This comment is already at the au0828-i2c where it belongs. So, remove it from a board's entry. It doesn't make any sense there, as we're setting the clock to 250kHz there, slowing it down only at the au0828-i2c.
Signed-off-by: Mauro Carvalho Chehab <[email protected]> diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index d229c6dbddb9..585a8f84228c 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -73,12 +73,6 @@ struct au0828_board au0828_boards[] = { .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, .has_ir_i2c = 1, - /* The au0828 hardware i2c implementation does not properly - support the xc5000's i2c clock stretching. So we need to - lower the clock frequency enough where the 15us clock - stretch fits inside of a normal clock cycle, or else the - au0828 fails to set the STOP bit. A 30 KHz clock puts the - clock pulse width at 18us */ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { { -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
