Hi Sakari,
On 18-11-16 15:32, Sakari Ailus wrote:
> Hi Marco, Enrico,
>
> On Mon, Oct 29, 2018 at 07:24:08PM +0100, Marco Felsch wrote:
> > From: Enrico Scholz <[email protected]>
> >
> > The chip can be configured to output data transitions on the
> > rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
> > falling edge.
> >
> > Parsing the fw-node is made in a subfunction to bundle all (future)
> > dt-parsing / fw-parsing stuff.
> >
> > Signed-off-by: Enrico Scholz <[email protected]>
> > ([email protected]: Fix inverting clock. INV_PIX_CLOCK bit is set
> > per default. Set bit to 0 (enable mask bit without value) to enable
> > falling edge sampling.)
> > Signed-off-by: Michael Grzeschik <[email protected]>
> > ([email protected]: use fwnode helpers)
> > ([email protected]: mv fw parsing into own function)
> > ([email protected]: adapt commit msg)
> > Signed-off-by: Marco Felsch <[email protected]>
> >
> > ---
> > Changelog:
> >
> > v2:
> > - make use of fwnode_*() to drop OF dependency and ifdef's
> > - mt9m111_g_mbus_config: fix pclk_sample logic which I made due the
> > conversion from Enrico's patch.
> >
> > drivers/media/i2c/mt9m111.c | 46 ++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 45 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> > index e9879e111f58..112eaa5ba917 100644
> > --- a/drivers/media/i2c/mt9m111.c
> > +++ b/drivers/media/i2c/mt9m111.c
> > @@ -15,12 +15,14 @@
> > #include <linux/delay.h>
> > #include <linux/v4l2-mediabus.h>
> > #include <linux/module.h>
> > +#include <linux/property.h>
> >
> > #include <media/v4l2-async.h>
> > #include <media/v4l2-clk.h>
> > #include <media/v4l2-common.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> >
> > /*
> > * MT9M111, MT9M112 and MT9M131:
> > @@ -239,6 +241,8 @@ struct mt9m111 {
> > const struct mt9m111_datafmt *fmt;
> > int lastpage; /* PageMap cache value */
> > bool is_streaming;
> > + /* user point of view - 0: falling 1: rising edge */
> > + unsigned int pclk_sample:1;
>
> You could use a bool. Up to you.
I find it more precise to use a unsigned int, because using a bool is
more like a statement e.g. invert_pclk.
[Snip]
> > static int mt9m111_probe(struct i2c_client *client,
> > const struct i2c_device_id *did)
> > {
> > @@ -1147,6 +1187,10 @@ static int mt9m111_probe(struct i2c_client *client,
> > /* Default HIGHPOWER context */
> > mt9m111->ctx = &context_b;
> >
> > + ret = mt9m111_probe_fw(client, mt9m111);
> > + if (ret)
> > + return ret;
>
> Can you do this before v4l2_clk_get()? That'll go anyway, but for now,
> you'd need extra error handling for it.
Sure, I will move it above v4l2_clk_get().
> > +
> > v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
> > mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> >
>
> Please also put this patch after the DT binding changes.
Okay, I will reorder it.
Regards,
Marco
> --
> Kind regards,
>
> Sakari Ailus
> e-mail: [email protected]
