On Thu, 15 Jan 2015, Geert Uytterhoeven wrote: > From: Michael Schmitz <schmitz...@gmail.com> > > Add Atari specific code to the smc91x Ethernet driver. This code is used > on the EtherNAT adapter card for the Atari Falcon extension port. > > Signed-off-by: Michael Schmitz <schm...@debian.org> > Tested-by: Christian Steigies <c...@debian.org> > [geert: Sort Kconfig entries, split in hard and soft dependencies] > Signed-off-by: Geert Uytterhoeven <ge...@linux-m68k.org>
Long gone is the time I had access to hardware with this ethernet chip, but FWIW: Acked-by: Nicolas Pitre <n...@fluxnic.net> > --- > drivers/net/ethernet/smsc/Kconfig | 10 ++++++---- > drivers/net/ethernet/smsc/smc91x.h | 21 +++++++++++++++++++++ > 2 files changed, 27 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/ethernet/smsc/Kconfig > b/drivers/net/ethernet/smsc/Kconfig > index 9468e64e6007bd2e..3e97a8b43147cc7c 100644 > --- a/drivers/net/ethernet/smsc/Kconfig > +++ b/drivers/net/ethernet/smsc/Kconfig > @@ -5,8 +5,9 @@ > config NET_VENDOR_SMSC > bool "SMC (SMSC)/Western Digital devices" > default y > - depends on ARM || ISA || MAC || ARM64 || MIPS || M32R || SUPERH || \ > - BLACKFIN || MN10300 || COLDFIRE || XTENSA || NIOS2 || PCI || > PCMCIA > + depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ > + ISA || M32R || MAC || MIPS || MN10300 || NIOS2 || PCI || \ > + PCMCIA || SUPERH || XTENSA > ---help--- > If you have a network (Ethernet) card belonging to this class, say Y > and read the Ethernet-HOWTO, available from > @@ -38,8 +39,9 @@ config SMC91X > tristate "SMC 91C9x/91C1xxx support" > select CRC32 > select MII > - depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \ > - MN10300 || COLDFIRE || ARM64 || XTENSA || NIOS2) && (!OF || > GPIOLIB) > + depends on !OF || GPIOLIB > + depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ > + M32R || MIPS || MN10300 || NIOS2 || SUPERH || XTENSA > ---help--- > This is a driver for SMC's 91x series of Ethernet chipsets, > including the SMC91C94 and the SMC91C111. Say Y if you want it > diff --git a/drivers/net/ethernet/smsc/smc91x.h > b/drivers/net/ethernet/smsc/smc91x.h > index 2a38dacbbd27fba4..be67baf5f6778d08 100644 > --- a/drivers/net/ethernet/smsc/smc91x.h > +++ b/drivers/net/ethernet/smsc/smc91x.h > @@ -216,6 +216,27 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) > > #include <unit/smc91111.h> > > +#elif defined(CONFIG_ATARI) > + > +#define SMC_CAN_USE_8BIT 1 > +#define SMC_CAN_USE_16BIT 1 > +#define SMC_CAN_USE_32BIT 1 > +#define SMC_NOWAIT 1 > + > +#define SMC_inb(a, r) readb((a) + (r)) > +#define SMC_inw(a, r) readw((a) + (r)) > +#define SMC_inl(a, r) readl((a) + (r)) > +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) > +#define SMC_outw(v, a, r) writew(v, (a) + (r)) > +#define SMC_outl(v, a, r) writel(v, (a) + (r)) > +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) > +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) > +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) > +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) > + > +#define RPC_LSA_DEFAULT RPC_LED_100_10 > +#define RPC_LSB_DEFAULT RPC_LED_TX_RX > + > #elif defined(CONFIG_ARCH_MSM) > > #define SMC_CAN_USE_8BIT 0 > -- > 1.9.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html