From: Greg Ungerer <[email protected]> If we make all UART addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all.
So modify the ColdFire 54xx UART addressing so that: . UARTs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <[email protected]> --- arch/m68k/include/asm/m54xxsim.h | 16 ++++++++++------ arch/m68k/platform/54xx/config.c | 16 ++++++++-------- 2 files changed, 18 insertions(+), 14 deletions(-) diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h index 1ed8bfb..ae56b88 100644 --- a/arch/m68k/include/asm/m54xxsim.h +++ b/arch/m68k/include/asm/m54xxsim.h @@ -31,16 +31,20 @@ /* * UART module. */ -#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ -#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ -#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ -#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x8600) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x8700) /* Base address UART1 */ +#define MCFUART_BASE2 (MCF_MBAR + 0x8800) /* Base address UART2 */ +#define MCFUART_BASE3 (MCF_MBAR + 0x8900) /* Base address UART3 */ /* * Define system peripheral IRQ usage. */ -#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */ -#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */ +#define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */ +#define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + 35) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + 34) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + 33) +#define MCF_IRQ_UART3 (MCFINT_VECBASE + 32) /* * Generic GPIO support diff --git a/arch/m68k/platform/54xx/config.c b/arch/m68k/platform/54xx/config.c index ee04354..8a63283 100644 --- a/arch/m68k/platform/54xx/config.c +++ b/arch/m68k/platform/54xx/config.c @@ -29,20 +29,20 @@ static struct mcf_platform_uart m54xx_uart_platform[] = { { - .mapbase = MCF_MBAR + MCFUART_BASE1, - .irq = 64 + 35, + .mapbase = MCFUART_BASE0, + .irq = MCF_IRQ_UART0, }, { - .mapbase = MCF_MBAR + MCFUART_BASE2, - .irq = 64 + 34, + .mapbase = MCFUART_BASE1, + .irq = MCF_IRQ_UART1, }, { - .mapbase = MCF_MBAR + MCFUART_BASE3, - .irq = 64 + 33, + .mapbase = MCFUART_BASE2, + .irq = MCF_IRQ_UART2, }, { - .mapbase = MCF_MBAR + MCFUART_BASE4, - .irq = 64 + 32, + .mapbase = MCFUART_BASE3, + .irq = MCF_IRQ_UART3, }, }; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
