809 -0500
@@ -177,7 +177,7 @@
:
else
die $1 does not contain matches for $2
- fi
+ fi
return 0
fi
;;
@@ -947,6 +947,12 @@
/r = si_init_microcode(rdev);/,/}/ s,return r;,/*(DEBLOBBED)*/,
' drivers/gpu/drm/radeon/si.c 'enable blobless activation'
clean_sed '
+/r = gfx_v9_0_init_microcode(adev);/,/}/ s,return r;,/*(DEBLOBBED)*/,
+' drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c 'enable blobless activation'
+clean_sed '
+/r = sdma_v4_0_init_microcode(adev);;/,/}/ s,return
r;,/*(DEBLOBBED)*/,
+' drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c 'enable blobless activation'
+clean_sed '
/if (!rdev->mc_fw) {/,/}/ s,return -EINVAL;,/*(DEBLOBBED)*/,
' drivers/gpu/drm/radeon/si.c 'enable blobless activation'
reject_firmware drivers/gpu/drm/radeon/cik.c
#+end_SRC
** Testing with =modprobe= failed
May be I did not conpile correctly, but I added
=011-deblob-amdgpu-raven.patch= and the corresponding sha512sum to the
PKGBUILD for =linux-libre= (from Parabola GNU/Linux). After compilation
and installation in the partition where I have SystemD, I tried to
=moprobe amdgpu= and not only does the screen go blank, but the keyboard
becomes unresponsive
-------------------------------------------------
This free account was provided by VFEmail.net - report spam to [email protected]
ONLY AT VFEmail! - Use our Metadata Mitigator to keep your email out of the
NSA's hands!
$24.95 ONETIME Lifetime accounts with Privacy Features!
15GB disk! No bandwidth quotas!
Commercial and Bulk Mail Options!
--- a/deblob-5.7 2020-07-09 05:53:15.000000000 -0500
+++ b/deblob-5.7 2020-07-15 11:53:29.529473809 -0500
@@ -177,7 +177,7 @@
:
else
die $1 does not contain matches for $2
- fi
+ fi
return 0
fi
;;
@@ -947,6 +947,12 @@
/r = si_init_microcode(rdev);/,/}/ s,return r;,/*(DEBLOBBED)*/,
' drivers/gpu/drm/radeon/si.c 'enable blobless activation'
clean_sed '
+/r = gfx_v9_0_init_microcode(adev);/,/}/ s,return r;,/*(DEBLOBBED)*/,
+' drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c 'enable blobless activation'
+clean_sed '
+/r = sdma_v4_0_init_microcode(adev);;/,/}/ s,return r;,/*(DEBLOBBED)*/,
+' drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c 'enable blobless activation'
+clean_sed '
/if (!rdev->mc_fw) {/,/}/ s,return -EINVAL;,/*(DEBLOBBED)*/,
' drivers/gpu/drm/radeon/si.c 'enable blobless activation'
reject_firmware drivers/gpu/drm/radeon/cik.c
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c 2020-05-31 20:44:41.000000000 -0500
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c 2020-07-15 09:22:24.389674167 -0500
@@ -1763,5 +1763,5 @@
r = sdma_v4_0_init_microcode(adev);
if (r) {
DRM_ERROR("Failed to load sdma firmware!\n");
- return r;
+ /*(DEBLOBBED)*/;
}
/* TODO: Page queue breaks driver reload under SRIOV */
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c 2020-05-31 20:44:41.000000000 -0500
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c 2020-07-15 09:21:29.699675376 -0500
@@ -2228,5 +2228,5 @@
r = gfx_v9_0_init_microcode(adev);
if (r) {
DRM_ERROR("Failed to load gfx firmware!\n");
- return r;
+ /*(DEBLOBBED)*/;
}
r = adev->gfx.rlc.funcs->init(adev);
_______________________________________________
linux-libre mailing list
[email protected]
http://www.fsfla.org/cgi-bin/mailman/listinfo/linux-libre
