Hi!
On 04/20/2017 04:29 PM, emmanuel segura wrote:
maybe you are using an old clvm version, I rember that in the new
version you don't need to execute any command on the secondary node.
Thanks for your reply! Yes, I don't need to execute any command on any
remote node. But, in such case, we need "clvmd -R" on one of the nodes.

BTW, my versions:
lvm2-clvm-2.02.120-72.8.x86_64
lvm2-2.02.120-72.8.x86_64

Regards,
Eric

2017-04-20 10:06 GMT+02:00 Eric Ren <z...@suse.com>:
Hi!

This issue can be replicated by the following steps:
1. setup two-node HA cluster with dlm and clvmd RAs configured;
2. prepare a shared disk through iscsi, named "sdb" for example;

3. execute lvm cmds on n1:
lvm2dev1:~# pvcreate /dev/sdb
Physical volume "/dev/sdb" successfully created
lvm2dev1:~ # vgcreate vg1 /dev/sdb
     Clustered volume group "vg1" successfully created
lvm2dev1:~ # lvcreate -l100%VG -n lv1 vg1
     Logical volume "lv1" created.
lvm2dev1:~ # lvchange -an vg1/lv1

4. disconnect shared iscsi disk on n2;
5. to activate vg1/lv1 on n1:
lvm2dev1:~ # lvchange -ay vg1/lv1
     Error locking on node UNKNOWN 1084783200: Volume group for uuid not
found: TG0VguoR1HxSO1OPA0nk737FJSQTLYAMKV2M20cfttItrRnJetTZmKxtKs3a88Ri

6. re-connect shared disk on n2;
7. execute `clvmd -R` on n1; and then I can activate lv1 successfully.

In local mode, lvm will make a full scan on disks each time when lvmetad is
disable. As we know,
lvmetad is also disable when clvm is in use, so that  device cache can not
be refreshed automatically
when device is added or removed. We can solve this issue by executing "clvmd
-R" manually. But,
in some auto scripts, it's boring to put "clvmd -R" before some lvm commands
everywhere.

So, is there an option to enable full scan every time when lvm is invoked in
cluster scenario?
Thanks in advance:)

Regards,
Eric

On 04/14/2017 06:27 PM, Eric Ren wrote:
Hi!

In cluster environment, lvcreate/lvchange may fail to activate logical
volumes sometimes.

For example:

# lvcreate -l100%VG -n lv001 clustermd
    Error locking on node a52cbcb: Volume group for uuid not found:
SPxo6WiQhEJWDFyeul4gKYX2bNDVEsoXRNfU3fI5TI9Pd3OrIEuIm8jGtElDJzEy
    Failed to activate new LV.

The log file for this failure is attached. My thoughts on this issue
follows, for example on two nodes:
n1:
===
#lvchange -ay vg/lv1
...
clvmd will ask for peer daemon on n2
to activate lv1 as well

n2:
===
lvm need to find lv1 and the PVs for lv1,
in device cache which aims to avoid frequent scan all
disks. But if the PV(s) might not be available
in device cache, it responses n1 with errors....

We found that 'clvmd -R' can be a workaround before activating LV, because
what "clvmd -R" is to refresh device cache on every node as its commit
message said:
===
commit 13583874fcbdf1e63239ff943247bf5a21c87862
Author: Patrick Caulfield <pcaul...@redhat.com>
Date:   Wed Oct 4 08:22:16 2006 +0000

      Add -R switch to clvmd.
      This option will instruct all the clvmd daemons in the cluster to
reload their device cache
==

I think the reason why clvm doesn't refresh device cache every time before
activating LV,
is to avoid scanning all disks frequently.

But, I'm not sure if I understand this issue correctly, will appreciate
much if someone can
help.

Regards,
Eric




_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/


_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/



_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

Reply via email to