From: Greg Ungerer <[email protected]> Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs.
Signed-off-by: Greg Ungerer <[email protected]> --- arch/m68k/platform/5206/config.c | 27 +++++++++------------------ 1 files changed, 9 insertions(+), 18 deletions(-) diff --git a/arch/m68k/platform/5206/config.c b/arch/m68k/platform/5206/config.c index e21608c..5ac8e7b 100644 --- a/arch/m68k/platform/5206/config.c +++ b/arch/m68k/platform/5206/config.c @@ -44,26 +44,17 @@ static struct platform_device *m5206_devices[] __initdata = { /***************************************************************************/ -static void __init m5206_uart_init_line(int line, int irq) -{ - if (line == 0) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); - writeb(irq, MCFUART_BASE0 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART0); - } else if (line == 1) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); - writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART1); - } -} - static void __init m5206_uarts_init(void) { - const int nrlines = ARRAY_SIZE(m5206_uart_platform); - int line; - - for (line = 0; (line < nrlines); line++) - m5206_uart_init_line(line, m5206_uart_platform[line].irq); + /* UART0 interrupt setup */ + writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); + writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR); + mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0); + + /* UART1 interrupt setup */ + writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); + writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR); + mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1); } /***************************************************************************/ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
