Hi,
I have a fairly old dvico dual digital 4 tuner and remote.
There seem to be some issues with support for it, can I help fix them?
I am using ir-keytable 1.10.0-1 on Ubuntu 16.04 LTS,
with kernel 4.4.0-47-generic (package version 4.4.0-47-generic)
The remote's keymapping is the one in /lib/udev/rc_keymaps/dvico_mce;
kernel support for the device is in media/usb/dvb-usb/cxusb.c.
Mostly it works, in that I get correct keycodes back from evtest
and ir-keytable -t. But I want to change some of the keycode mappings
and that is not working.
# cat >testfile
0xfe47 KEY_PAUSE
^D
# ir-keytable -v -d /dev/input/event15 -w testfile
Parsing testfile keycode file
parsing 0xfe47=KEY_PAUSE: value=119
Opening /dev/input/event15
Input Protocol version: 0x00010001
fe47=0077
Wrote 1 keycode(s) to driver
So far so good, yes? But evtest still reports the same keycode
for the key I tried to modify.
# evtest
<select device 15>
<press PLAYPAUSE key on remote>
Event: time 1479206112.262746, type 1 (EV_KEY), code 164 (KEY_PLAYPAUSE),
value 1
Event: time 1479206112.262746, -------------- SYN_REPORT ------------
Event: time 1479206112.262760, type 1 (EV_KEY), code 164 (KEY_PLAYPAUSE),
value 0
Event: time 1479206112.262760, -------------- SYN_REPORT ------------
# irkeytable -r -d /dev/input/event15 |grep PAUSE
Enabled protocols: unknown rc-5 sony nec sanyo mce-kbd rc-6 sharp xmp
scancode 0xfe02 = KEY_PAUSE (0x77)
scancode 0xfe47 = KEY_PLAYPAUSE (0xa4)
I thought that I might need to clear and replace the entire table
to get things working. This is where the problems really start.
First trying to clear the table causes an infinite loop.
# ir-keytable -d /dev/input/event15 -c
Opening /dev/input/event15
Input Protocol version: 0x00010001
Deleting entry 1
Deleting entry 2
Deleting entry 3
Deleting entry 4
....
Deleting entry 2114689
Deleting entry 2114690
^C
Then I tried to load a modified version of dvico_mce
The whole file was there, with just this change:
--- dvico_mce 2016-11-13 22:50:11.442092350 +1100
+++ testfile 2016-11-16 20:46:29.361411631 +1100
@@ -38,7 +38,7 @@
0xfe03 KEY_0
0xfe1f KEY_ZOOM
0xfe43 KEY_REWIND
-0xfe47 KEY_PLAYPAUSE
+0xfe47 KEY_PAUSE
0xfe4f KEY_FASTFORWARD
0xfe57 KEY_MUTE
0xfe0d KEY_STOP
The program seems to parse the modified file ok but then
segaults while reading from the input device.
# ir-keytable -v -d /dev/input/event15 -w testfile
Parsing testfile keycode file
parsing 0xfe02=KEY_TV: value=377
parsing 0xfe0e=KEY_MP3: value=391
parsing 0xfe1a=KEY_DVD: value=389
parsing 0xfe1e=KEY_FAVORITES: value=364
parsing 0xfe16=KEY_SETUP: value=141
parsing 0xfe46=KEY_POWER2: value=356
parsing 0xfe0a=KEY_EPG: value=365
parsing 0xfe49=KEY_BACK: value=158
parsing 0xfe4d=KEY_MENU: value=139
parsing 0xfe51=KEY_UP: value=103
parsing 0xfe5b=KEY_LEFT: value=105
parsing 0xfe5f=KEY_RIGHT: value=106
parsing 0xfe53=KEY_DOWN: value=108
parsing 0xfe5e=KEY_OK: value=352
parsing 0xfe59=KEY_INFO: value=358
parsing 0xfe55=KEY_TAB: value=15
parsing 0xfe0f=KEY_PREVIOUSSONG: value=165
parsing 0xfe12=KEY_NEXTSONG: value=163
parsing 0xfe42=KEY_ENTER: value=28
parsing 0xfe15=KEY_VOLUMEUP: value=115
parsing 0xfe05=KEY_VOLUMEDOWN: value=114
parsing 0xfe11=KEY_CHANNELUP: value=402
parsing 0xfe09=KEY_CHANNELDOWN: value=403
parsing 0xfe52=KEY_CAMERA: value=212
parsing 0xfe5a=KEY_TUNER: value=386
parsing 0xfe19=KEY_OPEN: value=134
parsing 0xfe0b=KEY_1: value=2
parsing 0xfe17=KEY_2: value=3
parsing 0xfe1b=KEY_3: value=4
parsing 0xfe07=KEY_4: value=5
parsing 0xfe50=KEY_5: value=6
parsing 0xfe54=KEY_6: value=7
parsing 0xfe48=KEY_7: value=8
parsing 0xfe4c=KEY_8: value=9
parsing 0xfe58=KEY_9: value=10
parsing 0xfe13=KEY_ANGLE: value=371
parsing 0xfe03=KEY_0: value=11
parsing 0xfe1f=KEY_ZOOM: value=372
parsing 0xfe43=KEY_REWIND: value=168
parsing 0xfe47=KEY_PAUSE: value=119
parsing 0xfe4f=KEY_FASTFORWARD: value=208
parsing 0xfe57=KEY_MUTE: value=113
parsing 0xfe0d=KEY_STOP: value=128
parsing 0xfe01=KEY_RECORD: value=167
parsing 0xfe4e=KEY_POWER: value=116
Read dvico_mce table
Opening /dev/input/event15
Input Protocol version: 0x00010001
fe4e=0074
fe01=00a7
fe0d=0080
fe57=0071
fe4f=00d0
fe47=0077
fe43=00a8
fe1f=0174
fe03=000b
fe13=0173
fe58=000a
fe4c=0009
fe48=0008
fe54=0007
fe50=0006
fe07=0005
fe1b=0004
fe17=0003
fe0b=0002
fe19=0086
fe5a=0182
fe52=00d4
fe09=0193
fe11=0192
fe05=0072
fe15=0073
fe42=001c
fe12=00a3
fe0f=00a5
fe55=000f
fe59=0166
fe5e=0160
fe53=006c
fe5f=006a
fe5b=0069
fe51=0067
fe4d=008b
fe49=009e
fe0a=016d
fe46=0164
fe16=008d
fe1e=016c
fe1a=0185
fe0e=0187
fe02=0179
Wrote 45 keycode(s) to driver
Segmentation fault (core dumped)
Is this just operator error?
What further diagnostics would help?
Vince
PS evtest reports this about the device:
# evtest /dev/input/event15
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0xfe9 product 0xdb78 version 0x827b
Input device name: "IR-receiver inside an USB DVB receiver"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
...<elided>...
Event code 403 (KEY_CHANNELDOWN)
Properties:
Testing ... (interrupt to exit)
^C
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
