Hi Christian! Your test 2.6.18-9 is booting in my aranym here. So there must be something about my .config that is wrong. I suspect the 'cd linux; cp debian/arch/m68k/config.atari all.config; make allnoconfig' to not to be the right way. The need to modify the config.atari was also suspicious to me.
I will try to use the config in the binary package you have on your site and will report results later. I guess my question now is 'Where is the debian binary kernel image package .config taken from or how is it generated?'. Thanks! Standa > -----Original Message----- > From: Christian T. Steigies [mailto:[EMAIL PROTECTED] > Sent: Wednesday, January 24, 2007 1:40 PM > To: Standa Opichal > Cc: 'Michael Schmitz'; [email protected] > Subject: Re: ide0 fails to get IRQ 2.6.8-18 inside aranym > > Hi, > On Wed, Jan 24, 2007 at 09:56:45AM -0500, Standa Opichal wrote: > > Hi! > > > > > > Or do you mean that the 2.6 kernel needs something else > > > then was present > > > > in Etch by August 2006 as Petr was creating that image? > > > > > > Not likely. But you could try to check if CONFIG_IDE_GENERIC > > > is enabled in > > > your .config .. > > > > Yes, it is. If I disable it I get: > > > > .... > > ide: Assuming 50MHz system bus speed for PIO modes; > override with idebus=xx > > ide0: Falcon IDE interface > > mice: PS/2 mouse device common for all mice > > VFS: Cannot open root device "hda1" or unknown-block(0,0) > > Please append a correct "root=" boot option > > Kernel panic - not syncing: VFS: Unable to mount root fs on > > unknown-block(0,0) > > I haven't tried the atari kernels on my falcon yet, so I am > not sure if they > should work, but Michael has probably tested them? > > The debian packages are built with a gcc-3.3.6 > cross-compiler, which can be > built from debian sources, instructions are in the source package. The > latest source package has a problem, I will submit the > workaround I received > from another user to the BTS. Perhaps there is a problem with gcc-3.4? > > Today a new linux-2.6 source package (-19) was released, > which includes > several fixes for atari and mac, maybe that will help you? > My latest test build, which shold be identical to the just > released version, > is available at: > > http://people.debian.org/~cts/debian-m68k/linux-image/ > > If aranym needs a special config, you could mail that to me, > or the changes > you had to apply to the atari config, and I will include that > in the next > version, so you could install the official debian images. > That might help > other aranym users as well, especially if we get an aranym > based buildd. > > Christian ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
