Fix the flakiness in the CUDA ADB driver (keypresses getting wedged down
or ADB just going AWOL altogether). Stops lost VIA1 interrupts.
Tested on Quadra 840av & 660av, LC630 and LC475. (This does not address
the problems with the other m68k Mac ADB drivers.)
Signed-off-by: Finn Thain <[EMAIL PROTECTED]>
arch/m68k/mac/via.c | 2 +-
drivers/macintosh/via-cuda.c | 26 +++++++++++++++++++++-----
2 files changed, 22 insertions(+), 6 deletions(-)
Index: linux-2.6.18/drivers/macintosh/via-cuda.c
===================================================================
--- linux-2.6.18.orig/drivers/macintosh/via-cuda.c 2006-12-26
13:48:02.000000000 +1100
+++ linux-2.6.18/drivers/macintosh/via-cuda.c 2006-12-26 14:11:43.000000000
+1100
@@ -429,16 +429,19 @@ cuda_start(void)
void
cuda_poll(void)
{
- unsigned long flags;
-
/* cuda_interrupt only takes a normal lock, we disable
* interrupts here to avoid re-entering and thus deadlocking.
- * An option would be to disable only the IRQ source with
- * disable_irq(), would that work on m68k ? --BenH
*/
+#ifdef CONFIG_MAC
+ disable_irq(IRQ_MAC_ADB);
+ cuda_interrupt(0, NULL, NULL);
+ enable_irq(IRQ_MAC_ADB);
+#else
+ unsigned long flags;
local_irq_save(flags);
cuda_interrupt(0, NULL, NULL);
local_irq_restore(flags);
+#endif
}
static irqreturn_t
@@ -453,13 +456,26 @@ cuda_interrupt(int irq, void *arg, struc
spin_lock(&cuda_lock);
+#ifdef CONFIG_MAC
+ /* only do this when polling */
+ if (!arg) {
+ virq = in_8(&via[IFR]) & 0x7f;
+ if ((virq & SR_INT) == 0) {
+ spin_unlock(&cuda_lock);
+ return IRQ_NONE;
+ }
+ out_8(&via[IFR], SR_INT);
+ }
+#else
+ /* it would appear that powermacs don't use the other VIA interrupts */
virq = in_8(&via[IFR]) & 0x7f;
out_8(&via[IFR], virq);
if ((virq & SR_INT) == 0) {
spin_unlock(&cuda_lock);
return IRQ_NONE;
}
-
+#endif
+
status = (~in_8(&via[B]) & (TIP|TREQ)) | (in_8(&via[ACR]) & SR_OUT);
/* printk("cuda_interrupt: state=%d status=%x\n", cuda_state, status); */
switch (cuda_state) {
Index: linux-2.6.18/arch/m68k/mac/via.c
===================================================================
--- linux-2.6.18.orig/arch/m68k/mac/via.c 2006-12-26 13:48:02.000000000
+1100
+++ linux-2.6.18/arch/m68k/mac/via.c 2006-12-26 14:11:43.000000000 +1100
@@ -431,8 +431,8 @@ irqreturn_t via1_irq(int irq, void *dev_
for (i = 0, irq_bit = 1 ; i < 7 ; i++, irq_bit <<= 1)
if (events & irq_bit) {
via1[vIER] = irq_bit;
- m68k_handle_int(VIA1_SOURCE_BASE + i, regs);
via1[vIFR] = irq_bit;
+ m68k_handle_int(VIA1_SOURCE_BASE + i, regs);
via1[vIER] = irq_bit | 0x80;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
