The mc5602_brigde.h is included at m5602 submodules. This
causes Gcc 6.1 to complain:
drivers/media/usb/gspca/m5602/m5602_bridge.h:124:28: warning:
'sensor_urb_skeleton' defined but not used [-Wunused-const-variable=]
static const unsigned char sensor_urb_skeleton[] = {
^~~~~~~~~~~~~~~~~~~
drivers/media/usb/gspca/m5602/m5602_bridge.h:119:28: warning:
'bridge_urb_skeleton' defined but not used [-Wunused-const-variable=]
static const unsigned char bridge_urb_skeleton[] = {
^~~~~~~~~~~~~~~~~~~
Let's shut up gcc 6.1 warnings by moving those data structures
to the core, as they're used only there.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
drivers/media/usb/gspca/m5602/m5602_bridge.h | 15 ---------------
drivers/media/usb/gspca/m5602/m5602_core.c | 15 +++++++++++++++
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/media/usb/gspca/m5602/m5602_bridge.h
b/drivers/media/usb/gspca/m5602/m5602_bridge.h
index 19eb1a64f9d6..43ebc03d844d 100644
--- a/drivers/media/usb/gspca/m5602/m5602_bridge.h
+++ b/drivers/media/usb/gspca/m5602/m5602_bridge.h
@@ -115,21 +115,6 @@
/*****************************************************************************/
-/* A skeleton used for sending messages to the m5602 bridge */
-static const unsigned char bridge_urb_skeleton[] = {
- 0x13, 0x00, 0x81, 0x00
-};
-
-/* A skeleton used for sending messages to the sensor */
-static const unsigned char sensor_urb_skeleton[] = {
- 0x23, M5602_XB_GPIO_EN_H, 0x81, 0x06,
- 0x23, M5602_XB_MISC_CTRL, 0x81, 0x80,
- 0x13, M5602_XB_I2C_DEV_ADDR, 0x81, 0x00,
- 0x13, M5602_XB_I2C_REG_ADDR, 0x81, 0x00,
- 0x13, M5602_XB_I2C_DATA, 0x81, 0x00,
- 0x13, M5602_XB_I2C_CTRL, 0x81, 0x11
-};
-
struct sd {
struct gspca_dev gspca_dev;
diff --git a/drivers/media/usb/gspca/m5602/m5602_core.c
b/drivers/media/usb/gspca/m5602/m5602_core.c
index d926e62cb80b..e4a0658e3f83 100644
--- a/drivers/media/usb/gspca/m5602/m5602_core.c
+++ b/drivers/media/usb/gspca/m5602/m5602_core.c
@@ -37,6 +37,21 @@ static const struct usb_device_id m5602_table[] = {
MODULE_DEVICE_TABLE(usb, m5602_table);
+/* A skeleton used for sending messages to the sensor */
+static const unsigned char sensor_urb_skeleton[] = {
+ 0x23, M5602_XB_GPIO_EN_H, 0x81, 0x06,
+ 0x23, M5602_XB_MISC_CTRL, 0x81, 0x80,
+ 0x13, M5602_XB_I2C_DEV_ADDR, 0x81, 0x00,
+ 0x13, M5602_XB_I2C_REG_ADDR, 0x81, 0x00,
+ 0x13, M5602_XB_I2C_DATA, 0x81, 0x00,
+ 0x13, M5602_XB_I2C_CTRL, 0x81, 0x11
+};
+
+/* A skeleton used for sending messages to the m5602 bridge */
+static const unsigned char bridge_urb_skeleton[] = {
+ 0x13, 0x00, 0x81, 0x00
+};
+
/* Reads a byte from the m5602 */
int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data)
{
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
