On 01/21/19 11:42, Michael Tretter wrote:
> Hi Hans,
>
> On Fri, 18 Jan 2019 15:11:32 +0100, Hans Verkuil wrote:
>> Hi Michael,
>>
>> On 1/18/19 2:37 PM, Michael Tretter wrote:
>>> This is v2 of the series to add support for the Allegro DVT H.264 encoder
>>> found in the EV family of the Xilinx ZynqMP platform.
>>>
>>> See v1 [0] of the patch series for a description of the hardware.
>>>
>>> I fixed the handling of frames with various sizes and driver is now able to
>>> encode H.264 video in the baseline profile up to 1920x1080 pixels. I also
>>> addressed the issues reported by the kbuild robot for the previous series,
>>> implemented a few extended controls and changed the interface to the mcu to
>>> follow the register documentation rather than the downstream driver
>>> implementation.
>>>
>>> I would especially appreciate feedback to the device tree bindings and the
>>> overall architecture of the driver.
>>
>> I'll try to review this next week. Ping me if you didn't see a review by the
>> end of next week.
>>
>> BTW, can you post the output of 'v4l2-compliance -s'? (make sure you use the
>> very latest version of v4l2-compliance!)
>
> Thanks, here is the output of v4l2-compliance. I haven't used
> v4l2-compliance with the -s switch yet and will look into the reported
> failures for the streaming ioctls.
>
> v4l2-compliance SHA: e07d1b90190f2b98fe4f5be20406b49ecbe5b3e7, 64 bits
>
> Compliance test for allegro device /dev/video4:
>
> Driver Info:
> Driver name : allegro
> Card type : Allegro DVT Video Encoder
> Bus info : platform:a0009000.al5e
> Driver version : 5.0.0
> Capabilities : 0x84208000
> Video Memory-to-Memory
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04208000
> Video Memory-to-Memory
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video4 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 8 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> fail: v4l2-test-buffers.cpp(1920): pid != pid_streamoff
> fail: v4l2-test-buffers.cpp(1953): testBlockingDQBuf(node, q)
> test blocking wait: FAIL
> fail: v4l2-test-buffers.cpp(253): g_field() == V4L2_FIELD_ANY
> fail: v4l2-test-buffers.cpp(1157): buf.qbuf(node)
You are missing a buf_prepare callback that checks the field value for the
output buffer and replaces it with FIELD_NONE if it is FIELD_ANY.
See e.g. vim2m_buf_prepare in drivers/media/platform/vim2m.c.
Regards,
Hans
> test MMAP (no poll): FAIL
> fail: v4l2-test-buffers.cpp(253): g_field() == V4L2_FIELD_ANY
> fail: v4l2-test-buffers.cpp(1157): buf.qbuf(node)
> test MMAP (select): FAIL
> test USERPTR (no poll): OK (Not Supported)
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for allegro device /dev/video4: 50, Succeeded: 47, Failed: 3, Warnings: > 0
>
> Michael
>
>>
>> Regards,
>>
>> Hans
>>
>>>
>>> The driver still only works with the vcu-firmware release 2018.2. I am not
>>> yet
>>> sure how to address the different firmware versions, because in addition to
>>> the mailbox sizes, there are also changes within the messages themselves.
>>>
>>> I also did not address the integration with the xlnx-vcu driver, yet.
>>>
>>> Michael
>>>
>>> [0]
>>> https://lore.kernel.org/linux-media/[email protected]/
>>>
>>> Changes since v1:
>>> - clean up debug log levels
>>> - fix unused variable in allegro_mbox_init
>>> - fix uninitialized variable in allegro_mbox_write
>>> - fix global module parameters
>>> - fix Kconfig dependencies
>>> - return h264 as default codec for mcu
>>> - implement device reset as documented
>>> - document why irq does not wait for clear
>>> - rename ENCODE_ONE_FRM to ENCODE_FRAME
>>> - allow error codes for mcu_channel_id
>>> - move control handler to channel
>>> - add fw version check
>>> - add support for colorspaces
>>> - enable configuration of H.264 levels
>>> - enable configuration of frame size
>>> - enable configuration of bit rate and CPB size
>>> - enable configuration of GOP size
>>> - rework response handling
>>> - fix missing error handling in allegro_h264_write_sps
>>>
>>> Michael Tretter (3):
>>> media: dt-bindings: media: document allegro-dvt bindings
>>> [media] allegro: add Allegro DVT video IP core driver
>>> [media] allegro: add SPS/PPS nal unit writer
>>>
>>> .../devicetree/bindings/media/allegro.txt | 35 +
>>> MAINTAINERS | 6 +
>>> drivers/staging/media/Kconfig | 2 +
>>> drivers/staging/media/Makefile | 1 +
>>> drivers/staging/media/allegro-dvt/Kconfig | 16 +
>>> drivers/staging/media/allegro-dvt/Makefile | 6 +
>>> .../staging/media/allegro-dvt/allegro-core.c | 2828 +++++++++++++++++
>>> drivers/staging/media/allegro-dvt/nal-h264.c | 1278 ++++++++
>>> drivers/staging/media/allegro-dvt/nal-h264.h | 188 ++
>>> 9 files changed, 4360 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/media/allegro.txt
>>> create mode 100644 drivers/staging/media/allegro-dvt/Kconfig
>>> create mode 100644 drivers/staging/media/allegro-dvt/Makefile
>>> create mode 100644 drivers/staging/media/allegro-dvt/allegro-core.c
>>> create mode 100644 drivers/staging/media/allegro-dvt/nal-h264.c
>>> create mode 100644 drivers/staging/media/allegro-dvt/nal-h264.h
>>>
>>
>>
