On 10/18/2018 06:08 PM, Ezequiel Garcia wrote:
> The decoder interface (not yet merged) specifies that
> width and height values set on the OUTPUT queue, must
> be propagated to the CAPTURE queue.
>
> This is not enough to comply with the specification,
> which would require to properly support stream resolution
> changes detection and notification.
>
> However, it's a relatively small change, which fixes behavior
> required by some applications such as gstreamer.
>
> With this change, it's possible to run a simple T(T⁻¹) pipeline:
>
> gst-launch-1.0 videotestsrc ! v4l2fwhtenc ! v4l2fwhtdec ! fakevideosink
>
> Signed-off-by: Ezequiel Garcia <[email protected]>
> ---
> drivers/media/platform/vicodec/vicodec-core.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/media/platform/vicodec/vicodec-core.c
> b/drivers/media/platform/vicodec/vicodec-core.c
> index 1eb9132bfc85..a2c487b4b80d 100644
> --- a/drivers/media/platform/vicodec/vicodec-core.c
> +++ b/drivers/media/platform/vicodec/vicodec-core.c
> @@ -673,6 +673,13 @@ static int vidioc_s_fmt(struct vicodec_ctx *ctx, struct
> v4l2_format *f)
> q_data->width = pix->width;
> q_data->height = pix->height;
> q_data->sizeimage = pix->sizeimage;
> +
> + /* Propagate changes to CAPTURE queue */
> + if (!ctx->is_enc && V4L2_TYPE_IS_OUTPUT(f->type)) {
Do we need !ctx->is_enc? Isn't this the same for both decoder and encoder?
> + ctx->q_data[V4L2_M2M_DST].width = pix->width;
> + ctx->q_data[V4L2_M2M_DST].height = pix->height;
> + ctx->q_data[V4L2_M2M_DST].sizeimage = pix->sizeimage;
This is wrong: you are copying the sizeimage for the compressed format as the
sizeimage for the raw format, which is quite different.
I think you need to make a little helper function that can update the
width/height
of a particular queue and that can calculate the sizeimage correctly.
Regards,
Hans
> + }
> break;
> case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
> case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
> @@ -693,6 +700,14 @@ static int vidioc_s_fmt(struct vicodec_ctx *ctx, struct
> v4l2_format *f)
> q_data->width = pix_mp->width;
> q_data->height = pix_mp->height;
> q_data->sizeimage = pix_mp->plane_fmt[0].sizeimage;
> +
> + /* Propagate changes to CAPTURE queue */
> + if (!ctx->is_enc && V4L2_TYPE_IS_OUTPUT(f->type)) {
> + ctx->q_data[V4L2_M2M_DST].width = pix_mp->width;
> + ctx->q_data[V4L2_M2M_DST].height = pix_mp->height;
> + ctx->q_data[V4L2_M2M_DST].sizeimage =
> + pix_mp->plane_fmt[0].sizeimage;
> + }
> break;
> default:
> return -EINVAL;
>
