On 12/01/2014 12:00 PM, Devshatwar, Nikhil wrote:
>> -----Original Message-----
>> From: Hans Verkuil [mailto:[email protected]]
>> Sent: Monday, December 01, 2014 4:18 PM
>> To: Devshatwar, Nikhil; [email protected]
>> Subject: Re: [PATCH v3 1/4] media: ti-vpe: Use data offset for getting
>> dma_addr for a plane
>>
>> On 11/29/2014 11:27 AM, Nikhil Devshatwar wrote:
>>> The data_offset in v4l2_planes structure will help us point to the
>>> start of data content for that particular plane. This may be useful
>>> when a single buffer contains the data for different planes e.g. Y
>>> planes of two fields in the same buffer. With this, user space can
>>> pass queue top field and bottom field with same dmafd and different
>> data_offsets.
>>>
>>> Signed-off-by: Nikhil Devshatwar <[email protected]>
>>> ---
>>> Changes from v2:
>>> * Use data_offset only for OUTPUT stream buffers
>>>
>>> drivers/media/platform/ti-vpe/vpe.c | 10 +++++++++-
>>> 1 file changed, 9 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/media/platform/ti-vpe/vpe.c
>>> b/drivers/media/platform/ti-vpe/vpe.c
>>> index 9a081c2..ba26b83 100644
>>> --- a/drivers/media/platform/ti-vpe/vpe.c
>>> +++ b/drivers/media/platform/ti-vpe/vpe.c
>>> @@ -496,6 +496,14 @@ struct vpe_mmr_adb {
>>>
>>> #define VPE_SET_MMR_ADB_HDR(ctx, hdr, regs, offset_a) \
>>> VPDMA_SET_MMR_ADB_HDR(ctx->mmr_adb, vpe_mmr_adb, hdr, regs,
>>> offset_a)
>>> +
>>> +static inline dma_addr_t vb2_dma_addr_plus_data_offset(struct
>> vb2_buffer *vb,
>>> + unsigned int plane_no)
>>> +{
>>> + return vb2_dma_contig_plane_dma_addr(vb, plane_no) +
>>> + vb->v4l2_planes[plane_no].data_offset;
>>> +}
>>> +
>>> /*
>>> * Set the headers for all of the address/data block structures.
>>> */
>>> @@ -1043,7 +1051,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int
>>> port)
>>>
>>> vpdma_fmt = fmt->vpdma_fmt[plane];
>>>
>>> - dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane);
>>> + dma_addr = vb2_dma_addr_plus_data_offset(vb, plane);
>>> if (!dma_addr) {
>>> vpe_err(ctx->dev,
>>> "acquiring input buffer(%d) dma_addr failed\n",
>>>
>>
>> Should there be a check somewhere that verifies that
>> vb2_get_plane_payload() -
>> vb->v4l2_planes[plane_no].data_offset is still large enough for the
>> vb->image you
>> want to copy?
>
> Yes, it is done as part of the vb2_qbuf -> __buf_prepare -> __verify_length
> function
> If the data_offset is high enough that it goes out of the length of that
> plane,
> The qbuf ioctl should have failed, So we can safely assume the validity of
> data_offset here
data_offset, yes. But the plane payload as well? Remember that the actual
payload
if data_offset > 0 is bytesused - data_offset.
We probably need helper functions for that in videobuf2-core.h. They aren't
there
yet because data_offset is used so rarely.
Regards,
Hans
>
>>
>> Regards,
>>
>> Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
