Fixes: 9d6d20e652 ("v4l2-mc: switch it to use the new approach to setup
pipelines")
Without "taint" set for signal type, devices
with analog capture fail during probe:
[ 5.821715] cx231xx 3-2:1.1: v4l2 driver version 0.0.3
[ 5.955721] cx231xx 3-2:1.1: Registered video device video0 [v4l2]
[ 5.955797] cx231xx 3-2:1.1: Registered VBI device vbi0
[ 5.955802] cx231xx 3-2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
[ 5.955805] cx231xx 3-2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
[ 5.955807] cx231xx 3-2:1.1: sliced CC EndPoint Addr 0x86, Alternate
settings: 2
[ 5.955834] cx231xx 3-2:1.1: V4L2 device vbi0 deregistered
[ 5.955889] cx231xx 3-2:1.1: V4L2 device video0 deregistered
[ 5.959131] cx231xx: probe of 3-2:1.1 failed with error -22
[ 5.959190] usbcore: registered new interface driver cx231xx
This sets the taint for the source pad on the bridge to PAD_SIGNAL_ANALOG
Signed-off-by: Brad Love <[email protected]>
---
drivers/media/usb/cx231xx/cx231xx-video.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c
b/drivers/media/usb/cx231xx/cx231xx-video.c
index d5e51a5..12f2c00 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -1120,6 +1120,7 @@ void cx231xx_v4l2_create_entities(struct cx231xx *dev)
ent->name = iname[INPUT(i)->type];
ent->flags = MEDIA_ENT_FL_CONNECTOR;
dev->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
+ dev->input_pad[i].sig_type = PAD_SIGNAL_ANALOG;
switch (INPUT(i)->type) {
case CX231XX_VMUX_COMPOSITE1:
--
2.7.4
