Hi again
after you kindly fixed media_build for me I applied the nec protocol
patch and tried again.
$ sudo ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
Driver imon, table rc-imon-mce
Supported protocols: rc-6
Enabled protocols: rc-6
Name: iMON Remote (15c2:ffdc)
bus: 3, vendor/product: 15c2:ffdc, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc1/ (/dev/input/event11) with:
Driver dvb_usb_cxusb, table rc-dvico-mce
Supported protocols: nec
Enabled protocols:
Name: IR-receiver inside an USB DVB re
bus: 3, vendor/product: 0fe9:db78, version: 0x827b
Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc2/ (/dev/input/event16) with:
Driver dvb_usb_af9035, table rc-empty
Supported protocols: nec
Enabled protocols:
Name: Leadtek WinFast DTV Dongle Dual
bus: 3, vendor/product: 0413:6a05, version: 0x0200
Repeat delay = 500 ms, repeat period = 125 ms
$ sudo ir-keytable -v --sysdev rc1
Found device /sys/class/rc/rc0/
Found device /sys/class/rc/rc1/
Found device /sys/class/rc/rc2/
Input sysfs node is /sys/class/rc/rc0/input8/
Event sysfs node is /sys/class/rc/rc0/input8/event5/
Parsing uevent /sys/class/rc/rc0/input8/event5/uevent
/sys/class/rc/rc0/input8/event5/uevent uevent MAJOR=13
/sys/class/rc/rc0/input8/event5/uevent uevent MINOR=69
/sys/class/rc/rc0/input8/event5/uevent uevent DEVNAME=input/event5
Parsing uevent /sys/class/rc/rc0/uevent
/sys/class/rc/rc0/uevent uevent NAME=rc-imon-mce
/sys/class/rc/rc0/uevent uevent DRV_NAME=imon
input device is /dev/input/event5
/sys/class/rc/rc0/protocols protocol rc-6 (enabled)
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
Driver imon, table rc-imon-mce
Supported protocols: rc-6
Enabled protocols: rc-6
Name: iMON Remote (15c2:ffdc)
bus: 3, vendor/product: 15c2:ffdc, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
Input sysfs node is /sys/class/rc/rc1/input17/
Event sysfs node is /sys/class/rc/rc1/input17/event11/
Parsing uevent /sys/class/rc/rc1/input17/event11/uevent
/sys/class/rc/rc1/input17/event11/uevent uevent MAJOR=13
/sys/class/rc/rc1/input17/event11/uevent uevent MINOR=75
/sys/class/rc/rc1/input17/event11/uevent uevent DEVNAME=input/event11
Parsing uevent /sys/class/rc/rc1/uevent
/sys/class/rc/rc1/uevent uevent NAME=rc-dvico-mce
/sys/class/rc/rc1/uevent uevent DRV_NAME=dvb_usb_cxusb
input device is /dev/input/event11
/sys/class/rc/rc1/protocols protocol nec (disabled)
Found /sys/class/rc/rc1/ (/dev/input/event11) with:
Driver dvb_usb_cxusb, table rc-dvico-mce
Supported protocols: nec
Enabled protocols:
Name: IR-receiver inside an USB DVB re
bus: 3, vendor/product: 0fe9:db78, version: 0x827b
Repeat delay = 500 ms, repeat period = 125 ms
Input sysfs node is /sys/class/rc/rc2/input19/
Event sysfs node is /sys/class/rc/rc2/input19/event16/
Parsing uevent /sys/class/rc/rc2/input19/event16/uevent
/sys/class/rc/rc2/input19/event16/uevent uevent MAJOR=13
/sys/class/rc/rc2/input19/event16/uevent uevent MINOR=80
/sys/class/rc/rc2/input19/event16/uevent uevent DEVNAME=input/event16
Parsing uevent /sys/class/rc/rc2/uevent
/sys/class/rc/rc2/uevent uevent NAME=rc-empty
/sys/class/rc/rc2/uevent uevent DRV_NAME=dvb_usb_af9035
input device is /dev/input/event16
/sys/class/rc/rc2/protocols protocol nec (disabled)
Found /sys/class/rc/rc2/ (/dev/input/event16) with:
Driver dvb_usb_af9035, table rc-empty
Supported protocols: nec
Enabled protocols:
Name: Leadtek WinFast DTV Dongle Dual
bus: 3, vendor/product: 0413:6a05, version: 0x0200
Repeat delay = 500 ms, repeat period = 125 ms
So only rc0 has any protocols enabled. Let's try to enable nec on rc1
$ sudo /usr/bin/ir-keytable -s rc1 -c
Old keytable cleared
$ sudo /usr/bin/ir-keytable -s rc1 -w /etc/rc_keymaps/dvico-remote
Read dvico_mce table
Wrote 45 keycode(s) to driver
Invalid protocols selected
Couldn't change the IR protocols
$ sudo /usr/bin/ir-keytable -s rc1 -p nec -v
Found device /sys/class/rc/rc0/
Found device /sys/class/rc/rc1/
Found device /sys/class/rc/rc2/
Input sysfs node is /sys/class/rc/rc1/input17/
Event sysfs node is /sys/class/rc/rc1/input17/event11/
Parsing uevent /sys/class/rc/rc1/input17/event11/uevent
/sys/class/rc/rc1/input17/event11/uevent uevent MAJOR=13
/sys/class/rc/rc1/input17/event11/uevent uevent MINOR=75
/sys/class/rc/rc1/input17/event11/uevent uevent DEVNAME=input/event11
Parsing uevent /sys/class/rc/rc1/uevent
/sys/class/rc/rc1/uevent uevent NAME=rc-dvico-mce
/sys/class/rc/rc1/uevent uevent DRV_NAME=dvb_usb_cxusb
input device is /dev/input/event11
/sys/class/rc/rc1/protocols protocol nec (disabled)
Opening /dev/input/event11
Input Protocol version: 0x00010001
/sys/class/rc/rc1//protocols: Invalid argument
Couldn't change the IR protocols
$ sudo cat /sys/class/rc/rc1/protocols
nec
$ sudo sh
# echo "+rc-5 +nec +rc-6 +jvc +sony +rc-5-sz +sanyo +sharp +xmp" >
/sys/class/rc/rc1/protocols
bash: echo: write error: Invalid argument
# cat /sys/class/rc/rc1/protocols
nec
In kern.log I got:
kernel: [ 2293.491534] rc_core: Normal protocol change requested
kernel: [ 2293.491538] rc_core: Protocol switching not supported
# echo "+nec" > /sys/class/rc/rc1/protocols
bash: echo: write error: Invalid argument
kernel: [ 2390.832476] rc_core: Normal protocol change requested
kernel: [ 2390.832481] rc_core: Protocol switching not supported
dmesg during bootup is attached.
Cheers
Vince
