On Mon, Jan 30, 2017 at 03:06:25PM +0100, Hans Verkuil wrote:
> From: Hans Verkuil <[email protected]>
>
> Update the bindings for this device based on a working DT example.
>
> Signed-off-by: Hans Verkuil <[email protected]>
> ---
> .../devicetree/bindings/media/i2c/ov2640.txt | 22
> ++++++++++------------
> 1 file changed, 10 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> index c429b5b..5e6c445 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> @@ -1,8 +1,8 @@
> * Omnivision OV2640 CMOS sensor
>
> -The Omnivision OV2640 sensor support multiple resolutions output, such as
> -CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
> -output format.
> +The Omnivision OV2640 sensor supports multiple resolutions output, such as
> +CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
> +output formats.
>
> Required Properties:
> - compatible: should be "ovti,ov2640"
> @@ -20,20 +20,18 @@
> Documentation/devicetree/bindings/media/video-interfaces.txt.
> Example:
>
> i2c1: i2c@f0018000 {
> + status = "okay";
There's no point in showing status in examples.
> +
> ov2640: camera@0x30 {
Drop the '0x' while here.
With that,
Acked-by: Rob Herring <[email protected]>
> compatible = "ovti,ov2640";
> reg = <0x30>;
> -
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn
> &pinctrl_ov2640_resetb>;
> -
> - resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
> - pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
> -
> - clocks = <&pck1>;
> + pinctrl-0 = <&pinctrl_pck0_as_isi_mck
> &pinctrl_sensor_power &pinctrl_sensor_reset>;
> + resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
> + pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
> + clocks = <&pck0>;
> clock-names = "xvclk";
> -
> - assigned-clocks = <&pck1>;
> + assigned-clocks = <&pck0>;
> assigned-clock-rates = <25000000>;
>
> port {
> --
> 2.10.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
