On 18/05/18 20:51, Ezequiel Garcia wrote:
> video_device and vb2_queue locks are now both
> mandatory. Add them, remove driver ad-hoc locks,
> and implement wait_{prepare, finish}.
>
> To stay on the safe side, this commit uses a single mutex
> for both locks. Better latency can be obtained by separating
> these if needed.
>
> Signed-off-by: Ezequiel Garcia <[email protected]>
> ---
> drivers/staging/media/omap4iss/iss_video.c | 32
> +++++++-----------------------
> drivers/staging/media/omap4iss/iss_video.h | 2 +-
> 2 files changed, 8 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/staging/media/omap4iss/iss_video.c
> b/drivers/staging/media/omap4iss/iss_video.c
> index a3a83424a926..380cfd230262 100644
> --- a/drivers/staging/media/omap4iss/iss_video.c
> +++ b/drivers/staging/media/omap4iss/iss_video.c
> @@ -260,10 +260,7 @@ __iss_video_get_format(struct iss_video *video,
> fmt.pad = pad;
> fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>
> - mutex_lock(&video->mutex);
> ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
> - mutex_unlock(&video->mutex);
> -
> if (ret)
> return ret;
>
> @@ -411,6 +408,8 @@ static const struct vb2_ops iss_video_vb2ops = {
> .buf_prepare = iss_video_buf_prepare,
> .buf_queue = iss_video_buf_queue,
> .buf_cleanup = iss_video_buf_cleanup,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> };
>
> /*
> @@ -592,9 +591,7 @@ iss_video_get_format(struct file *file, void *fh, struct
> v4l2_format *format)
> if (format->type != video->type)
> return -EINVAL;
>
> - mutex_lock(&video->mutex);
> *format = vfh->format;
> - mutex_unlock(&video->mutex);
>
> return 0;
> }
> @@ -609,8 +606,6 @@ iss_video_set_format(struct file *file, void *fh, struct
> v4l2_format *format)
> if (format->type != video->type)
> return -EINVAL;
>
> - mutex_lock(&video->mutex);
> -
> /*
> * Fill the bytesperline and sizeimage fields by converting to media bus
> * format and back to pixel format.
> @@ -620,7 +615,6 @@ iss_video_set_format(struct file *file, void *fh, struct
> v4l2_format *format)
>
> vfh->format = *format;
>
> - mutex_unlock(&video->mutex);
> return 0;
> }
>
> @@ -741,9 +735,7 @@ iss_video_set_selection(struct file *file, void *fh,
> struct v4l2_selection *sel)
> return -EINVAL;
>
> sdsel.pad = pad;
> - mutex_lock(&video->mutex);
> ret = v4l2_subdev_call(subdev, pad, set_selection, NULL, &sdsel);
> - mutex_unlock(&video->mutex);
> if (!ret)
> sel->r = sdsel.r;
>
> @@ -873,8 +865,6 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type)
> if (type != video->type)
> return -EINVAL;
>
> - mutex_lock(&video->stream_lock);
> -
> /*
> * Start streaming on the pipeline. No link touching an entity in the
> * pipeline can be activated or deactivated once streaming is started.
> @@ -978,8 +968,6 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type)
>
> media_graph_walk_cleanup(&graph);
>
> - mutex_unlock(&video->stream_lock);
> -
> return 0;
>
> err_omap4iss_set_stream:
> @@ -996,8 +984,6 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type)
> err_graph_walk_init:
> media_entity_enum_cleanup(&pipe->ent_enum);
>
> - mutex_unlock(&video->stream_lock);
> -
> return ret;
> }
>
> @@ -1013,10 +999,8 @@ iss_video_streamoff(struct file *file, void *fh, enum
> v4l2_buf_type type)
> if (type != video->type)
> return -EINVAL;
>
> - mutex_lock(&video->stream_lock);
> -
> if (!vb2_is_streaming(&vfh->queue))
> - goto done;
> + return 0;
>
> /* Update the pipeline state. */
> if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
> @@ -1041,8 +1025,6 @@ iss_video_streamoff(struct file *file, void *fh, enum
> v4l2_buf_type type)
> video->iss->pdata->set_constraints(video->iss, false);
> media_pipeline_stop(&video->video.entity);
>
> -done:
> - mutex_unlock(&video->stream_lock);
> return 0;
> }
>
> @@ -1137,6 +1119,7 @@ static int iss_video_open(struct file *file)
> q->buf_struct_size = sizeof(struct iss_buffer);
> q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> q->dev = video->iss->dev;
> + q->lock = &video->v4l_lock;
I feel too much is changed in this driver (and also the omap3isp driver in the
next patch). Why not just set q->lock to stream_lock (queue_lock for omap3isp)?
There is no need to set video->video.lock at all, that's not compulsory.
Regards,
Hans
>
> ret = vb2_queue_init(q);
> if (ret) {
> @@ -1238,12 +1221,11 @@ int omap4iss_video_init(struct iss_video *video,
> const char *name)
> if (ret < 0)
> return ret;
>
> + mutex_init(&video->v4l_lock);
> spin_lock_init(&video->qlock);
> - mutex_init(&video->mutex);
> atomic_set(&video->active, 0);
>
> spin_lock_init(&video->pipe.lock);
> - mutex_init(&video->stream_lock);
>
> /* Initialize the video device. */
> if (!video->ops)
> @@ -1252,6 +1234,7 @@ int omap4iss_video_init(struct iss_video *video, const
> char *name)
> video->video.fops = &iss_video_fops;
> snprintf(video->video.name, sizeof(video->video.name),
> "OMAP4 ISS %s %s", name, direction);
> + video->video.lock = &video->v4l_lock;
> video->video.vfl_type = VFL_TYPE_GRABBER;
> video->video.release = video_device_release_empty;
> video->video.ioctl_ops = &iss_video_ioctl_ops;
> @@ -1265,8 +1248,7 @@ int omap4iss_video_init(struct iss_video *video, const
> char *name)
> void omap4iss_video_cleanup(struct iss_video *video)
> {
> media_entity_cleanup(&video->video.entity);
> - mutex_destroy(&video->stream_lock);
> - mutex_destroy(&video->mutex);
> + mutex_destroy(&video->v4l_lock);
> }
>
> int omap4iss_video_register(struct iss_video *video, struct v4l2_device
> *vdev)
> diff --git a/drivers/staging/media/omap4iss/iss_video.h
> b/drivers/staging/media/omap4iss/iss_video.h
> index d7e05d04512c..4b8e5a8073fb 100644
> --- a/drivers/staging/media/omap4iss/iss_video.h
> +++ b/drivers/staging/media/omap4iss/iss_video.h
> @@ -148,8 +148,8 @@ struct iss_video {
> enum v4l2_buf_type type;
> struct media_pad pad;
>
> - struct mutex mutex; /* format and crop settings */
> atomic_t active;
> + struct mutex v4l_lock;
>
> struct iss_device *iss;
>
>
