On Fri, Apr 20, 2018 at 09:04:10PM +0200, Maxime Ripard wrote:
> Hi Laurent,
>
> On Thu, Apr 19, 2018 at 12:44:18PM +0300, Laurent Pinchart wrote:
> > On Monday, 16 April 2018 15:36:51 EEST Maxime Ripard wrote:
> > > From: Mylène Josserand <[email protected]>
> > >
> > > Add the light frequency control to be able to set the frequency
> > > to manual (50Hz or 60Hz) or auto.
> > >
> > > Signed-off-by: Mylène Josserand <[email protected]>
> > > Signed-off-by: Maxime Ripard <[email protected]>
> > > ---
> > > drivers/media/i2c/ov5640.c | 24 ++++++++++++++++++++++++
> > > 1 file changed, 24 insertions(+)
> > >
> > > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> > > index a33e45f8e2b0..28122341fc35 100644
> > > --- a/drivers/media/i2c/ov5640.c
> > > +++ b/drivers/media/i2c/ov5640.c
> > > @@ -189,6 +189,7 @@ struct ov5640_ctrls {
> > > };
> > > struct v4l2_ctrl *auto_focus;
> > > struct v4l2_ctrl *brightness;
> > > + struct v4l2_ctrl *light_freq;
> > > struct v4l2_ctrl *saturation;
> > > struct v4l2_ctrl *contrast;
> > > struct v4l2_ctrl *hue;
> > > @@ -2163,6 +2164,21 @@ static int ov5640_set_ctrl_focus(struct ov5640_dev
> > > *sensor, int value) BIT(1), value ? BIT(1) : 0);
> > > }
> > >
> > > +static int ov5640_set_ctl_light_freq(struct ov5640_dev *sensor, int
> > > value)
> >
> > To stay consistent with the other functions, I propose calling this
> > ov5640_set_ctrl_light_freq().
> >
> > Apart from that,
> >
> > Reviewed-by: Laurent Pinchart <[email protected]>
>
> Consider it fixed in the next iteration, thanks!
> Maxime
Applied patches 2--7 with the following diff to the first applied patch,
i.e. this one:
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index dc3950c20c62..e480e53b369b 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2178,7 +2178,7 @@ static int ov5640_set_ctrl_test_pattern(struct ov5640_dev
*sensor, int value)
0xa4, value ? 0xa4 : 0);
}
-static int ov5640_set_ctl_light_freq(struct ov5640_dev *sensor, int value)
+static int ov5640_set_ctrl_light_freq(struct ov5640_dev *sensor, int value)
{
int ret;
@@ -2262,7 +2262,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
ret = ov5640_set_ctrl_test_pattern(sensor, ctrl->val);
break;
case V4L2_CID_POWER_LINE_FREQUENCY:
- ret = ov5640_set_ctl_light_freq(sensor, ctrl->val);
+ ret = ov5640_set_ctrl_light_freq(sensor, ctrl->val);
break;
default:
ret = -EINVAL;
Thanks!
--
Sakari Ailus
[email protected]
