From: Greg Ungerer <[email protected]> The ColdFire legacy timer code is used by ColdFire parts using the old 16bit hardware timer module. It is no longer used by the m5441x or 53xx parts, so changes to support them can be cleaned out.
Signed-off-by: Greg Ungerer <[email protected]> --- arch/m68k/include/asm/mcftimer.h | 4 ---- arch/m68k/platform/coldfire/timers.c | 16 ++-------------- 2 files changed, 2 insertions(+), 18 deletions(-) diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h index 089f0f1..769acf3 100644 --- a/arch/m68k/include/asm/mcftimer.h +++ b/arch/m68k/include/asm/mcftimer.h @@ -19,11 +19,7 @@ #define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ #define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ #define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ -#if defined(CONFIG_M53xx) || defined(CONFIG_M5441x) -#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ -#else #define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ -#endif /* * Bit definitions for the Timer Mode Register (TMR). diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c index cd496a2..0b222c2 100644 --- a/arch/m68k/platform/coldfire/timers.c +++ b/arch/m68k/platform/coldfire/timers.c @@ -30,20 +30,8 @@ #define FREQ (MCF_BUSCLK / 16) #define TA(a) (MCFTIMER_BASE1 + (a)) -/* - * These provide the underlying interrupt vector support. - * Unfortunately it is a little different on each ColdFire. - */ void coldfire_profile_init(void); -#if defined(CONFIG_M53xx) || defined(CONFIG_M5441x) -#define __raw_readtrr __raw_readl -#define __raw_writetrr __raw_writel -#else -#define __raw_readtrr __raw_readw -#define __raw_writetrr __raw_writew -#endif - static u32 mcftmr_cycles_per_jiffy; static u32 mcftmr_cnt; @@ -125,7 +113,7 @@ void hw_timer_init(irq_handler_t handler) * for 1 tick, not TRR. So if you want n cycles, * initialize TRR with n - 1. */ - __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR)); + __raw_writew(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR)); @@ -183,7 +171,7 @@ void coldfire_profile_init(void) /* Set up TIMER 2 as high speed profile clock */ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR)); - __raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR)); + __raw_writew(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR)); -- 1.8.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
