On 09/04/2016 10:05 PM, Helen Koike wrote:
> Hi Hans,
>
> Thank you for your review.
>
> On 2016-08-22 07:57 AM, Hans Verkuil wrote:
>> Hi Helen,
>>
>> A few small code comments are below.
>>
>> Note that if I try to capture I see these two messages in the kernel log:
>>
>> [588197.368145] vimc vimc.0: Entity type for entity Sensor A was not
>> initialized!
>> [588197.368169] vimc vimc.0: Entity type for entity Sensor B was not
>> initialized!
>
>
> I correct this, I am sending it in v6.
>
>
>>
>> I also can't capture anything: v4l2-ctl --stream-mmap just sits there,
>> waiting for
>> frames, I guess.
>>
>> I'm not sure if that has to do with the two warnings above.
>
>
> This is weird, v4l2-ctl --stream-mmap works for me even with those
> messages above, could you try again with the v6 please?
Yup, v6 fixed it for me. Not sure what was the cause, but it's now working fine.
Once I have Laurent's Ack I'll take it.
Thanks for all your hard work, I'm sure you expected this to get in sooner, but
better late than never!
Hans
>
>
>>
>> I am assuming that the initial pipeline is correct and that you should be
>> able
>> to start streaming. If not, then attempting to start streaming should return
>> an
>> error.
>>
>> On 08/18/2016 12:09 AM, Helen Koike wrote:
>>> From: Helen Fornazier <[email protected]>
>>>
>>> First version of the Virtual Media Controller.
>>> Add a simple version of the core of the driver, the capture and
>>> sensor nodes in the topology, generating a grey image in a hardcoded
>>> format.
>>>
>>> Signed-off-by: Helen Koike <[email protected]>
>>
>> <snip>
>>
>>> +static int vimc_cap_querycap(struct file *file, void *priv,
>>> + struct v4l2_capability *cap)
>>> +{
>>> + struct vimc_cap_device *vcap = video_drvdata(file);
>>> +
>>> + strlcpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
>>> + strlcpy(cap->card, KBUILD_MODNAME, sizeof(cap->card));
>>> + snprintf(cap->bus_info, sizeof(cap->bus_info),
>>> + "platform:%s", vcap->v4l2_dev->name);
>>> +
>>> + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
>>
>> This line should be moved to vimc_cap_create:
>>
>> vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
>>
>> This is new. The v4l2 core will fill in the querycap capabilities for you
>> based on vdev->device_caps.
>>
>>> +
>>> + return 0;
>>> +}
>>
>> <snip>
>>
>>> +static int vimc_device_register(struct vimc_device *vimc)
>>> +{
>>> + unsigned int i;
>>> + int ret = 0;
>>> +
>>> + /* Allocate memory for the vimc_ent_devices pointers */
>>> + vimc->ved = devm_kcalloc(vimc->mdev.dev, vimc->pipe_cfg->num_ents,
>>> + sizeof(*vimc->ved), GFP_KERNEL);
>>> + if (!vimc->ved)
>>> + return -ENOMEM;
>>> +
>>> + /* Register the media device */
>>> + ret = media_device_register(&vimc->mdev);
>>> + if (ret) {
>>> + dev_err(vimc->mdev.dev,
>>> + "media device register failed (err=%d)\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + /* Link the media device within the v4l2_device */
>>> + vimc->v4l2_dev.mdev = &vimc->mdev;
>>> +
>>> + /* Register the v4l2 struct */
>>> + ret = v4l2_device_register(vimc->mdev.dev, &vimc->v4l2_dev);
>>> + if (ret) {
>>> + dev_err(vimc->mdev.dev,
>>> + "v4l2 device register failed (err=%d)\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + /* Initialize entities */
>>> + for (i = 0; i < vimc->pipe_cfg->num_ents; i++) {
>>> + struct vimc_ent_device *(*create_func)(struct v4l2_device *,
>>> + const char *const,
>>> + u16,
>>> + const unsigned long *);
>>> +
>>> + /* Register the specific node */
>>> + switch (vimc->pipe_cfg->ents[i].node) {
>>> + case VIMC_ENT_NODE_SENSOR:
>>> + create_func = vimc_sen_create;
>>> + break;
>>> +
>>> + case VIMC_ENT_NODE_CAPTURE:
>>> + create_func = vimc_cap_create;
>>> + break;
>>> +
>>> + /* TODO: Instantiate the specific topology node */
>>> + case VIMC_ENT_NODE_INPUT:
>>> + case VIMC_ENT_NODE_DEBAYER:
>>> + case VIMC_ENT_NODE_SCALER:
>>> + default:
>>> + /* TODO: remove this when all the entities specific
>>> + * code are implemented
>>> + */
>>> + create_func = vimc_raw_create;
>>> + break;
>>> + }
>>> +
>>> + vimc->ved[i] = create_func(&vimc->v4l2_dev,
>>> + vimc->pipe_cfg->ents[i].name,
>>> + vimc->pipe_cfg->ents[i].pads_qty,
>>> + vimc->pipe_cfg->ents[i].pads_flag);
>>> + if (IS_ERR(vimc->ved[i])) {
>>> + ret = PTR_ERR(vimc->ved[i]);
>>> + vimc->ved[i] = NULL;
>>> + goto err;
>>> + }
>>> +
>>> + /* Set use_count to keep track of the ved structure */
>>> + vimc->ved[i]->ent->use_count = i;
>>> + }
>>> +
>>> + /* Initialize the links between entities */
>>> + for (i = 0; i < vimc->pipe_cfg->num_links; i++) {
>>> + const struct vimc_ent_link *link = &vimc->pipe_cfg->links[i];
>>> +
>>> + ret = media_create_pad_link(vimc->ved[link->src_ent]->ent,
>>> + link->src_pad,
>>> + vimc->ved[link->sink_ent]->ent,
>>> + link->sink_pad,
>>> + link->flags);
>>> + if (ret)
>>> + goto err;
>>> + }
>>> +
>>> + /* Expose all subdev's nodes*/
>>> + ret = v4l2_device_register_subdev_nodes(&vimc->v4l2_dev);
>>> + if (ret) {
>>> + dev_err(vimc->mdev.dev,
>>> + "vimc subdev nodes registration failed (err=%d)\n",
>>> + ret);
>>> + goto err;
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +err:
>>> + /* Destroy de so far created topology */
>>
>> s/de/the/
>>
>>> + vimc_device_unregister(vimc);
>>> +
>>> + return ret;
>>> +}
>>
>> Regards,
>>
>> Hans
>>
>
>
> Regards,
> Helen
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
