Bob Deblier wrote: > On Sat, 2009-02-07 at 23:03 +0100, Ruediger Dohmhardt wrote: >> Manu Abraham schrieb: >>> Ruediger Dohmhardt wrote: >>> >>>> Manu Abraham schrieb: >>>> >>>>> Have added initial support for this card, as well as a large >>>>> overhaul of the driver for a couple of performance impacts. >>>>> >>>>> Please do test with the latest updates from http://jusst.de/hg/mantis. >>>>> >>>>> >>>> Hi Manu >>>> the versions from January and February 2009 compile fine on the >>>> SUSE-11.1 kernel 2.6.27.7-9-default x86_64. >>>> The modules for my Twinhan AD-CP300 (2033) load fine, too. >>>> >>>> However, the devices below /dev/dvb are NOT created, and hence vdr-1.7 >>>> does not work. >>>> The card works with the s2-liplianin driver. >>>> >>>> I assume it is interrupt related as listed in the lines from >>>> /var/log/messages >>>> >>>> >>>> Feb 7 21:03:38 mt40 su: (to root) rudi on /dev/pts/1 >>>> Feb 7 21:03:48 mt40 kernel: vendor=1002 device=4371 >>>> Feb 7 21:03:48 mt40 kernel: Mantis 0000:02:01.0: PCI INT A -> GSI 21 >>>> (level, low) -> IRQ 21 >>>> Feb 7 21:03:48 mt40 kernel: DVB: registering new adapter (Mantis DVB >>>> adapter) >>>> Feb 7 21:03:48 mt40 kernel: vendor=1002 device=4371 >>>> Feb 7 21:03:48 mt40 kernel: Mantis 0000:02:01.0: PCI INT A disabled >>>> Feb 7 21:03:48 mt40 kernel: Mantis: probe of 0000:02:01.0 failed with >>>> error -1 >>>> Feb 7 21:05:03 mt40 vdr: [4320] cTimeMs: using monotonic clock >>>> (resolution is 1 ns) >>>> Feb 7 21:05:03 mt40 vdr: [4320] VDR version 1.7.0 started >>>> Feb 7 21:05:03 mt40 vdr: [4320] codeset is 'UTF-8' - known >>>> Feb 7 21:05:03 mt40 vdr: [4320] ERROR: ./locale: Datei oder Verzeichnis >>>> nicht gefunden >>>> Feb 7 21:05:03 mt40 vdr: [4320] no locale for language code 'deu,ger' >>>> Feb 7 21:05:03 mt40 vdr: [4320] no locale for language code 'slv,slo' >>>> Feb 7 21:05:03 mt40 vdr: [4320] no locale for language code 'ita' >>>> Feb 7 21:05:05 mt40 vdr: [4320] no DVB device found >>>> >>>> I wonder whether I can check something more to get your driver back to work >>>> >>> Can you please load the mantis module with the verbose=5 module >>> parameter and try again ? At least it will show what's failing. >>> >>> Regards, >>> Manu >>> >>> >> Yupp, >> >> here is /var/log/messages with the line "options mantis verbose=5" in >> /etc/modprobe.conf.local >> >> Feb 7 22:56:41 mt40 kernel: found a VP-2033 PCI DVB-C device on (02:01.0), >> Feb 7 22:56:41 mt40 kernel: vendor=1002 device=4371 >> Feb 7 22:56:41 mt40 kernel: Mantis 0000:02:01.0: PCI INT A -> GSI 21 >> (level, low) -> IRQ 21 >> Feb 7 22:56:41 mt40 kernel: Mantis Rev 1 [1822:0008], irq: 21, >> latency: 64 >> Feb 7 22:56:41 mt40 kernel: memory: 0x0, mmio: 0xffffc20000366000 >> Feb 7 22:56:41 mt40 kernel: mantis_stream_control (0): Set stream to HIF >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_init (0): Initializing I2C .. >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_init (0): Disabling I2C interrupt >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_write: Address=[0x50] >> <W>[ 08 ] >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_read: Address=[0x50] >> <R>[ 00 08 ca 19 e9 b6 ] >> Feb 7 22:56:41 mt40 kernel: MAC Address=[00:08:ca:19:e9:b6] >> Feb 7 22:56:41 mt40 kernel: mantis_dma_init (0): Mantis DMA init >> Feb 7 22:56:41 mt40 kernel: mantis_alloc_buffers (0): DMA=0x60df0000 >> cpu=0xffff880060df0000 size=65536 >> Feb 7 22:56:41 mt40 kernel: mantis_alloc_buffers (0): RISC=0x60dba000 >> cpu=0xffff880060dba000 size=1000 >> Feb 7 22:56:41 mt40 kernel: mantis_calc_lines (0): Mantis RISC block >> bytes=[4096], line bytes=[2048], line count=[32] >> Feb 7 22:56:41 mt40 kernel: mantis_dvb_init (0): dvb_register_adapter >> Feb 7 22:56:41 mt40 kernel: DVB: registering new adapter (Mantis DVB >> adapter) >> Feb 7 22:56:41 mt40 kernel: mantis_dvb_init (0): dvb_dmx_init >> Feb 7 22:56:41 mt40 kernel: mantis_dvb_init (0): dvb_dmxdev_init >> Feb 7 22:56:41 mt40 kernel: vp2033_frontend_init (0): Probing for >> CU1216 (DVB-C) >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 >> Feb 7 22:56:41 mt40 kernel: Byte MODE: >> Feb 7 22:56:41 mt40 kernel: Byte <0> RXD=0xa1ff2280 [22] >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 >> Feb 7 22:56:41 mt40 kernel: Byte MODE: >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): I/O error, >> LINE:155 >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 >> Feb 7 22:56:41 mt40 kernel: Byte MODE: >> Feb 7 22:56:41 mt40 kernel: Byte <0> RXD=0xa1ff2280 [22] >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:1 >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_write: Address=[0x0c] >> <W>[ 00 33 ] >> Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 >> Feb 7 22:56:42 mt40 kernel: Byte MODE: >> Feb 7 22:56:42 mt40 kernel: mantis_i2c_xfer (0): I/O error, >> LINE:155 >> Feb 7 22:56:42 mt40 kernel: mantis_dvb_init (0): !!! NO Frontends found !!! >> Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis DVB >> initialization failed <-1> >> Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis DMA >> exit! <-1> >> Feb 7 22:56:42 mt40 kernel: mantis_dma_exit (0): DMA=0x60df0000 >> cpu=0xffff880060df0000 size=65536 >> Feb 7 22:56:42 mt40 kernel: mantis_dma_exit (0): RISC=0x60dba000 >> cpu=0xffff880060dba000 size=1000 >> Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis I2C >> exit! <-1> >> Feb 7 22:56:42 mt40 kernel: mantis_i2c_exit (0): Disabling I2C interrupt >> Feb 7 22:56:42 mt40 kernel: mantis_i2c_exit (0): Removing I2C adapter >> Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis PCI >> exit! <-1> >> Feb 7 22:56:42 mt40 kernel: mantis_pci_exit (0): mem: 0xffffc20000366000 >> Feb 7 22:56:42 mt40 kernel: vendor=1002 device=4371 >> Feb 7 22:56:42 mt40 kernel: Mantis 0000:02:01.0: PCI INT A disabled >> Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis free! <-1> >> Feb 7 22:56:42 mt40 kernel: Mantis: probe of 0000:02:01.0 failed with >> error -1 > > Identical problem for me, so it's not a single case. I'll see if I can > also produce a verbose=5 report later today. >
It should be fixed by now. Please try again with the latest changes. Regards, Manu -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
