Le 16 nov. 08 à 11:52, Geert Uytterhoeven a écrit :
On Sat, 15 Nov 2008, Laurent Vivier wrote:
It allows to read data from a floppy, but not to write to, and to
eject the
floppy (useful on our Mac without eject button).
Changelog:
v2- use platform device infrastructure
v3- some cleanups, probe if chip supports SWIM mode
v4- use platform_device, correct swim_action() and swim_eject()
according swim3 driver.
v5- use a structure for IWM registers (like for SWIM ones)
Signed-off-by: Laurent Vivier <[EMAIL PROTECTED]>
---
Typically changelogs should be put here (under the first `---'),
together with
the diffstat output, as they must not be part of the final commit
message.
OK
arch/m68k/mac/config.c | 40 +
arch/m68k/mac/via.c | 9
drivers/block/Kconfig | 7
drivers/block/Makefile | 3
drivers/block/swim.c | 997
+++++++++++++++++++++++++++++++++++++++++++++++
Oops, severe whitespace damage, also in the body of the patch :-(
So I had to apply your patch manually. Please fix your mailer.
Sorry, I'll do better next time.
Index: linux-2.6/drivers/block/swim.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/drivers/block/swim.c 2008-11-14 09:36:31.000000000
+0100
+#define SWIM_IO_SIZE 0x2000
Move SWIM_IO_SIZE to arch/m68k/mac/config.c, as it's needed to set
up the
platform device resource only.
OK
+static inline void set_swim_mode(struct swim *base, int enable)
^ __iomem
+{
+ struct iwm *iwm_base;
^ __iomem
(cfr. sparse warnings, when building with `make C=1')
I don't have the command sparse on my system (debian stable).
+ unsigned long flags;
+
+ if (!enable) {
+ swim_write(base, mode0, 0xf8);
+ return;
+ }
+
+ iwm_base = (struct iwm *)base;
+ local_save_flags(flags);
+ local_irq_disable();
local_save_flags(flags) + local_irq_disable() = local_irq_save(flags)
However, to make the driver future-save (we don't have SMP nor
preempt support
yet), it's better to add a spinlock and use spin_lock_irqsave().
+ local_irq_restore(flags);
... and spin_unlock_irqrestore().
Is it really needed as this driver will only work on mac m68k and all
are uniprocessor ?
+static inline int swim_track(struct floppy_state *fs, int track)
+{
+ struct swim *base = fs->swd->base;
^ __iomem
OK for all following __iomem
+static int floppy_eject(struct floppy_state *fs)
+{
+ struct swim *base = fs->swd->base;
^ __iomem
+static inline int swim_read_sector(struct floppy_state *fs,
+ int side, int track,
+ int sector, unsigned char *buffer)
+{
+ struct swim *base = fs->swd->base;
^ __iomem
+static int floppy_read_sectors(struct floppy_state *fs,
+ int req_sector, int sectors_nb,
+ unsigned char *buffer)
+{
+ struct swim *base = fs->swd->base;
^ __iomem
+static int __devinit swim_probe(struct platform_device *dev)
+{
+ struct resource *res;
+ struct swim *swim_base;
& __iomem
+ struct swim_priv *swd;
+ int ret;
+
+ res = platform_get_resource_byname(dev, IORESOURCE_MEM, "swim-
regs");
+ if (!res) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (!request_mem_region(res->start, SWIM_IO_SIZE, CARDNAME)) {
^^^^^^^^^^^^
resource_size(res)
OK
+ ret = -EBUSY;
+ goto out;
+ }
+
+ swim_base = (struct swim *)ioremap(res->start, SWIM_IO_SIZE);
^^^^^^^^^^^^^^^ ^^^^^^^^^^^^
casts from void * are not needed resource_size(res)
OKs
+ if (!swim_base) {
+ return -ENOMEM;
+ goto out_release_io;
+ }
+
+ /* probe device */
+
+ set_swim_mode(swim_base, 1);
+ if (!get_swim_mode(swim_base)) {
+ printk(KERN_INFO "SWIM device not found !\n");
+ ret = -ENODEV;
+ goto out_iounmap;
+ }
+
+ /* set platform driver data */
+
+ swd = kzalloc(sizeof(struct swim_priv), GFP_KERNEL);
+ if (!swd) {
+ ret = -ENOMEM;
+ goto out_iounmap;
+ }
+ platform_set_drvdata(dev, swd);
+
+ swd->base = swim_base;
+
+ ret = swim_floppy_init(swd);
+ if (ret)
+ goto out_kfree;
+
+ return 0;
+
+out_kfree:
+ platform_set_drvdata(dev, NULL);
+ kfree(swd);
+out_iounmap:
+ iounmap(swim_base);
+out_release_io:
+ release_mem_region(res->start, SWIM_IO_SIZE);
^^^^^^^^^^^^
resource_size(res)
+static int __devexit swim_remove(struct platform_device *dev)
+static struct platform_driver swim_driver = {
+ .probe = swim_probe,
+ .remove = swim_remove,
^^^^^^^^^^^
As swim_remove() is marked __devexit, the `__devexit_p(swim_remove)'
in v3 was
actually correct.
OK
Index: linux-2.6/arch/m68k/mac/config.c
===================================================================
--- linux-2.6.orig/arch/m68k/mac/config.c 2008-11-12
18:17:52.000000000
+0100
+++ linux-2.6/arch/m68k/mac/config.c 2008-11-12 18:17:55.000000000
+0100
+int __init mac_platform_init(void)
+{
+ u8 *swim_base;
+
+ switch (macintosh_config->floppy_type) {
+ case MAC_FLOPPY_SWIM_ADDR1:
+ swim_base = (u8 *)(VIA1_BASE + 0x1E000);
+ break;
+ case MAC_FLOPPY_SWIM_ADDR2:
+ swim_base = (u8 *)(VIA1_BASE + 0x16000);
+ break;
+ default:
+ return 0;
+ }
+
+ swim_resources[0].name = "swim-regs";
+ swim_resources[0].start = (resource_size_t)swim_base;
+ swim_resources[0].end = (resource_size_t)(swim_base + 0x2000);
^^^^^^
SWIM_IO_SIZE
OK
+ swim_resources[0].flags = IORESOURCE_MEM;
+
+ return platform_add_devices(mac_platform_devices,
+ ARRAY_SIZE(mac_platform_devices));
+}
+
+arch_initcall(mac_platform_init);
Thank you.
Laurent
-------------------- [EMAIL PROTECTED] --------------------
"Tout ce qui est impossible reste à accomplir" Jules Verne
"Things are only impossible until they're not" Jean-Luc Picard
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
