Up to now we have only had support for the PCI bus when running the
ColdFire CPU family with the MMU enabled. The only reason for this was
the incomplete state of the IO remapping and access functions when
running with the MMU disabled.

Recent fixes and improvements to the ColdFire IO access code means we
can now support the PCI bus when running non-MMU enabled as well.
So modify the configuration support to allow it to be selected no matter
what choice of MMU mode is used.

Signed-off-by: Greg Ungerer <g...@linux-m68k.org>
 arch/m68k/Kconfig.bus | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index d5e66ec..aef698f 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -59,6 +59,10 @@ config ATARI_ROM_ISA
        def_bool ISA
+source "drivers/zorro/Kconfig"
 config PCI
        bool "PCI support"
        depends on M54xx
@@ -66,10 +70,8 @@ config PCI
          Enable the PCI bus. Support for the PCI bus hardware built into the
          ColdFire 547x and 548x processors.
+if PCI
 source "drivers/pci/Kconfig"
-source "drivers/zorro/Kconfig"
 if !MMU

To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to