Em Wed, 6 Jul 2016 16:06:44 -0700
Steve Longerbeam <[email protected]> escreveu:
> This patch implements complete image conversion support to ipu-ic,
> with tiling to support scaling to and from images up to 4096x4096.
> Image rotation is also supported.
>
> The internal API is subsystem agnostic (no V4L2 dependency except
> for the use of V4L2 fourcc pixel formats).
>
> Callers prepare for image conversion by calling
> ipu_image_convert_prepare(), which initializes the parameters of
> the conversion. The caller passes in the ipu_ic task to use for
> the conversion, the input and output image formats, a rotation mode,
> and a completion callback and completion context pointer:
>
> struct image_converter_ctx *
> ipu_image_convert_prepare(struct ipu_ic *ic,
> struct ipu_image *in, struct ipu_image *out,
> enum ipu_rotate_mode rot_mode,
> image_converter_cb_t complete,
> void *complete_context);
>
> The caller is given a new conversion context that must be passed to
> the further APIs:
>
> struct image_converter_run *
> ipu_image_convert_run(struct image_converter_ctx *ctx,
> dma_addr_t in_phys, dma_addr_t out_phys);
>
> This queues a new image conversion request to a run queue, and
> starts the conversion immediately if the run queue is empty. Only
> the physaddr's of the input and output image buffers are needed,
> since the conversion context was created previously with
> ipu_image_convert_prepare(). Returns a new run object pointer. When
> the conversion completes, the run pointer is returned to the
> completion callback.
>
> void image_convert_abort(struct image_converter_ctx *ctx);
>
> This will abort any active or pending conversions for this context.
> Any currently active or pending runs belonging to this context are
> returned via the completion callback with an error status.
>
> void ipu_image_convert_unprepare(struct image_converter_ctx *ctx);
>
> Unprepares the conversion context. Any active or pending runs will
> be aborted by calling image_convert_abort().
> ---
> drivers/gpu/ipu-v3/ipu-ic.c | 1691
> ++++++++++++++++++++++++++++++++++++++++++-
> include/video/imx-ipu-v3.h | 57 +-
> 2 files changed, 1736 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/ipu-v3/ipu-ic.c b/drivers/gpu/ipu-v3/ipu-ic.c
> index 5329bfe..f6a1125 100644
> --- a/drivers/gpu/ipu-v3/ipu-ic.c
> +++ b/drivers/gpu/ipu-v3/ipu-ic.c
> @@ -17,6 +17,8 @@
> #include <linux/bitrev.h>
> #include <linux/io.h>
> #include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/dma-mapping.h>
> #include "ipu-prv.h"
>
> /* IC Register Offsets */
> @@ -82,6 +84,40 @@
> #define IC_IDMAC_3_PP_WIDTH_MASK (0x3ff << 20)
> #define IC_IDMAC_3_PP_WIDTH_OFFSET 20
>
> +/*
> + * The IC Resizer has a restriction that the output frame from the
> + * resizer must be 1024 or less in both width (pixels) and height
> + * (lines).
> + *
> + * The image conversion support attempts to split up a conversion when
> + * the desired output (converted) frame resolution exceeds the IC resizer
> + * limit of 1024 in either dimension.
> + *
> + * If either dimension of the output frame exceeds the limit, the
> + * dimension is split into 1, 2, or 4 equal stripes, for a maximum
> + * of 4*4 or 16 tiles. A conversion is then carried out for each
> + * tile (but taking care to pass the full frame stride length to
> + * the DMA channel's parameter memory!). IDMA double-buffering is used
> + * to convert each tile back-to-back when possible (see note below
> + * when double_buffering boolean is set).
> + *
> + * Note that the input frame must be split up into the same number
> + * of tiles as the output frame.
> + */
> +#define MAX_STRIPES_W 4
> +#define MAX_STRIPES_H 4
> +#define MAX_TILES (MAX_STRIPES_W * MAX_STRIPES_H)
> +
> +#define MIN_W 128
> +#define MIN_H 128
> +#define MAX_W 4096
> +#define MAX_H 4096
> +
> +enum image_convert_type {
> + IMAGE_CONVERT_IN = 0,
> + IMAGE_CONVERT_OUT,
> +};
> +
> struct ic_task_regoffs {
> u32 rsc;
> u32 tpmem_csc[2];
> @@ -96,6 +132,16 @@ struct ic_task_bitfields {
> u32 ic_cmb_galpha_bit;
> };
>
> +struct ic_task_channels {
> + int in;
> + int out;
> + int rot_in;
> + int rot_out;
> + int vdi_in_p;
> + int vdi_in;
> + int vdi_in_n;
> +};
> +
> static const struct ic_task_regoffs ic_task_reg[IC_NUM_TASKS] = {
> [IC_TASK_ENCODER] = {
> .rsc = IC_PRP_ENC_RSC,
> @@ -138,12 +184,159 @@ static const struct ic_task_bitfields
> ic_task_bit[IC_NUM_TASKS] = {
> },
> };
>
> +static const struct ic_task_channels ic_task_ch[IC_NUM_TASKS] = {
> + [IC_TASK_ENCODER] = {
> + .out = IPUV3_CHANNEL_IC_PRP_ENC_MEM,
> + .rot_in = IPUV3_CHANNEL_MEM_ROT_ENC,
> + .rot_out = IPUV3_CHANNEL_ROT_ENC_MEM,
> + },
> + [IC_TASK_VIEWFINDER] = {
> + .in = IPUV3_CHANNEL_MEM_IC_PRP_VF,
> + .out = IPUV3_CHANNEL_IC_PRP_VF_MEM,
> + .rot_in = IPUV3_CHANNEL_MEM_ROT_VF,
> + .rot_out = IPUV3_CHANNEL_ROT_VF_MEM,
> + .vdi_in_p = IPUV3_CHANNEL_MEM_VDI_P,
> + .vdi_in = IPUV3_CHANNEL_MEM_VDI,
> + .vdi_in_n = IPUV3_CHANNEL_MEM_VDI_N,
> + },
> + [IC_TASK_POST_PROCESSOR] = {
> + .in = IPUV3_CHANNEL_MEM_IC_PP,
> + .out = IPUV3_CHANNEL_IC_PP_MEM,
> + .rot_in = IPUV3_CHANNEL_MEM_ROT_PP,
> + .rot_out = IPUV3_CHANNEL_ROT_PP_MEM,
> + },
> +};
> +
> +struct ipu_ic_dma_buf {
> + void *virt;
> + dma_addr_t phys;
> + unsigned long len;
> +};
> +
> +/* dimensions of one tile */
> +struct ipu_ic_tile {
> + unsigned int width;
> + unsigned int height;
> + /* size and strides are in bytes */
> + unsigned int size;
> + unsigned int stride;
> + unsigned int rot_stride;
> +};
> +
> +struct ipu_ic_tile_off {
> + /* start Y or packed offset of this tile */
> + u32 offset;
> + /* offset from start to tile in U plane, for planar formats */
> + u32 u_off;
> + /* offset from start to tile in V plane, for planar formats */
> + u32 v_off;
> +};
> +
> +struct ipu_ic_pixfmt {
> + char *name;
> + u32 fourcc; /* V4L2 fourcc */
> + int bpp; /* total bpp */
> + int y_depth; /* depth of Y plane for planar formats */
> + int uv_width_dec; /* decimation in width for U/V planes */
> + int uv_height_dec; /* decimation in height for U/V planes */
> + bool uv_swapped; /* U and V planes are swapped */
> + bool uv_packed; /* partial planar (U and V in same plane) */
> +};
> +
> +struct ipu_ic_image {
> + struct ipu_image base;
> + enum image_convert_type type;
> +
> + const struct ipu_ic_pixfmt *fmt;
> + unsigned int stride;
> +
> + /* # of rows (horizontal stripes) if dest height is > 1024 */
> + unsigned int num_rows;
> + /* # of columns (vertical stripes) if dest width is > 1024 */
> + unsigned int num_cols;
> +
> + struct ipu_ic_tile tile;
> + struct ipu_ic_tile_off tile_off[MAX_TILES];
> +};
> +
> +struct image_converter_ctx;
> +struct image_converter;
> struct ipu_ic_priv;
> +struct ipu_ic;
> +
> +struct image_converter_run {
> + struct image_converter_ctx *ctx;
> +
> + dma_addr_t in_phys;
> + dma_addr_t out_phys;
> +
> + int status;
> +
> + struct list_head list;
> +};
> +
> +struct image_converter_ctx {
> + struct image_converter *cvt;
> +
> + image_converter_cb_t complete;
> + void *complete_context;
> +
> + /* Source/destination image data and rotation mode */
> + struct ipu_ic_image in;
> + struct ipu_ic_image out;
> + enum ipu_rotate_mode rot_mode;
> +
> + /* intermediate buffer for rotation */
> + struct ipu_ic_dma_buf rot_intermediate[2];
> +
> + /* current buffer number for double buffering */
> + int cur_buf_num;
> +
> + bool aborting;
> + struct completion aborted;
> +
> + /* can we use double-buffering for this conversion operation? */
> + bool double_buffering;
> + /* num_rows * num_cols */
> + unsigned int num_tiles;
> + /* next tile to process */
> + unsigned int next_tile;
> + /* where to place converted tile in dest image */
> + unsigned int out_tile_map[MAX_TILES];
> +
> + struct list_head list;
> +};
> +
> +struct image_converter {
> + struct ipu_ic *ic;
> +
> + struct ipuv3_channel *in_chan;
> + struct ipuv3_channel *out_chan;
> + struct ipuv3_channel *rotation_in_chan;
> + struct ipuv3_channel *rotation_out_chan;
> +
> + /* the IPU end-of-frame irqs */
> + int out_eof_irq;
> + int rot_out_eof_irq;
> +
> + spinlock_t irqlock;
> +
> + /* list of convert contexts */
> + struct list_head ctx_list;
> + /* queue of conversion runs */
> + struct list_head pending_q;
> + /* queue of completed runs */
> + struct list_head done_q;
> +
> + /* the current conversion run */
> + struct image_converter_run *current_run;
> +};
>
> struct ipu_ic {
> enum ipu_ic_task task;
> const struct ic_task_regoffs *reg;
> const struct ic_task_bitfields *bit;
> + const struct ic_task_channels *ch;
>
> enum ipu_color_space in_cs, g_in_cs;
> enum ipu_color_space out_cs;
> @@ -151,6 +344,8 @@ struct ipu_ic {
> bool rotation;
> bool in_use;
>
> + struct image_converter cvt;
> +
> struct ipu_ic_priv *priv;
> };
>
> @@ -619,7 +814,7 @@ int ipu_ic_task_idma_init(struct ipu_ic *ic, struct
> ipuv3_channel *channel,
> ipu_ic_write(ic, ic_idmac_2, IC_IDMAC_2);
> ipu_ic_write(ic, ic_idmac_3, IC_IDMAC_3);
>
> - if (rot >= IPU_ROTATE_90_RIGHT)
> + if (ipu_rot_mode_is_irt(rot))
> ic->rotation = true;
>
> unlock:
> @@ -661,6 +856,1480 @@ static void ipu_irt_disable(struct ipu_ic *ic)
> priv->irt_use_count = 0;
> }
>
> +/*
> + * Complete image conversion support follows
> + */
> +
> +static const struct ipu_ic_pixfmt ipu_ic_formats[] = {
> + {
> + .name = "RGB565",
> + .fourcc = V4L2_PIX_FMT_RGB565,
> + .bpp = 16,
> + }, {
> + .name = "RGB24",
> + .fourcc = V4L2_PIX_FMT_RGB24,
> + .bpp = 24,
> + }, {
> + .name = "BGR24",
> + .fourcc = V4L2_PIX_FMT_BGR24,
> + .bpp = 24,
> + }, {
> + .name = "RGB32",
> + .fourcc = V4L2_PIX_FMT_RGB32,
> + .bpp = 32,
> + }, {
> + .name = "BGR32",
> + .fourcc = V4L2_PIX_FMT_BGR32,
> + .bpp = 32,
> + }, {
> + .name = "4:2:2 packed, YUYV",
> + .fourcc = V4L2_PIX_FMT_YUYV,
> + .bpp = 16,
> + .uv_width_dec = 2,
> + .uv_height_dec = 1,
> + }, {
> + .name = "4:2:2 packed, UYVY",
> + .fourcc = V4L2_PIX_FMT_UYVY,
> + .bpp = 16,
> + .uv_width_dec = 2,
> + .uv_height_dec = 1,
> + }, {
> + .name = "4:2:0 planar, YUV",
> + .fourcc = V4L2_PIX_FMT_YUV420,
> + .bpp = 12,
> + .y_depth = 8,
> + .uv_width_dec = 2,
> + .uv_height_dec = 2,
> + }, {
> + .name = "4:2:0 planar, YVU",
> + .fourcc = V4L2_PIX_FMT_YVU420,
> + .bpp = 12,
> + .y_depth = 8,
> + .uv_width_dec = 2,
> + .uv_height_dec = 2,
> + .uv_swapped = true,
> + }, {
> + .name = "4:2:0 partial planar, NV12",
> + .fourcc = V4L2_PIX_FMT_NV12,
> + .bpp = 12,
> + .y_depth = 8,
> + .uv_width_dec = 2,
> + .uv_height_dec = 2,
> + .uv_packed = true,
> + }, {
> + .name = "4:2:2 planar, YUV",
> + .fourcc = V4L2_PIX_FMT_YUV422P,
> + .bpp = 16,
> + .y_depth = 8,
> + .uv_width_dec = 2,
> + .uv_height_dec = 1,
> + }, {
> + .name = "4:2:2 partial planar, NV16",
> + .fourcc = V4L2_PIX_FMT_NV16,
> + .bpp = 16,
> + .y_depth = 8,
> + .uv_width_dec = 2,
> + .uv_height_dec = 1,
> + .uv_packed = true,
> + },
> +};
> +
> +static const struct ipu_ic_pixfmt *ipu_ic_get_format(u32 fourcc)
> +{
> + const struct ipu_ic_pixfmt *ret = NULL;
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ipu_ic_formats); i++) {
> + if (ipu_ic_formats[i].fourcc == fourcc) {
> + ret = &ipu_ic_formats[i];
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static void ipu_ic_dump_format(struct image_converter_ctx *ctx,
> + struct ipu_ic_image *ic_image)
> +{
> + struct ipu_ic_priv *priv = ctx->cvt->ic->priv;
> +
> + dev_dbg(priv->ipu->dev,
> + "ctx %p: %s format: %dx%d (%dx%d tiles of size %dx%d),
> %c%c%c%c\n",
> + ctx,
> + ic_image->type == IMAGE_CONVERT_OUT ? "Output" : "Input",
> + ic_image->base.pix.width, ic_image->base.pix.height,
> + ic_image->num_cols, ic_image->num_rows,
> + ic_image->tile.width, ic_image->tile.height,
> + ic_image->fmt->fourcc & 0xff,
> + (ic_image->fmt->fourcc >> 8) & 0xff,
> + (ic_image->fmt->fourcc >> 16) & 0xff,
> + (ic_image->fmt->fourcc >> 24) & 0xff);
> +}
> +
> +int ipu_image_convert_enum_format(int index, const char **desc, u32 *fourcc)
> +{
> + const struct ipu_ic_pixfmt *fmt;
> +
> + if (index >= (int)ARRAY_SIZE(ipu_ic_formats))
> + return -EINVAL;
> +
> + /* Format found */
> + fmt = &ipu_ic_formats[index];
> + *desc = fmt->name;
> + *fourcc = fmt->fourcc;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_enum_format);
> +
> +static void ipu_ic_free_dma_buf(struct ipu_ic_priv *priv,
> + struct ipu_ic_dma_buf *buf)
> +{
> + if (buf->virt)
> + dma_free_coherent(priv->ipu->dev,
> + buf->len, buf->virt, buf->phys);
> + buf->virt = NULL;
> + buf->phys = 0;
> +}
> +
> +static int ipu_ic_alloc_dma_buf(struct ipu_ic_priv *priv,
> + struct ipu_ic_dma_buf *buf,
> + int size)
> +{
> + unsigned long newlen = PAGE_ALIGN(size);
> +
> + if (buf->virt) {
> + if (buf->len == newlen)
> + return 0;
> + ipu_ic_free_dma_buf(priv, buf);
> + }
> +
> + buf->len = newlen;
> + buf->virt = dma_alloc_coherent(priv->ipu->dev, buf->len, &buf->phys,
> + GFP_DMA | GFP_KERNEL);
> + if (!buf->virt) {
> + dev_err(priv->ipu->dev, "failed to alloc dma buffer\n");
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +static inline int ipu_ic_num_stripes(int dim)
> +{
> + if (dim <= 1024)
> + return 1;
> + else if (dim <= 2048)
> + return 2;
> + else
> + return 4;
> +}
> +
> +static void ipu_ic_calc_tile_dimensions(struct image_converter_ctx *ctx,
> + struct ipu_ic_image *image)
> +{
> + struct ipu_ic_tile *tile = &image->tile;
> +
> + tile->height = image->base.pix.height / image->num_rows;
> + tile->width = image->base.pix.width / image->num_cols;
> + tile->size = ((tile->height * image->fmt->bpp) >> 3) * tile->width;
> +
> + if (image->fmt->y_depth) {
> + tile->stride = (image->fmt->y_depth * tile->width) >> 3;
> + tile->rot_stride = (image->fmt->y_depth * tile->height) >> 3;
> + } else {
> + tile->stride = (image->fmt->bpp * tile->width) >> 3;
> + tile->rot_stride = (image->fmt->bpp * tile->height) >> 3;
> + }
> +}
> +
> +/*
> + * Use the rotation transformation to find the tile coordinates
> + * (row, col) of a tile in the destination frame that corresponds
> + * to the given tile coordinates of a source frame. The destination
> + * coordinate is then converted to a tile index.
> + */
> +static int ipu_ic_transform_tile_index(struct image_converter_ctx *ctx,
> + int src_row, int src_col)
> +{
We don't do image rotation in software inside the Kernel! This is
something that should be done either by some hardware block or
in userspace.
> + struct ipu_ic_priv *priv = ctx->cvt->ic->priv;
> + struct ipu_ic_image *s_image = &ctx->in;
> + struct ipu_ic_image *d_image = &ctx->out;
> + int cos, sin, dst_row, dst_col;
> +
> + /* with no rotation it's a 1:1 mapping */
> + if (ctx->rot_mode == IPU_ROTATE_NONE)
> + return src_row * s_image->num_cols + src_col;
> +
> + if (ctx->rot_mode & IPU_ROT_BIT_90) {
> + cos = 0;
> + sin = 1;
> + } else {
> + cos = 1;
> + sin = 0;
> + }
> +
> + /*
> + * before doing the transform, first we have to translate
> + * source row,col for an origin in the center of s_image
> + */
> + src_row *= 2;
> + src_col *= 2;
> + src_row -= s_image->num_rows - 1;
> + src_col -= s_image->num_cols - 1;
> +
> + /* do the rotation transform */
> + dst_col = src_col * cos - src_row * sin;
> + dst_row = src_col * sin + src_row * cos;
> +
> + /* apply flip */
> + if (ctx->rot_mode & IPU_ROT_BIT_HFLIP)
> + dst_col = -dst_col;
> + if (ctx->rot_mode & IPU_ROT_BIT_VFLIP)
> + dst_row = -dst_row;
> +
> + dev_dbg(priv->ipu->dev, "ctx %p: [%d,%d] --> [%d,%d]\n",
> + ctx, src_col, src_row, dst_col, dst_row);
> +
> + /*
> + * finally translate dest row,col using an origin in upper
> + * left of d_image
> + */
> + dst_row += d_image->num_rows - 1;
> + dst_col += d_image->num_cols - 1;
> + dst_row /= 2;
> + dst_col /= 2;
> +
> + return dst_row * d_image->num_cols + dst_col;
> +}
> +
> +/*
> + * Fill the out_tile_map[] with transformed destination tile indeces.
> + */
> +static void ipu_ic_calc_out_tile_map(struct image_converter_ctx *ctx)
> +{
> + struct ipu_ic_image *s_image = &ctx->in;
> + unsigned int row, col, tile = 0;
> +
> + for (row = 0; row < s_image->num_rows; row++) {
> + for (col = 0; col < s_image->num_cols; col++) {
> + ctx->out_tile_map[tile] =
> + ipu_ic_transform_tile_index(ctx, row, col);
> + tile++;
> + }
> + }
> +}
> +
> +static void ipu_ic_calc_tile_offsets_planar(struct image_converter_ctx *ctx,
> + struct ipu_ic_image *image)
> +{
We also don't do image conversions inside the Kernel. Same applies
to other similar codes on this patch.
> + struct ipu_ic_priv *priv = ctx->cvt->ic->priv;
> + const struct ipu_ic_pixfmt *fmt = image->fmt;
> + unsigned int row, col, tile = 0;
> + u32 H, w, h, y_depth, y_stride, uv_stride;
> + u32 uv_row_off, uv_col_off, uv_off, u_off, v_off, tmp;
> + u32 y_row_off, y_col_off, y_off;
> + u32 y_size, uv_size;
> +
> + /* setup some convenience vars */
> + H = image->base.pix.height;
> + w = image->tile.width;
> + h = image->tile.height;
> +
> + y_depth = fmt->y_depth;
> + y_stride = image->stride;
> + uv_stride = y_stride / fmt->uv_width_dec;
> + if (fmt->uv_packed)
> + uv_stride *= 2;
> +
> + y_size = H * y_stride;
> + uv_size = y_size / (fmt->uv_width_dec * fmt->uv_height_dec);
> +
> + for (row = 0; row < image->num_rows; row++) {
> + y_row_off = row * h * y_stride;
> + uv_row_off = (row * h * uv_stride) / fmt->uv_height_dec;
> +
> + for (col = 0; col < image->num_cols; col++) {
> + y_col_off = (col * w * y_depth) >> 3;
> + uv_col_off = y_col_off / fmt->uv_width_dec;
> + if (fmt->uv_packed)
> + uv_col_off *= 2;
> +
> + y_off = y_row_off + y_col_off;
> + uv_off = uv_row_off + uv_col_off;
> +
> + u_off = y_size - y_off + uv_off;
> + v_off = (fmt->uv_packed) ? 0 : u_off + uv_size;
> + if (fmt->uv_swapped) {
> + tmp = u_off;
> + u_off = v_off;
> + v_off = tmp;
> + }
> +
> + image->tile_off[tile].offset = y_off;
> + image->tile_off[tile].u_off = u_off;
> + image->tile_off[tile++].v_off = v_off;
> +
> + dev_dbg(priv->ipu->dev,
> + "ctx %p: %s@[%d,%d]: y_off %08x, u_off %08x,
> v_off %08x\n",
> + ctx, image->type == IMAGE_CONVERT_IN ?
> + "Input" : "Output", row, col,
> + y_off, u_off, v_off);
> + }
> + }
> +}
> +
> +static void ipu_ic_calc_tile_offsets_packed(struct image_converter_ctx *ctx,
> + struct ipu_ic_image *image)
> +{
> + struct ipu_ic_priv *priv = ctx->cvt->ic->priv;
> + const struct ipu_ic_pixfmt *fmt = image->fmt;
> + unsigned int row, col, tile = 0;
> + u32 w, h, bpp, stride;
> + u32 row_off, col_off;
> +
> + /* setup some convenience vars */
> + w = image->tile.width;
> + h = image->tile.height;
> + stride = image->stride;
> + bpp = fmt->bpp;
> +
> + for (row = 0; row < image->num_rows; row++) {
> + row_off = row * h * stride;
> +
> + for (col = 0; col < image->num_cols; col++) {
> + col_off = (col * w * bpp) >> 3;
> +
> + image->tile_off[tile].offset = row_off + col_off;
> + image->tile_off[tile].u_off = 0;
> + image->tile_off[tile++].v_off = 0;
> +
> + dev_dbg(priv->ipu->dev,
> + "ctx %p: %s@[%d,%d]: phys %08x\n", ctx,
> + image->type == IMAGE_CONVERT_IN ?
> + "Input" : "Output", row, col,
> + row_off + col_off);
> + }
> + }
> +}
> +
> +static void ipu_ic_calc_tile_offsets(struct image_converter_ctx *ctx,
> + struct ipu_ic_image *image)
> +{
> + memset(image->tile_off, 0, sizeof(image->tile_off));
> +
> + if (image->fmt->y_depth)
> + ipu_ic_calc_tile_offsets_planar(ctx, image);
> + else
> + ipu_ic_calc_tile_offsets_packed(ctx, image);
> +}
> +
> +/*
> + * return the number of runs in given queue (pending_q or done_q)
> + * for this context. hold irqlock when calling.
> + */
> +static int ipu_ic_get_run_count(struct image_converter_ctx *ctx,
> + struct list_head *q)
> +{
> + struct image_converter_run *run;
> + int count = 0;
> +
> + list_for_each_entry(run, q, list) {
> + if (run->ctx == ctx)
> + count++;
> + }
> +
> + return count;
> +}
> +
> +/* hold irqlock when calling */
> +static void ipu_ic_convert_stop(struct image_converter_run *run)
> +{
> + struct image_converter_ctx *ctx = run->ctx;
> + struct image_converter *cvt = ctx->cvt;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> +
> + dev_dbg(priv->ipu->dev, "%s: stopping ctx %p run %p\n",
> + __func__, ctx, run);
> +
> + /* disable IC tasks and the channels */
> + ipu_ic_task_disable(cvt->ic);
> + ipu_idmac_disable_channel(cvt->in_chan);
> + ipu_idmac_disable_channel(cvt->out_chan);
> +
> + if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + ipu_idmac_disable_channel(cvt->rotation_in_chan);
> + ipu_idmac_disable_channel(cvt->rotation_out_chan);
> + ipu_idmac_unlink(cvt->out_chan, cvt->rotation_in_chan);
> + }
> +
> + ipu_ic_disable(cvt->ic);
> +}
> +
> +/* hold irqlock when calling */
> +static void init_idmac_channel(struct image_converter_ctx *ctx,
> + struct ipuv3_channel *channel,
> + struct ipu_ic_image *image,
> + enum ipu_rotate_mode rot_mode,
> + bool rot_swap_width_height)
> +{
> + struct image_converter *cvt = ctx->cvt;
> + unsigned int burst_size;
> + u32 width, height, stride;
> + dma_addr_t addr0, addr1 = 0;
> + struct ipu_image tile_image;
> + unsigned int tile_idx[2];
> +
> + if (image->type == IMAGE_CONVERT_OUT) {
> + tile_idx[0] = ctx->out_tile_map[0];
> + tile_idx[1] = ctx->out_tile_map[1];
> + } else {
> + tile_idx[0] = 0;
> + tile_idx[1] = 1;
> + }
> +
> + if (rot_swap_width_height) {
> + width = image->tile.height;
> + height = image->tile.width;
> + stride = image->tile.rot_stride;
> + addr0 = ctx->rot_intermediate[0].phys;
> + if (ctx->double_buffering)
> + addr1 = ctx->rot_intermediate[1].phys;
> + } else {
> + width = image->tile.width;
> + height = image->tile.height;
> + stride = image->stride;
> + addr0 = image->base.phys0 +
> + image->tile_off[tile_idx[0]].offset;
> + if (ctx->double_buffering)
> + addr1 = image->base.phys0 +
> + image->tile_off[tile_idx[1]].offset;
> + }
> +
> + ipu_cpmem_zero(channel);
> +
> + memset(&tile_image, 0, sizeof(tile_image));
> + tile_image.pix.width = tile_image.rect.width = width;
> + tile_image.pix.height = tile_image.rect.height = height;
> + tile_image.pix.bytesperline = stride;
> + tile_image.pix.pixelformat = image->fmt->fourcc;
> + tile_image.phys0 = addr0;
> + tile_image.phys1 = addr1;
> + ipu_cpmem_set_image(channel, &tile_image);
> +
> + if (image->fmt->y_depth && !rot_swap_width_height)
> + ipu_cpmem_set_uv_offset(channel,
> + image->tile_off[tile_idx[0]].u_off,
> + image->tile_off[tile_idx[0]].v_off);
> +
> + if (rot_mode)
> + ipu_cpmem_set_rotation(channel, rot_mode);
> +
> + if (channel == cvt->rotation_in_chan ||
> + channel == cvt->rotation_out_chan) {
> + burst_size = 8;
> + ipu_cpmem_set_block_mode(channel);
> + } else
> + burst_size = (width % 16) ? 8 : 16;
> +
> + ipu_cpmem_set_burstsize(channel, burst_size);
> +
> + ipu_ic_task_idma_init(cvt->ic, channel, width, height,
> + burst_size, rot_mode);
> +
> + ipu_cpmem_set_axi_id(channel, 1);
> +
> + ipu_idmac_set_double_buffer(channel, ctx->double_buffering);
> +}
> +
> +/* hold irqlock when calling */
> +static int ipu_ic_convert_start(struct image_converter_run *run)
> +{
> + struct image_converter_ctx *ctx = run->ctx;
> + struct image_converter *cvt = ctx->cvt;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + struct ipu_ic_image *s_image = &ctx->in;
> + struct ipu_ic_image *d_image = &ctx->out;
> + enum ipu_color_space src_cs, dest_cs;
> + unsigned int dest_width, dest_height;
> + int ret;
> +
> + dev_dbg(priv->ipu->dev, "%s: starting ctx %p run %p\n",
> + __func__, ctx, run);
> +
> + src_cs = ipu_pixelformat_to_colorspace(s_image->fmt->fourcc);
> + dest_cs = ipu_pixelformat_to_colorspace(d_image->fmt->fourcc);
> +
> + if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + /* swap width/height for resizer */
> + dest_width = d_image->tile.height;
> + dest_height = d_image->tile.width;
> + } else {
> + dest_width = d_image->tile.width;
> + dest_height = d_image->tile.height;
> + }
> +
> + /* setup the IC resizer and CSC */
> + ret = ipu_ic_task_init(cvt->ic,
> + s_image->tile.width,
> + s_image->tile.height,
> + dest_width,
> + dest_height,
> + src_cs, dest_cs);
> + if (ret) {
> + dev_err(priv->ipu->dev, "ipu_ic_task_init failed, %d\n", ret);
> + return ret;
> + }
> +
> + /* init the source MEM-->IC PP IDMAC channel */
> + init_idmac_channel(ctx, cvt->in_chan, s_image,
> + IPU_ROTATE_NONE, false);
> +
> + if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + /* init the IC PP-->MEM IDMAC channel */
> + init_idmac_channel(ctx, cvt->out_chan, d_image,
> + IPU_ROTATE_NONE, true);
> +
> + /* init the MEM-->IC PP ROT IDMAC channel */
> + init_idmac_channel(ctx, cvt->rotation_in_chan, d_image,
> + ctx->rot_mode, true);
> +
> + /* init the destination IC PP ROT-->MEM IDMAC channel */
> + init_idmac_channel(ctx, cvt->rotation_out_chan, d_image,
> + IPU_ROTATE_NONE, false);
> +
> + /* now link IC PP-->MEM to MEM-->IC PP ROT */
> + ipu_idmac_link(cvt->out_chan, cvt->rotation_in_chan);
> + } else {
> + /* init the destination IC PP-->MEM IDMAC channel */
> + init_idmac_channel(ctx, cvt->out_chan, d_image,
> + ctx->rot_mode, false);
> + }
> +
> + /* enable the IC */
> + ipu_ic_enable(cvt->ic);
> +
> + /* set buffers ready */
> + ipu_idmac_select_buffer(cvt->in_chan, 0);
> + ipu_idmac_select_buffer(cvt->out_chan, 0);
> + if (ipu_rot_mode_is_irt(ctx->rot_mode))
> + ipu_idmac_select_buffer(cvt->rotation_out_chan, 0);
> + if (ctx->double_buffering) {
> + ipu_idmac_select_buffer(cvt->in_chan, 1);
> + ipu_idmac_select_buffer(cvt->out_chan, 1);
> + if (ipu_rot_mode_is_irt(ctx->rot_mode))
> + ipu_idmac_select_buffer(cvt->rotation_out_chan, 1);
> + }
> +
> + /* enable the channels! */
> + ipu_idmac_enable_channel(cvt->in_chan);
> + ipu_idmac_enable_channel(cvt->out_chan);
> + if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + ipu_idmac_enable_channel(cvt->rotation_in_chan);
> + ipu_idmac_enable_channel(cvt->rotation_out_chan);
> + }
> +
> + ipu_ic_task_enable(cvt->ic);
> +
> + ipu_cpmem_dump(cvt->in_chan);
> + ipu_cpmem_dump(cvt->out_chan);
> + if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + ipu_cpmem_dump(cvt->rotation_in_chan);
> + ipu_cpmem_dump(cvt->rotation_out_chan);
> + }
> +
> + ipu_dump(priv->ipu);
> +
> + return 0;
> +}
> +
> +/* hold irqlock when calling */
> +static int ipu_ic_run(struct image_converter_run *run)
> +{
> + struct image_converter_ctx *ctx = run->ctx;
> + struct image_converter *cvt = ctx->cvt;
> +
> + ctx->in.base.phys0 = run->in_phys;
> + ctx->out.base.phys0 = run->out_phys;
> +
> + ctx->cur_buf_num = 0;
> + ctx->next_tile = 1;
> +
> + /* remove run from pending_q and set as current */
> + list_del(&run->list);
> + cvt->current_run = run;
> +
> + return ipu_ic_convert_start(run);
> +}
> +
> +/* hold irqlock when calling */
> +static void ipu_ic_run_next(struct image_converter *cvt)
> +{
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + struct image_converter_run *run, *tmp;
> + int ret;
> +
> + list_for_each_entry_safe(run, tmp, &cvt->pending_q, list) {
> + /* skip contexts that are aborting */
> + if (run->ctx->aborting) {
> + dev_dbg(priv->ipu->dev,
> + "%s: skipping aborting ctx %p run %p\n",
> + __func__, run->ctx, run);
> + continue;
> + }
> +
> + ret = ipu_ic_run(run);
> + if (!ret)
> + break;
> +
> + /*
> + * something went wrong with start, add the run
> + * to done q and continue to the next run in the
> + * pending q.
> + */
> + run->status = ret;
> + list_add_tail(&run->list, &cvt->done_q);
> + cvt->current_run = NULL;
> + }
> +}
> +
> +static void ipu_ic_empty_done_q(struct image_converter *cvt)
> +{
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + struct image_converter_run *run;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + while (!list_empty(&cvt->done_q)) {
> + run = list_entry(cvt->done_q.next,
> + struct image_converter_run,
> + list);
> +
> + list_del(&run->list);
> +
> + dev_dbg(priv->ipu->dev,
> + "%s: completing ctx %p run %p with %d\n",
> + __func__, run->ctx, run, run->status);
> +
> + /* call the completion callback and free the run */
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> + run->ctx->complete(run->ctx->complete_context, run,
> + run->status);
> + kfree(run);
> + spin_lock_irqsave(&cvt->irqlock, flags);
> + }
> +
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +}
> +
> +/*
> + * the bottom half thread clears out the done_q, calling the
> + * completion handler for each.
> + */
> +static irqreturn_t ipu_ic_bh(int irq, void *dev_id)
> +{
> + struct image_converter *cvt = dev_id;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + struct image_converter_ctx *ctx;
> + unsigned long flags;
> +
> + dev_dbg(priv->ipu->dev, "%s: enter\n", __func__);
> +
> + ipu_ic_empty_done_q(cvt);
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + /*
> + * the done_q is cleared out, signal any contexts
> + * that are aborting that abort can complete.
> + */
> + list_for_each_entry(ctx, &cvt->ctx_list, list) {
> + if (ctx->aborting) {
> + dev_dbg(priv->ipu->dev,
> + "%s: signaling abort for ctx %p\n",
> + __func__, ctx);
> + complete(&ctx->aborted);
> + }
> + }
> +
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +
> + dev_dbg(priv->ipu->dev, "%s: exit\n", __func__);
> + return IRQ_HANDLED;
> +}
> +
> +/* hold irqlock when calling */
> +static irqreturn_t ipu_ic_doirq(struct image_converter_run *run)
> +{
> + struct image_converter_ctx *ctx = run->ctx;
> + struct image_converter *cvt = ctx->cvt;
> + struct ipu_ic_tile_off *src_off, *dst_off;
> + struct ipu_ic_image *s_image = &ctx->in;
> + struct ipu_ic_image *d_image = &ctx->out;
> + struct ipuv3_channel *outch;
> + unsigned int dst_idx;
> +
> + outch = ipu_rot_mode_is_irt(ctx->rot_mode) ?
> + cvt->rotation_out_chan : cvt->out_chan;
> +
> + /*
> + * It is difficult to stop the channel DMA before the channels
> + * enter the paused state. Without double-buffering the channels
> + * are always in a paused state when the EOF irq occurs, so it
> + * is safe to stop the channels now. For double-buffering we
> + * just ignore the abort until the operation completes, when it
> + * is safe to shut down.
> + */
> + if (ctx->aborting && !ctx->double_buffering) {
> + ipu_ic_convert_stop(run);
> + run->status = -EIO;
> + goto done;
> + }
> +
> + if (ctx->next_tile == ctx->num_tiles) {
> + /*
> + * the conversion is complete
> + */
> + ipu_ic_convert_stop(run);
> + run->status = 0;
> + goto done;
> + }
> +
> + /*
> + * not done, place the next tile buffers.
> + */
> + if (!ctx->double_buffering) {
> +
> + src_off = &s_image->tile_off[ctx->next_tile];
> + dst_idx = ctx->out_tile_map[ctx->next_tile];
> + dst_off = &d_image->tile_off[dst_idx];
> +
> + ipu_cpmem_set_buffer(cvt->in_chan, 0,
> + s_image->base.phys0 + src_off->offset);
> + ipu_cpmem_set_buffer(outch, 0,
> + d_image->base.phys0 + dst_off->offset);
> + if (s_image->fmt->y_depth)
> + ipu_cpmem_set_uv_offset(cvt->in_chan,
> + src_off->u_off,
> + src_off->v_off);
> + if (d_image->fmt->y_depth)
> + ipu_cpmem_set_uv_offset(outch,
> + dst_off->u_off,
> + dst_off->v_off);
> +
> + ipu_idmac_select_buffer(cvt->in_chan, 0);
> + ipu_idmac_select_buffer(outch, 0);
> +
> + } else if (ctx->next_tile < ctx->num_tiles - 1) {
> +
> + src_off = &s_image->tile_off[ctx->next_tile + 1];
> + dst_idx = ctx->out_tile_map[ctx->next_tile + 1];
> + dst_off = &d_image->tile_off[dst_idx];
> +
> + ipu_cpmem_set_buffer(cvt->in_chan, ctx->cur_buf_num,
> + s_image->base.phys0 + src_off->offset);
> + ipu_cpmem_set_buffer(outch, ctx->cur_buf_num,
> + d_image->base.phys0 + dst_off->offset);
> +
> + ipu_idmac_select_buffer(cvt->in_chan, ctx->cur_buf_num);
> + ipu_idmac_select_buffer(outch, ctx->cur_buf_num);
> +
> + ctx->cur_buf_num ^= 1;
> + }
> +
> + ctx->next_tile++;
> + return IRQ_HANDLED;
> +done:
> + list_add_tail(&run->list, &cvt->done_q);
> + cvt->current_run = NULL;
> + ipu_ic_run_next(cvt);
> + return IRQ_WAKE_THREAD;
> +}
> +
> +static irqreturn_t ipu_ic_norotate_irq(int irq, void *data)
> +{
> + struct image_converter *cvt = data;
> + struct image_converter_ctx *ctx;
> + struct image_converter_run *run;
> + unsigned long flags;
> + irqreturn_t ret;
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + /* get current run and its context */
> + run = cvt->current_run;
> + if (!run) {
> + ret = IRQ_NONE;
> + goto out;
> + }
> +
> + ctx = run->ctx;
> +
> + if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + /* this is a rotation operation, just ignore */
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> + return IRQ_HANDLED;
> + }
> +
> + ret = ipu_ic_doirq(run);
> +out:
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> + return ret;
> +}
> +
> +static irqreturn_t ipu_ic_rotate_irq(int irq, void *data)
> +{
> + struct image_converter *cvt = data;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + struct image_converter_ctx *ctx;
> + struct image_converter_run *run;
> + unsigned long flags;
> + irqreturn_t ret;
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + /* get current run and its context */
> + run = cvt->current_run;
> + if (!run) {
> + ret = IRQ_NONE;
> + goto out;
> + }
> +
> + ctx = run->ctx;
> +
> + if (!ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + /* this was NOT a rotation operation, shouldn't happen */
> + dev_err(priv->ipu->dev, "Unexpected rotation interrupt\n");
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> + return IRQ_HANDLED;
> + }
> +
> + ret = ipu_ic_doirq(run);
> +out:
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> + return ret;
> +}
> +
> +/*
> + * try to force the completion of runs for this ctx. Called when
> + * abort wait times out in ipu_image_convert_abort().
> + */
> +static void ipu_ic_force_abort(struct image_converter_ctx *ctx)
> +{
> + struct image_converter *cvt = ctx->cvt;
> + struct image_converter_run *run;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + run = cvt->current_run;
> + if (run && run->ctx == ctx) {
> + ipu_ic_convert_stop(run);
> + run->status = -EIO;
> + list_add_tail(&run->list, &cvt->done_q);
> + cvt->current_run = NULL;
> + ipu_ic_run_next(cvt);
> + }
> +
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +
> + ipu_ic_empty_done_q(cvt);
> +}
> +
> +static void ipu_ic_release_ipu_resources(struct image_converter *cvt)
> +{
> + if (cvt->out_eof_irq >= 0)
> + free_irq(cvt->out_eof_irq, cvt);
> + if (cvt->rot_out_eof_irq >= 0)
> + free_irq(cvt->rot_out_eof_irq, cvt);
> +
> + if (!IS_ERR_OR_NULL(cvt->in_chan))
> + ipu_idmac_put(cvt->in_chan);
> + if (!IS_ERR_OR_NULL(cvt->out_chan))
> + ipu_idmac_put(cvt->out_chan);
> + if (!IS_ERR_OR_NULL(cvt->rotation_in_chan))
> + ipu_idmac_put(cvt->rotation_in_chan);
> + if (!IS_ERR_OR_NULL(cvt->rotation_out_chan))
> + ipu_idmac_put(cvt->rotation_out_chan);
> +
> + cvt->in_chan = cvt->out_chan = cvt->rotation_in_chan =
> + cvt->rotation_out_chan = NULL;
> + cvt->out_eof_irq = cvt->rot_out_eof_irq = -1;
> +}
> +
> +static int ipu_ic_get_ipu_resources(struct image_converter *cvt)
> +{
> + const struct ic_task_channels *chan = cvt->ic->ch;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + int ret;
> +
> + /* get IDMAC channels */
> + cvt->in_chan = ipu_idmac_get(priv->ipu, chan->in);
> + cvt->out_chan = ipu_idmac_get(priv->ipu, chan->out);
> + if (IS_ERR(cvt->in_chan) || IS_ERR(cvt->out_chan)) {
> + dev_err(priv->ipu->dev, "could not acquire idmac channels\n");
> + ret = -EBUSY;
> + goto err;
> + }
> +
> + cvt->rotation_in_chan = ipu_idmac_get(priv->ipu, chan->rot_in);
> + cvt->rotation_out_chan = ipu_idmac_get(priv->ipu, chan->rot_out);
> + if (IS_ERR(cvt->rotation_in_chan) || IS_ERR(cvt->rotation_out_chan)) {
> + dev_err(priv->ipu->dev,
> + "could not acquire idmac rotation channels\n");
> + ret = -EBUSY;
> + goto err;
> + }
> +
> + /* acquire the EOF interrupts */
> + cvt->out_eof_irq = ipu_idmac_channel_irq(priv->ipu,
> + cvt->out_chan,
> + IPU_IRQ_EOF);
> +
> + ret = request_threaded_irq(cvt->out_eof_irq,
> + ipu_ic_norotate_irq, ipu_ic_bh,
> + 0, "ipu-ic", cvt);
> + if (ret < 0) {
> + dev_err(priv->ipu->dev, "could not acquire irq %d\n",
> + cvt->out_eof_irq);
> + cvt->out_eof_irq = -1;
> + goto err;
> + }
> +
> + cvt->rot_out_eof_irq = ipu_idmac_channel_irq(priv->ipu,
> + cvt->rotation_out_chan,
> + IPU_IRQ_EOF);
> +
> + ret = request_threaded_irq(cvt->rot_out_eof_irq,
> + ipu_ic_rotate_irq, ipu_ic_bh,
> + 0, "ipu-ic", cvt);
> + if (ret < 0) {
> + dev_err(priv->ipu->dev, "could not acquire irq %d\n",
> + cvt->rot_out_eof_irq);
> + cvt->rot_out_eof_irq = -1;
> + goto err;
> + }
> +
> + return 0;
> +err:
> + ipu_ic_release_ipu_resources(cvt);
> + return ret;
> +}
> +
> +static int ipu_ic_fill_image(struct image_converter_ctx *ctx,
> + struct ipu_ic_image *ic_image,
> + struct ipu_image *image,
> + enum image_convert_type type)
> +{
> + struct ipu_ic_priv *priv = ctx->cvt->ic->priv;
> +
> + ic_image->base = *image;
> + ic_image->type = type;
> +
> + ic_image->fmt = ipu_ic_get_format(image->pix.pixelformat);
> + if (!ic_image->fmt) {
> + dev_err(priv->ipu->dev, "pixelformat not supported for %s\n",
> + type == IMAGE_CONVERT_OUT ? "Output" : "Input");
> + return -EINVAL;
> + }
> +
> + if (ic_image->fmt->y_depth)
> + ic_image->stride = (ic_image->fmt->y_depth *
> + ic_image->base.pix.width) >> 3;
> + else
> + ic_image->stride = ic_image->base.pix.bytesperline;
> +
> + ipu_ic_calc_tile_dimensions(ctx, ic_image);
> + ipu_ic_calc_tile_offsets(ctx, ic_image);
> +
> + return 0;
> +}
> +
> +/* borrowed from drivers/media/v4l2-core/v4l2-common.c */
> +static unsigned int clamp_align(unsigned int x, unsigned int min,
> + unsigned int max, unsigned int align)
> +{
> + /* Bits that must be zero to be aligned */
> + unsigned int mask = ~((1 << align) - 1);
> +
> + /* Clamp to aligned min and max */
> + x = clamp(x, (min + ~mask) & mask, max & mask);
> +
> + /* Round to nearest aligned value */
> + if (align)
> + x = (x + (1 << (align - 1))) & mask;
> +
> + return x;
> +}
> +
> +/*
> + * We have to adjust the tile width such that the tile physaddrs and
> + * U and V plane offsets are multiples of 8 bytes as required by
> + * the IPU DMA Controller. For the planar formats, this corresponds
> + * to a pixel alignment of 16 (but use a more formal equation since
> + * the variables are available). For all the packed formats, 8 is
> + * good enough.
> + */
> +static inline u32 tile_width_align(const struct ipu_ic_pixfmt *fmt)
> +{
> + return fmt->y_depth ? (64 * fmt->uv_width_dec) / fmt->y_depth : 8;
> +}
> +
> +/*
> + * For tile height alignment, we have to ensure that the output tile
> + * heights are multiples of 8 lines if the IRT is required by the
> + * given rotation mode (the IRT performs rotations on 8x8 blocks
> + * at a time). If the IRT is not used, or for input image tiles,
> + * 2 lines are good enough.
> + */
> +static inline u32 tile_height_align(enum image_convert_type type,
> + enum ipu_rotate_mode rot_mode)
> +{
> + return (type == IMAGE_CONVERT_OUT &&
> + ipu_rot_mode_is_irt(rot_mode)) ? 8 : 2;
> +}
> +
> +/* Adjusts input/output images to IPU restrictions */
> +int ipu_image_convert_adjust(struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode)
> +{
> + const struct ipu_ic_pixfmt *infmt, *outfmt;
> + unsigned int num_in_rows, num_in_cols;
> + unsigned int num_out_rows, num_out_cols;
> + u32 w_align, h_align;
> +
> + infmt = ipu_ic_get_format(in->pix.pixelformat);
> + outfmt = ipu_ic_get_format(out->pix.pixelformat);
> +
> + /* set some defaults if needed */
> + if (!infmt) {
> + in->pix.pixelformat = V4L2_PIX_FMT_RGB24;
> + infmt = ipu_ic_get_format(V4L2_PIX_FMT_RGB24);
> + }
> + if (!outfmt) {
> + out->pix.pixelformat = V4L2_PIX_FMT_RGB24;
> + outfmt = ipu_ic_get_format(V4L2_PIX_FMT_RGB24);
> + }
> +
> + if (!in->pix.width || !in->pix.height) {
> + in->pix.width = 640;
> + in->pix.height = 480;
> + }
> + if (!out->pix.width || !out->pix.height) {
> + out->pix.width = 640;
> + out->pix.height = 480;
> + }
> +
> + /* image converter does not handle fields */
> + in->pix.field = out->pix.field = V4L2_FIELD_NONE;
> +
> + /* resizer cannot downsize more than 4:1 */
> + if (ipu_rot_mode_is_irt(rot_mode)) {
> + out->pix.height = max_t(__u32, out->pix.height,
> + in->pix.width / 4);
> + out->pix.width = max_t(__u32, out->pix.width,
> + in->pix.height / 4);
> + } else {
> + out->pix.width = max_t(__u32, out->pix.width,
> + in->pix.width / 4);
> + out->pix.height = max_t(__u32, out->pix.height,
> + in->pix.height / 4);
> + }
> +
> + /* get tiling rows/cols from output format */
> + num_out_rows = ipu_ic_num_stripes(out->pix.height);
> + num_out_cols = ipu_ic_num_stripes(out->pix.width);
> + if (ipu_rot_mode_is_irt(rot_mode)) {
> + num_in_rows = num_out_cols;
> + num_in_cols = num_out_rows;
> + } else {
> + num_in_rows = num_out_rows;
> + num_in_cols = num_out_cols;
> + }
> +
> + /* align input width/height */
> + w_align = ilog2(tile_width_align(infmt) * num_in_cols);
> + h_align = ilog2(tile_height_align(IMAGE_CONVERT_IN, rot_mode) *
> + num_in_rows);
> + in->pix.width = clamp_align(in->pix.width, MIN_W, MAX_W, w_align);
> + in->pix.height = clamp_align(in->pix.height, MIN_H, MAX_H, h_align);
> +
> + /* align output width/height */
> + w_align = ilog2(tile_width_align(outfmt) * num_out_cols);
> + h_align = ilog2(tile_height_align(IMAGE_CONVERT_OUT, rot_mode) *
> + num_out_rows);
> + out->pix.width = clamp_align(out->pix.width, MIN_W, MAX_W, w_align);
> + out->pix.height = clamp_align(out->pix.height, MIN_H, MAX_H, h_align);
> +
> + /* set input/output strides and image sizes */
> + in->pix.bytesperline = (in->pix.width * infmt->bpp) >> 3;
> + in->pix.sizeimage = in->pix.height * in->pix.bytesperline;
> + out->pix.bytesperline = (out->pix.width * outfmt->bpp) >> 3;
> + out->pix.sizeimage = out->pix.height * out->pix.bytesperline;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_adjust);
> +
> +/*
> + * this is used by ipu_image_convert_prepare() to verify set input and
> + * output images are valid before starting the conversion. Clients can
> + * also call it before calling ipu_image_convert_prepare().
> + */
> +int ipu_image_convert_verify(struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode)
> +{
> + struct ipu_image testin, testout;
> + int ret;
> +
> + testin = *in;
> + testout = *out;
> +
> + ret = ipu_image_convert_adjust(&testin, &testout, rot_mode);
> + if (ret)
> + return ret;
> +
> + if (testin.pix.width != in->pix.width ||
> + testin.pix.height != in->pix.height ||
> + testout.pix.width != out->pix.width ||
> + testout.pix.height != out->pix.height)
> + return -EINVAL;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_verify);
> +
> +/*
> + * Call ipu_image_convert_prepare() to prepare for the conversion of
> + * given images and rotation mode. Returns a new conversion context.
> + */
> +struct image_converter_ctx *
> +ipu_image_convert_prepare(struct ipu_ic *ic,
> + struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode,
> + image_converter_cb_t complete,
> + void *complete_context)
> +{
> + struct ipu_ic_priv *priv = ic->priv;
> + struct image_converter *cvt = &ic->cvt;
> + struct ipu_ic_image *s_image, *d_image;
> + struct image_converter_ctx *ctx;
> + unsigned long flags;
> + bool get_res;
> + int ret;
> +
> + if (!ic || !in || !out || !complete)
> + return ERR_PTR(-EINVAL);
> +
> + /* verify the in/out images before continuing */
> + ret = ipu_image_convert_verify(in, out, rot_mode);
> + if (ret) {
> + dev_err(priv->ipu->dev, "%s: in/out formats invalid\n",
> + __func__);
> + return ERR_PTR(ret);
> + }
> +
> + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return ERR_PTR(-ENOMEM);
> +
> + dev_dbg(priv->ipu->dev, "%s: ctx %p\n", __func__, ctx);
> +
> + ctx->cvt = cvt;
> + init_completion(&ctx->aborted);
> +
> + s_image = &ctx->in;
> + d_image = &ctx->out;
> +
> + /* set tiling and rotation */
> + d_image->num_rows = ipu_ic_num_stripes(out->pix.height);
> + d_image->num_cols = ipu_ic_num_stripes(out->pix.width);
> + if (ipu_rot_mode_is_irt(rot_mode)) {
> + s_image->num_rows = d_image->num_cols;
> + s_image->num_cols = d_image->num_rows;
> + } else {
> + s_image->num_rows = d_image->num_rows;
> + s_image->num_cols = d_image->num_cols;
> + }
> +
> + ctx->num_tiles = d_image->num_cols * d_image->num_rows;
> + ctx->rot_mode = rot_mode;
> +
> + ret = ipu_ic_fill_image(ctx, s_image, in, IMAGE_CONVERT_IN);
> + if (ret)
> + goto out_free;
> + ret = ipu_ic_fill_image(ctx, d_image, out, IMAGE_CONVERT_OUT);
> + if (ret)
> + goto out_free;
> +
> + ipu_ic_calc_out_tile_map(ctx);
> +
> + ipu_ic_dump_format(ctx, s_image);
> + ipu_ic_dump_format(ctx, d_image);
> +
> + ctx->complete = complete;
> + ctx->complete_context = complete_context;
> +
> + /*
> + * Can we use double-buffering for this operation? If there is
> + * only one tile (the whole image can be converted in a single
> + * operation) there's no point in using double-buffering. Also,
> + * the IPU's IDMAC channels allow only a single U and V plane
> + * offset shared between both buffers, but these offsets change
> + * for every tile, and therefore would have to be updated for
> + * each buffer which is not possible. So double-buffering is
> + * impossible when either the source or destination images are
> + * a planar format (YUV420, YUV422P, etc.).
> + */
> + ctx->double_buffering = (ctx->num_tiles > 1 &&
> + !s_image->fmt->y_depth &&
> + !d_image->fmt->y_depth);
> +
> + if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
> + ret = ipu_ic_alloc_dma_buf(priv, &ctx->rot_intermediate[0],
> + d_image->tile.size);
> + if (ret)
> + goto out_free;
> + if (ctx->double_buffering) {
> + ret = ipu_ic_alloc_dma_buf(priv,
> + &ctx->rot_intermediate[1],
> + d_image->tile.size);
> + if (ret)
> + goto out_free_dmabuf0;
> + }
> + }
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + get_res = list_empty(&cvt->ctx_list);
> +
> + list_add_tail(&ctx->list, &cvt->ctx_list);
> +
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +
> + if (get_res) {
> + ret = ipu_ic_get_ipu_resources(cvt);
> + if (ret)
> + goto out_free_dmabuf1;
> + }
> +
> + return ctx;
> +
> +out_free_dmabuf1:
> + ipu_ic_free_dma_buf(priv, &ctx->rot_intermediate[1]);
> + spin_lock_irqsave(&cvt->irqlock, flags);
> + list_del(&ctx->list);
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +out_free_dmabuf0:
> + ipu_ic_free_dma_buf(priv, &ctx->rot_intermediate[0]);
> +out_free:
> + kfree(ctx);
> + return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_prepare);
> +
> +/*
> + * Carry out a single image conversion. Only the physaddr's of the input
> + * and output image buffers are needed. The conversion context must have
> + * been created previously with ipu_image_convert_prepare(). Returns the
> + * new run object.
> + */
> +struct image_converter_run *
> +ipu_image_convert_run(struct image_converter_ctx *ctx,
> + dma_addr_t in_phys, dma_addr_t out_phys)
> +{
> + struct image_converter *cvt = ctx->cvt;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + struct image_converter_run *run;
> + unsigned long flags;
> + int ret = 0;
> +
> + run = kzalloc(sizeof(*run), GFP_KERNEL);
> + if (!run)
> + return ERR_PTR(-ENOMEM);
> +
> + run->ctx = ctx;
> + run->in_phys = in_phys;
> + run->out_phys = out_phys;
> +
> + dev_dbg(priv->ipu->dev, "%s: ctx %p run %p\n", __func__,
> + ctx, run);
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + if (ctx->aborting) {
> + ret = -EIO;
> + goto unlock;
> + }
> +
> + list_add_tail(&run->list, &cvt->pending_q);
> +
> + if (!cvt->current_run) {
> + ret = ipu_ic_run(run);
> + if (ret)
> + cvt->current_run = NULL;
> + }
> +unlock:
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +
> + if (ret) {
> + kfree(run);
> + run = ERR_PTR(ret);
> + }
> +
> + return run;
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_run);
> +
> +/* Abort any active or pending conversions for this context */
> +void ipu_image_convert_abort(struct image_converter_ctx *ctx)
> +{
> + struct image_converter *cvt = ctx->cvt;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + struct image_converter_run *run, *active_run, *tmp;
> + unsigned long flags;
> + int run_count, ret;
> + bool need_abort;
> +
> + reinit_completion(&ctx->aborted);
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + /* move all remaining pending runs in this context to done_q */
> + list_for_each_entry_safe(run, tmp, &cvt->pending_q, list) {
> + if (run->ctx != ctx)
> + continue;
> + run->status = -EIO;
> + list_move_tail(&run->list, &cvt->done_q);
> + }
> +
> + run_count = ipu_ic_get_run_count(ctx, &cvt->done_q);
> + active_run = (cvt->current_run && cvt->current_run->ctx == ctx) ?
> + cvt->current_run : NULL;
> +
> + need_abort = (run_count || active_run);
> +
> + ctx->aborting = need_abort;
> +
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +
> + if (!need_abort) {
> + dev_dbg(priv->ipu->dev, "%s: no abort needed for ctx %p\n",
> + __func__, ctx);
> + return;
> + }
> +
> + dev_dbg(priv->ipu->dev,
> + "%s: wait for completion: %d runs, active run %p\n",
> + __func__, run_count, active_run);
> +
> + ret = wait_for_completion_timeout(&ctx->aborted,
> + msecs_to_jiffies(10000));
> + if (ret == 0) {
> + dev_warn(priv->ipu->dev, "%s: timeout\n", __func__);
> + ipu_ic_force_abort(ctx);
> + }
> +
> + ctx->aborting = false;
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_abort);
> +
> +/* Unprepare image conversion context */
> +void ipu_image_convert_unprepare(struct image_converter_ctx *ctx)
> +{
> + struct image_converter *cvt = ctx->cvt;
> + struct ipu_ic_priv *priv = cvt->ic->priv;
> + unsigned long flags;
> + bool put_res;
> +
> + /* make sure no runs are hanging around */
> + ipu_image_convert_abort(ctx);
> +
> + dev_dbg(priv->ipu->dev, "%s: removing ctx %p\n", __func__, ctx);
> +
> + spin_lock_irqsave(&cvt->irqlock, flags);
> +
> + list_del(&ctx->list);
> +
> + put_res = list_empty(&cvt->ctx_list);
> +
> + spin_unlock_irqrestore(&cvt->irqlock, flags);
> +
> + if (put_res)
> + ipu_ic_release_ipu_resources(cvt);
> +
> + ipu_ic_free_dma_buf(priv, &ctx->rot_intermediate[1]);
> + ipu_ic_free_dma_buf(priv, &ctx->rot_intermediate[0]);
> +
> + kfree(ctx);
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_unprepare);
> +
> +/*
> + * "Canned" asynchronous single image conversion. On successful return
> + * caller must call ipu_image_convert_unprepare() after conversion completes.
> + * Returns the new conversion context.
> + */
> +struct image_converter_ctx *
> +ipu_image_convert(struct ipu_ic *ic,
> + struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode,
> + image_converter_cb_t complete,
> + void *complete_context)
> +{
> + struct image_converter_ctx *ctx;
> + struct image_converter_run *run;
> +
> + ctx = ipu_image_convert_prepare(ic, in, out, rot_mode,
> + complete, complete_context);
> + if (IS_ERR(ctx))
> + return ctx;
> +
> + run = ipu_image_convert_run(ctx, in->phys0, out->phys0);
> + if (IS_ERR(run)) {
> + ipu_image_convert_unprepare(ctx);
> + return ERR_PTR(PTR_ERR(run));
> + }
> +
> + return ctx;
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert);
> +
> +/* "Canned" synchronous single image conversion */
> +static void image_convert_sync_complete(void *data,
> + struct image_converter_run *run,
> + int err)
> +{
> + struct completion *comp = data;
> +
> + complete(comp);
> +}
> +
> +int ipu_image_convert_sync(struct ipu_ic *ic,
> + struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode)
> +{
> + struct image_converter_ctx *ctx;
> + struct completion comp;
> + int ret;
> +
> + init_completion(&comp);
> +
> + ctx = ipu_image_convert(ic, in, out, rot_mode,
> + image_convert_sync_complete, &comp);
> + if (IS_ERR(ctx))
> + return PTR_ERR(ctx);
> +
> + ret = wait_for_completion_timeout(&comp, msecs_to_jiffies(10000));
> + ret = (ret == 0) ? -ETIMEDOUT : 0;
> +
> + ipu_image_convert_unprepare(ctx);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ipu_image_convert_sync);
> +
> int ipu_ic_enable(struct ipu_ic *ic)
> {
> struct ipu_ic_priv *priv = ic->priv;
> @@ -759,6 +2428,7 @@ int ipu_ic_init(struct ipu_soc *ipu, struct device *dev,
> ipu->ic_priv = priv;
>
> spin_lock_init(&priv->lock);
> +
> priv->base = devm_ioremap(dev, base, PAGE_SIZE);
> if (!priv->base)
> return -ENOMEM;
> @@ -771,10 +2441,21 @@ int ipu_ic_init(struct ipu_soc *ipu, struct device
> *dev,
> priv->ipu = ipu;
>
> for (i = 0; i < IC_NUM_TASKS; i++) {
> - priv->task[i].task = i;
> - priv->task[i].priv = priv;
> - priv->task[i].reg = &ic_task_reg[i];
> - priv->task[i].bit = &ic_task_bit[i];
> + struct ipu_ic *ic = &priv->task[i];
> + struct image_converter *cvt = &ic->cvt;
> +
> + ic->task = i;
> + ic->priv = priv;
> + ic->reg = &ic_task_reg[i];
> + ic->bit = &ic_task_bit[i];
> + ic->ch = &ic_task_ch[i];
> +
> + cvt->ic = ic;
> + spin_lock_init(&cvt->irqlock);
> + INIT_LIST_HEAD(&cvt->ctx_list);
> + INIT_LIST_HEAD(&cvt->pending_q);
> + INIT_LIST_HEAD(&cvt->done_q);
> + cvt->out_eof_irq = cvt->rot_out_eof_irq = -1;
> }
>
> return 0;
> diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
> index 8f77ddb..5938a69 100644
> --- a/include/video/imx-ipu-v3.h
> +++ b/include/video/imx-ipu-v3.h
> @@ -63,17 +63,25 @@ enum ipu_csi_dest {
> /*
> * Enumeration of IPU rotation modes
> */
> +#define IPU_ROT_BIT_VFLIP (1 << 0)
> +#define IPU_ROT_BIT_HFLIP (1 << 1)
> +#define IPU_ROT_BIT_90 (1 << 2)
> +
> enum ipu_rotate_mode {
> IPU_ROTATE_NONE = 0,
> - IPU_ROTATE_VERT_FLIP,
> - IPU_ROTATE_HORIZ_FLIP,
> - IPU_ROTATE_180,
> - IPU_ROTATE_90_RIGHT,
> - IPU_ROTATE_90_RIGHT_VFLIP,
> - IPU_ROTATE_90_RIGHT_HFLIP,
> - IPU_ROTATE_90_LEFT,
> + IPU_ROTATE_VERT_FLIP = IPU_ROT_BIT_VFLIP,
> + IPU_ROTATE_HORIZ_FLIP = IPU_ROT_BIT_HFLIP,
> + IPU_ROTATE_180 = (IPU_ROT_BIT_VFLIP | IPU_ROT_BIT_HFLIP),
> + IPU_ROTATE_90_RIGHT = IPU_ROT_BIT_90,
> + IPU_ROTATE_90_RIGHT_VFLIP = (IPU_ROT_BIT_90 | IPU_ROT_BIT_VFLIP),
> + IPU_ROTATE_90_RIGHT_HFLIP = (IPU_ROT_BIT_90 | IPU_ROT_BIT_HFLIP),
> + IPU_ROTATE_90_LEFT = (IPU_ROT_BIT_90 |
> + IPU_ROT_BIT_VFLIP | IPU_ROT_BIT_HFLIP),
> };
>
> +/* 90-degree rotations require the IRT unit */
> +#define ipu_rot_mode_is_irt(m) ((m) >= IPU_ROTATE_90_RIGHT)
> +
> enum ipu_color_space {
> IPUV3_COLORSPACE_RGB,
> IPUV3_COLORSPACE_YUV,
> @@ -320,6 +328,7 @@ enum ipu_ic_task {
> };
>
> struct ipu_ic;
> +
> int ipu_ic_task_init(struct ipu_ic *ic,
> int in_width, int in_height,
> int out_width, int out_height,
> @@ -335,6 +344,40 @@ int ipu_ic_task_idma_init(struct ipu_ic *ic, struct
> ipuv3_channel *channel,
> u32 width, u32 height, int burst_size,
> enum ipu_rotate_mode rot);
> int ipu_ic_set_src(struct ipu_ic *ic, int csi_id, bool vdi);
> +
> +struct image_converter_ctx;
> +struct image_converter_run;
> +
> +typedef void (*image_converter_cb_t)(void *ctx,
> + struct image_converter_run *run,
> + int err);
> +
> +int ipu_image_convert_enum_format(int index, const char **desc, u32 *fourcc);
> +int ipu_image_convert_adjust(struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode);
> +int ipu_image_convert_verify(struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode);
> +struct image_converter_ctx *
> +ipu_image_convert_prepare(struct ipu_ic *ic,
> + struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode,
> + image_converter_cb_t complete,
> + void *complete_context);
> +void ipu_image_convert_unprepare(struct image_converter_ctx *ctx);
> +struct image_converter_run *
> +ipu_image_convert_run(struct image_converter_ctx *ctx,
> + dma_addr_t in_phys, dma_addr_t out_phys);
> +void ipu_image_convert_abort(struct image_converter_ctx *ctx);
> +struct image_converter_ctx *
> +ipu_image_convert(struct ipu_ic *ic,
> + struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode,
> + image_converter_cb_t complete,
> + void *complete_context);
> +int ipu_image_convert_sync(struct ipu_ic *ic,
> + struct ipu_image *in, struct ipu_image *out,
> + enum ipu_rotate_mode rot_mode);
> +
> int ipu_ic_enable(struct ipu_ic *ic);
> int ipu_ic_disable(struct ipu_ic *ic);
> struct ipu_ic *ipu_ic_get(struct ipu_soc *ipu, enum ipu_ic_task task);
Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
