mxl111sf uses a lot of kernel stack memory as it puts an i2c_client structure on the stack:
drivers/media/usb/dvb-usb-v2/mxl111sf.c: In function 'mxl111sf_init': drivers/media/usb/dvb-usb-v2/mxl111sf.c:953:1: error: the frame size of 1248 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] We can avoid doing this by open-coding the call to i2c_transfer() instead of calling tveeprom_read(), and not passing an i2c_client pointer to tveeprom_hauppauge_analog(), which would ignore that anyway. Signed-off-by: Arnd Bergmann <[email protected]> --- drivers/media/usb/dvb-usb-v2/mxl111sf.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 80c635980526..60bc5cc9a483 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -919,7 +919,12 @@ static int mxl111sf_init(struct dvb_usb_device *d) struct mxl111sf_state *state = d_to_priv(d); int ret; static u8 eeprom[256]; - struct i2c_client c; + u8 reg = 0; + struct i2c_msg msg[2] = { + { .addr = 0xa0 >> 1, .len = 1, .buf = ® }, + { .addr = 0xa0 >> 1, .flags = I2C_M_RD, + .len = sizeof(eeprom), .buf = eeprom }, + }; ret = get_chip_info(state); if (mxl_fail(ret)) @@ -930,13 +935,10 @@ static int mxl111sf_init(struct dvb_usb_device *d) if (state->chip_rev > MXL111SF_V6) mxl111sf_config_pin_mux_modes(state, PIN_MUX_TS_SPI_IN_MODE_1); - c.adapter = &d->i2c_adap; - c.addr = 0xa0 >> 1; - - ret = tveeprom_read(&c, eeprom, sizeof(eeprom)); + ret = i2c_transfer(&d->i2c_adap, msg, 2); if (mxl_fail(ret)) return 0; - tveeprom_hauppauge_analog(&c, &state->tv, (0x84 == eeprom[0xa0]) ? + tveeprom_hauppauge_analog(NULL, &state->tv, (0x84 == eeprom[0xa0]) ? eeprom + 0xa0 : eeprom + 0x80); #if 0 switch (state->tv.model) { -- 2.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
