Dne 21.3.2016 v 14:30 Manuel Bernal Llinares napsal(a):
Hi guys,
I’m trying to set up lvmcache for a backup volume I use for time machine.
I’ve seen there is quite a lot of very good documentation about this, but also
out of sync between different linux systems, e.g. I can’t get those cache*
attributes when running lvs on debian 8.
As you can see under this lines, “tmachine” is a cached LVM volume
# lvs -a
LV VG Attr LSize Pool Origin
Data% Meta% Move Log Cpy%Sync Convert
backups blackhole -wi-ao---- 5,00t
clasificador blackhole -wi-ao---- 1,00t
[lvol0_pmspare] blackhole ewi------- 592,00m
nfs_home blackhole -wi-ao---- 1,00t
tmachine blackhole Cwi-aoC--- 3,00t tmachine_cache
[tmachine_corig]
tmachine_cache blackhole Cwi---C--- 231,67g
[tmachine_cache_cdata] blackhole Cwi-ao---- 231,67g
[tmachine_cache_cmeta] blackhole ewi-ao---- 592,00m
[tmachine_corig] blackhole owi-aoC--- 3,00t
Even with a couple of mac computers sending its time machine data for a while,
the cache seems to not be working.
This are the parameters described by “dmsetup status” when run on that volume:
# dmsetup status /dev/blackhole/tmachine
0 6442450944 cache 8 12849/151552 128 11886/3795648 17772 177033 2798405
1620326 0 3856 1 1 writeback 2 migration_threshold 2048 mq 10 random_threshold
4 sequential_threshold 512 discard_promote_adjustment 1 read_promote_adjustment
4 write_promote_adjustment 8
I’ve tested another cache alternative (flashcache) before, and the parameter
"sequential_threshold” sounds familiar to me, I suspect it is the one making
the cache flag the data transfer as “sequential”, passing it through to the backend
(slow) device, instead of using the cache to absorb the writing traffic, and clean
dirty blocks later, behavior I saw when using flashcache.
“sequential_threshold” is configured, by default, with a value of 512, but I
haven’t been able to find what’s that 512, maybe extents, bytes, kb, mb?
Unfortunately, I haven’t been able to find a way, at least in Debian, to change
those parameters, neither creating the cache nor once it’s already been created.
Any ideas?
'mq' policy is rather obsoleted.
Now it's suggested to use 'smq' which should be better in all aspects.
So please try usage of new 'smq' first (which happens to have no configurables
ATM - it's auto-tunning and consumes less memory).
You also need relatively new lvm2 to show all cache settings via lvm2 'lvs'
attrs.
Regards
Zdenek
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
