-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 * On 15.03.2009 01:25, Markus Rechberger wrote: >> Hi Markus, >> >> that's cool... but which tree is the one you actually do speak about? >> v4l-dvb-experimental? As stated... I've already tried it without any >> success. :( >> > > this tree doesn't exist anymore it's just a symlink to the split out > em28xx driver on mcentral.de > you should try your luck with the linuxtv.org/hg/v4l-dvb repository Okay, thank you!
>> Other than this I am out of ideas... but you could mean >> userspace-drivers though, is this the tree to go? The page the README >> file points to is outdated by the way... >> > > those things are not relevant for your device, no drivers on > mcentral.de are relevant for your device. Interesting... thought they'd be the right drivers to get the device working due to the (possibly outdated) information on it's wiki page... > read your first dmesg log carefully and try to obtain the xc3028 > firmware and put it to /lib/firmwar Well, that seems to be some sort of problem. I found this site (and several others during March, 14th) http://lists-archives.org/video4linux/20835-extract-tool-for-xc3028-firmware.html which shows how to extract the firmware file in question. It doesn't seem to fit my card though... I've done it anyways though. No error messages printed by the drivers anymore, just the normal output: [16398.130540] Linux video capture interface: v2.00 [16398.176622] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [16398.177500] cx88[0]: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60,autodetected], frontend(s): 1 [16398.177504] cx88[0]: TV tuner type 71, Radio tuner type 71 [16398.185553] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [16398.326195] tveeprom 4-0050: Huh, no eeprom present (err=-6)? [16398.326200] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [16398.326207] cx88[0]/2: cx2388x 8802 Driver Manager [16398.326221] cx88-mpeg driver manager 0000:07:00.2: enabling device (0000 -> 0002) [16398.326231] cx88-mpeg driver manager 0000:07:00.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [16398.326240] cx88-mpeg driver manager 0000:07:00.2: setting latency timer to 64 [16398.326249] cx88[0]/2: found at 0000:07:00.2, rev: 5, irq: 22, latency: 64, mmio: 0x8e000000 [16398.330880] cx8800 0000:07:00.0: enabling device (0000 -> 0002) [16398.330890] cx8800 0000:07:00.0: PCI INT A -> GSI 22 (level, low) - -> IRQ 22 [16398.330899] cx88[0]/0: found at 0000:07:00.0, rev: 5, irq: 22, latency: 0, mmio: 0x8c000000 [16398.330908] cx8800 0000:07:00.0: setting latency timer to 64 [16398.331217] cx88[0]/0: registered device video0 [v4l2] [16398.331249] cx88[0]/0: registered device vbi0 [16398.331284] cx88[0]/0: registered device radio0 [16398.353479] cx88/2: cx2388x dvb driver version 0.0.6 loaded [16398.353483] cx88/2: registering cx8802 driver, type: dvb access: shared [16398.353486] cx88[0]/2: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60] [16398.353489] cx88[0]/2: cx2388x based DVB/ATSC card [16398.353491] cx8802_alloc_frontends() allocating 1 frontend(s) [16398.362618] xc2028 4-0061: creating new instance [16398.362621] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [16398.362624] cx88[0]/2: xc3028 attached [16398.362628] DVB: registering new adapter (cx88[0]) [16398.362632] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Here comes the interesting part, though: radio -s is finding no stations (this is not critical for me, but indicates some misbehavior) and dvbscan does only output "Unable to query frontend status" (Exit code 1.) After running dvbcan, dmesg grows by following messages: [16485.369819] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [16485.374523] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [16485.374629] cx88[0]: Calling XC2028/3028 callback [16485.374632] cx88[0]: setting GPIO to radio! [16487.371046] xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [16487.371053] cx88[0]: Calling XC2028/3028 callback [16487.371055] cx88[0]: setting GPIO to radio! [16491.995176] xc2028 4-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. [16492.039958] xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [16492.080028] cx88[0]: Calling XC2028/3028 callback I've also been curious about analog TV (which is my premier "want to get it working" aim)... with no luck. tvtime-scanner scanned and scanned and scanned without finding any station. New messages after running tvtime-scanner: [16491.995176] xc2028 4-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. [16492.039958] xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [16492.080028] cx88[0]: Calling XC2028/3028 callback So... I guess nothing is working sadly... I'm really not sure whether the correct firmware is used. This HVR firmware file is said to be "generic" (more or less), but your firmware package for Pinnacle devices does include a lot of other firmware files which seem not to include this "*-v27.fw" file either... Thank you once again for helping out. Best regards, Mihai -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQIcBAEBCgAGBQJJvFeHAAoJEB/WLtluJTqHQFgP/2mDAgLz28No8YwGu5TMu3eN s//kEu2G3bUp3gwQ/ijz8C2GTMO8Ioei+ptwyELetet3gUK/yBs0xf5jLTldw2iz BkvOQ0P+nPKcHQ87eB21TmRxSZOunju9fjQc/euMOY625QCFqsw7z6pru77ATOC/ SpJHRVJpTrycFY6Xt67edO2URcrBJQuF+MDDkZhUec4CGMCxxxM/FmJ0KoohEMuI re1ci/Dh0untENo9Up4i1MkcpfUFQoKcXddZQj56FPovQFbmF7Wb2CoRToXnr6mR cVu3CTTJ64BKpBBqzq0nZu3bmvk5eo9Z3WpfvBZJ32d6umZzix53sOsSXk22Dko6 D2hg78va/kKBw5YJ+fvwZmlBOJingZkH78VkTgzVNvO8O6fH+jPm0w1tou3oExxg 6tKixARkDrwF4KiFEXsEaP/e0D+A6FvfsS1CL5DxSiXe7XDLoWPZ+RGjOdoKx1jX Y3PoWV1plVHkiZOz22mgnQUuO7et96/gxpWUXkugYqSgvgG4D2d/j0t1WsS2yCfw pdJEyGvtwrMpiuokrp28TRqUaeqZAGCYyJs0xIzvs1sdz//3yX0aBZvv7DrBlGoZ 3POk1vXjdi0ECj9SAg/cnHfyvmDijUbVTMd+aRpqz9xos2WG5FHvZj0jsCLDAreE oDAr1qlnvbXj78ySD/eQ =SQzv -----END PGP SIGNATURE----- -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
